Proliphix EPA-20 Bedienungsanleitung

Proliphix EPA-20 and EPA-60 Installation Guide

Release 1.0

Part No. 600-01004-000, Rev. 2

April 2008

Beta Draft Confidential

ii Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0

Part No. 600-01004-000, Rev. 2

Technical

Support

When contacting Proliphix, Inc. for technical assistance, please have the following information available:

Product model and serial number.

Type of heating/cooling system (example: gas, oil, or electric; warm air, hot water, heat pum p,

steam or gravity).

Location and number of wires attached to your Prolip hix thermostat.

For additional assistance, please contact Proliphix, Inc. Technical Support,

9:00 AM to 5:00 PM Eastern Standard Time Monday to Friday:

Web: www.Proliphix.com

Email: [email protected]

Telephone: 1-866-IPLIVING

Fax: 978-692-3378

Warranty

Information

Proliphix, Inc. warrants its products to be free from manufacturing defe cts in mate rials and workmanship

under normal use for a period of 1 year for Professional and Basic Series Thermostats, Thermal Management

Network Thermostats, Ethernet Power Adapters and Thermal Sensors from the date of purchase.

Proliphix shall not be liable to honor the terms of this warranty if the product has been used in any other

application other than that for which it was intended, or if it has been subjected to misuse, accidental damage,

acts of God, modification, or improper installation procedures. Furthermore, this warranty covers only

products which have all original and unaltered markings and labels (serial numbers, model numbers, etc.) of

manufacture. This limited warranty does not cover the repair of cracked, scratched, broken or modified

plastics; other cosmetic damage; or parts that have been altered, defaced or removed; or the scratching,

cracking or breakage of the product.

This warranty is not transferable.

THE FOREGOING WARRANTIES ARE THE SOLE AND EXCLUSIVE WARRANTIES EXPRESS OR

IMPLIED GIVEN BY PROLIPHIX IN CONNECTION WITH THE PRODUCT, AND PROLIP HIX

DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRIN GEMENT OF

THIRD PARTY RIGHTS. PROLIPHIX DOES NOT PROMISE THAT THE PRODUCT IS ERROR-FREE

OR WILL OPERATE WITHOUT INTERRUPTION. PROLIPHIX WILL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER LOSSES, EXPENSES OR

DAMAGES RELATING TO PRODUCT DEFECTS OR FA ILURES. CUSTOMER'S SOLE REMEDY, AND

PROLIPHIX'S SOLE OBLIGATION, WITH RESPECT TO ANY PRODUCT DEFECTS OR FAILURES

(REGARDLESS OF WHETHER YOUR CLAIM IS ASSERTED IN CONTRACT, TORT, STRICT

LIABILITY OR OTHERWISE) SHALL BE (AT PROLIPHIX'S SOLE OPTION) REPAIR, REPLACEMENT

OR REFUND OF THE PRICE PAID. IN NO EVENT WILL P ROLIPHIX'S LIABILITY WITH RESPECT

TO A PRODU CT, EXCEED THE PRICE PAID FOR SUCH PRODUCT.

This warranty statement supersedes all previous warranties.

This warranty extends to products purchased directly from Proliphix or an authorized Proliphix agent, dealer,

distributor, or reseller.

Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0 iii

Part No. 600-01004-000, Rev. 2

Material

Return

Procedure

No merchandise may be returned for credit, exchange, or service without prior authorization from Proliphix.

To obtain warranty service for Proliphix products, contact Proliphix Customer Service (1-866-475-4846) and

request a Return Material Authorization (RMA) number.

Products may be returned for credit, exchange, or service with a Proliphix RMA number and with proof of

purchase. Enclose a note explaining the symptoms of the problem , stating the RMA number, and the name,

address and phone number of the company or individual contact.

Authorized returns must be shipped prepaid to Proliphix at:

Proliphix, Inc.

66 Tadmuck Road

Suite #1

Westford, MA 01886

The RMA number must be clearly marked on the outside of the package. Products received without an RMA

number or without shipping prepaid will be subject to refusal by Proliphix. Proliphix reserves the right to

charge a 15% restocking fee plus shipping costs on any products returned without an RMA.

Return shipping charges following repair of items under warranty shall be paid by Proliphix via standard

ground carrier. In the event that repairs are found to be non-warranty, return shipping charges will be paid by

the purchaser.

FCC Model: NT10e/NT20e, NT100e/h, NT120e/h, NT130e/h, NT150e/h, NT160e/h, TM220e/h, and TM250e/h

EPA: EPA-20 and EPA-60

Made in the USA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CSA Power: 24 VAC 45mA 60Hz

48VDC 22mA 60Hz

Switched power each contact: 24VAC 2A 60Hz

Beta Draft Confidential

iv Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0

Part No. 600-01004-000, Rev. 2

Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0 1

Part No. 600-01004-000, Rev. 2

Beta Draft Confidential

Overview

The Proliphix EPA-20 and EPA-60 Installation Guide describes how to install the

Proliphix Ethernet Power Adapter 20 (EPA-20) and Ethernet Powe r Adapter 60

(EPA-60).

Before you Begin

Before you can install the EPA-20 and EPA-60, you must:

Determine a suitable location for the adapter, preferably near the Network switch

or router.

Verify a CAT5, CAT5E, or CAT6 cable is installed between the adapter and the

Proliphix thermostat.

Installing the EPA-20 and EPA-60

The following tools are required to install the EPA-20 and EPA-60:

#2 Phillips head screwdriver

110 punch down tool, included

Mounting and Wiring the EPA-20 and EPA-60

This section de scribes how to mount and wire the EPA-20 and EPA-60.

1Remove the adapter from packaging.

2Mount the adapter with 1” screws prov ided.

3Strip the end of the CAT5, CAT5E, or CAT6 cable sheathing approximately 1 ½”.

Caution

The EPA-20 and EPA-60 should only be powered with the Proliphix power supply

included with the EPA-20 and EPA-60. Do not power the EPA-20 or EPA-60 with

any other power supply.

Note

You can attach up to two Proliphix thermostats to a single EPA-20 adapter and up

to six Proliphix thermostats to a single EPA-60 adapter.

Note

If the adapter is being installed on wallboard then anchors may be necessary.

Beta Draft Confidential

2 Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0

Part No. 600-01004-000, Rev. 2

Mounting and Wiring the EPA-20 and EPA-60

4Untwist the wire pairs.

5Attach the other end of the CAT5, CAT5E, or CAT6 cable to the Proliphix thermostat.

Refer to Figure 1 to wire the EPA-20.

Refer to Figure 2 to wire the EPA-60.

Figure 1 EPA-20 Wiring

Caution

Do not strip individual wires.

Note

The 110 terminal and RJ-45 ports with the same number are part of the same

connection. The connection is from the thermostat backplate into the EPA then

continues from the RJ-45 to the network (router, switch, etc.).

Caution

You MUST use the T568A wiring scheme on the thermostat backplate when

connecting to the EPA. The EPA 110 block is wired as a T568A terminal, so both

ends of the same wire must use the same scheme.

Note

You must verify the appropriate wires are placed in the correct pin holes on the

adapters’s punch down terminal.

Ethernet

Power

Adapter

Model EPA-20

24 VDC

white-blue

white-orange

white-green

white-brown

blue

orange

green

brown

24VDC

Power Supply

CAT5

wire to

Proliphix

Device

CAT5 Cable to

Router or

Ethernet switch

110 Punch

down Terminal

CAT5 jack

Beta Draft Confidential Mounting and Wiring the EPA-20 and EPA-60

Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0 3

Part No. 600-01004-000, Rev. 2

Figure 2 EPA-60 Wiring

6Use a 110 punch down tool and punch each wire to one of the thermostat’s punch

down terminal pins. Refer to Figure 1 and Figure 2.

7Match the adapter ’s CAT5, CAT5E, or CAT6 Jack port(s) to the corresponding punch

down terminal port(s).

8Plug a CAT5, CAT5E, or CAT6 patch cable from the adapter ’s CAT5, CAT5E, or

CAT6 Jack port(s) to a router or Ethernet switch.

Ethernet

Power

Adapter

Model EPA-60

24 VDC

white-blue

white-orange

white-green

white-brown

blue

orange

green

brown

24VDC

Power Supply

CAT5

wire to

Proliphix

Device

CAT5 Cable to

Router or

Ethernet switch

110 Punch

down

Terminal

CAT5 jack

Note

The patch cable should be a straight through cable.

Caution

Do not apply power until the Proliphix thermostat is attached to the other end of

the CAT5, CAT5E, or CAT6 cable(s). Plug the 24VDC power supply into the

adapter which supplies power to the Proliphix thermostat attached to the adapter.

Beta Draft Confidential

4 Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0

Part No. 600-01004-000, Rev. 2

Mounting and Wiring the EPA-20 and EPA-60

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Proliphix Adapter Handbücher

Proliphix

Proliphix EPA-60 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung