5
EN – ENGLISH (Original instructions)
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new machine. This
manual has been prepared for the owner and operators of a PROMAC sander to promote safety
during installation, operation and maintenance procedures. Please read and understand the
information contained in these operating instructions and the accompanying documents. To obtain
maximum life and efficiency from your machine, and to use the machine safely, read this manual
thoroughly and follow instructions carefully.
…Table of Contents
1. Declaration of conformity
2. Warranty
3. Safety
Authorized use
General safety notes
Remaining hazards
4. Machine specifications Technical data
5. UNPACKING AND CHECKING LIST
6. 323BF-BP Exploded View
7. 323BF-BP Part List
1. Declaration of conformity
On our own responsibility we hereby declare that
this product complies with the regulations* listed
on page2.
Designed in consideration with the standards**.
2. Warranty
Tool France guarantees that the supplied
product is free from material defects and
manufacturing faults.
This warranty does not cover any defects which
are caused, either directly or indirectly, by
incorrect use, carelessness, accidental damage,
repair, inadequate maintenance or cleaning and
normal wear and tear.
Any warranty details (i.e. warranty period) can
be found in the General Terms and Conditions
(GTC) that are integral part of the contract.
These GTC can be viewed at the website of your
dealer or sent to you upon request.
Tool France reserves the right to make changes
to the product and accessories at any time.
3. Safety
3.1 Authorized use
This sander is designed for sander metal and a
similar sander only. Machining of other materials
is not permitted and may be carried out in
specific cases only after consulting with the
manufacturer.
The proper use also includes compliance with
the operating and maintenance instructions
given in this manual.
The machine must be operated only by person’s
familiar with its operation and maintenance and
who are familiar with its hazards.
The required minimum age must be observed.
The machine must only be used in a technically
perfect condition.
When working on the machine, all safety
mechanisms and covers must be mounted.
In addition to the safety requirements contained
in these operating instructions and your
country’s applicable regulations, you should
observe the generally recognized technical rules
concerning the operation of metalworking
machines.
Any other use exceeds authorization.
In the event of unauthorized use of the machine,
the manufacturer renounces all liability and the
responsibility is transferred exclusively to the
operator.
3.2 General safety notes
Metalworking machines can be dangerous if not
used properly. Therefore, the appropriate
general technical rules as well as the following
notes must be observed.
