Promate Solarmate-10 Bedienungsanleitung

solarMate-10

10000mAh

Heavy Duty SOLAR Powered Battery Pack

10000mAh

Heavy Duty SOLAR Powered Battery Pack

• solarMate-10

• Micro-USB Charging Cable

• User Guide

Introduction

Packaging Contents

Thank you for purchasing solarMate-10. Get power-on-the go when outdoors

with solarMate-10. This revolutionary new solar powered battery pack is built

keeping durability and functionality in mind. Charge two devices simultane-

ously even when you are not around any electrical output. With solarMate-10’s

Monocrystalline Silicon Solar Panel, charge your device under incandescent

light indoors. Never run out of battery on long ights, extended meetings or

those outdoor events. Charge two devices at a lightning speed with two fast

USB charging interface’s and get to know the power level with the LED

indicator. Utilize the best renewable energy source known to mankind at its

optimum level with solarMate-10.

English

Specication

• Battery Type: Li-polymer.

• Capacity: 10000mAh

• Input: Micro USB 5V/1.5A(Max),

• Solar Charging: 5V/200mA(Max),

• Output:USB1: 5V/1.3A(Max),

USB2: 5V/2.1A(Max)

• Charging Time: via Solar Power: 55-60 hrs

via USB: 7-8 hrs.

Features

• Powerful 10000mAh Capacity Li-polymer Battery.

• Charge two devices simultaneously.

• Monocrystalline Silicon Solar Panel

• Fast USB Charging Interface.

• Power on-the-go.

• Key Chain Design.

• Heat Dissipating ABS Plastic Shell

• LED battery level indicator.

• Intelligent Power Management with 7 Protection: Overvoltage protection,

Overcurrent protection, overcharge protection, short-circuit protection,

over power protection, over discharge protection. Temperature protection

• Compatible with all Smartphones and Tablets.

• LED Light.

English

Precautions

Please read all safety instructions and warnings thoroughly before using this

product. Improper use of this product may result in damage to this or

attached products.

1. Do not disassemble the back-up battery or attempt to x it.

2. Kindly use an original charging cable provided to charge the product.

3. Do not attempt to replace any part of this Back-up battery or battery

inside.

4. Do not crush, puncture, dispose of in re, short the contacts or expose the

battery to water or other liquids.

5. Do not connect input and output in reverse.

6. Do not store or use the battery in a high temperature environment,

including intense sunlight or heat.

7. Avoid drops, bumps, abrasions and impacts.

8. If there is any reason to believe that there is damage to the battery,

discontinue use immediately.

9.If you nd that the battery is too hot, is emitting an odor, or is deformed,

punctured or exhibits any suspicious or abnormal behavior, discontinue use

immediately and contact our customer service.

10. Always charge this product before extended storage.

English

Tap the Multi-Function button once to view the amount of power remaining in

solarMate-5

1. Checking the remaining power left in solarMate-10 back-up battery

Appearance & Interface Description:

1. Solar Panel

2. LED Indicators

3. Multi-function button.

4. USB Output

5. LED Light

6. USB Output

7. Micro USB Input

Operation Instructions:

English

Tap the Multi-Function button once to view the amount of power remaining in

solarMate-5

Plug the Micro-USB end of the charging cable provided into the Micro-USB

charging port in solarMate-10 back-up battery. Connect the other end of the

Micro-USB charging cable to a USB power adapter or computer USB port. The LED

battery level indicator light’s up indicating that the back-up battery is charging

normally.

solarMate-10, can be recharged by solar energy when kept under the sun rays or in

the environment with strong sunlight. solarMate-10 may also be charged using

incandescent light.

of power remaining %

No of LED’s Active

<=25% <=50% <=75% <=100%

1 2 3 4

2. Charging solarMate-10 back-up battery

English

3. Charging USB chargeable devices using solarMate-10

• Press and hold the Multi-function button for 3 seconds to turn ‘on’ the LED Light.

• Again press the Multi-function button for 3 seconds to turn ‘o’the LED Light.

4. Using the LED Light on solarMate-10

There are 2 ports available on solarMate-10. It is recommended to use the 1.3A

charging output port to charge smartphones and the 2.1A charging output port to

charge tablet devices. Plug the USB cable into the USB output port on solarMate-10

back-up battery and the other end into the device. Press the multi-function button

once to start charging your device. Detach the USB cable once charging is

complete.

English

Instrucciones de funcionamiento:

1. Vericar la carga restante en la batería de respaldo solarMate-10

2. Para cargar la batería de respaldo solarMate-10

Pulse el botón multifunción una vez para ver la cantidad de energía restante en

solarMate-10.

Conecte el extremo Micro USB del cable de recarga provisto en el puerto

Micro USB de la batería de respaldo solarMate-10. Conecte el otro extremo

del cable de recarga Micro USB en el puerto USB del cargador eléctrico o en

el puerto USB del ordenador. El indicador LED de nivel de batería se

encenderá indicando que la batería de respaldo está cargando

correctamente.

La batería SolarMate-10, puede ser cargada con energía solar siempre que se

mantenga una exposición directa a los rayos del sol o en un entorno

fuertemente iluminado por los rayos del sol. SolarMate-10 puede también

ser cargada mediante luz incandescente.

No of LED’s Active

<=25% <=50% <=75% <=100%

1 2 3 4

% de la energía

restante

Use the image on the operation page but add more devices and dierent cables)

There are 2 ports available on solarMate-10. It is recommended to use the 1.3A

charging output port to charge smartphones and the 2.1A charging output port to

charge tablet devices. Plug the USB cable into the USB output port on solarMate-10

back-up battery and the other end into the device. Press the multi-function button

once to start charging your device. Detach the USB cable once charging is

complete.

Spanish

Existen 2 puertos disponibles en solarMate-10. Se recomienda utilizar el puerto de

carga de salida 1.3A para recargar smartphones y el puerto de salida 2.1A para

recargar las tabletas. Conecte el cable USB en el puerto de salida USB de la batería

de respaldo solarMate-10 y el otro extremo en el dispositivo. Presione una vez el

botón multifunción para comenzar la carga de su dispositivo. Desconecte el cable

USB una vez que la carga ha sido terminada.

3. Para Cargar dispositivos alimentados por USB utilizando solarMate-10

• Para encender la luz LED, presione y mantenga el botón multifunción

durante 3 segundos.

• Para apagar la luz LED, presione de nuevo el botón multifunción durante

3 segundos.

4. Para utilizar la luz de LED de la batería de respaldo solarMate-10

Spanish

de batterie restante %

Nbre de LED actives

<=25% <=50% <=75% <=100%

1 2 3 4

Appuyez une fois sur le bouton multifonction an d’acher la quantité de batterie

restante du solarMate-10.

Branchez l'extrémité Micro-USB du câble de chargement fourni dans le port

Micro-USB de chargement de la batterie de secours solarMate-10. Connectez l'autre

extrémité du câble de chargement Micro-USB au port USB de l'adaptateur secteur

ou au port USB de l’ordinateur. L’indicateur de niveau de batterie LED indique que la

batterie back-up se charge normalement.

solarMate-10, peut être rechargé grâce à l'énergie solaire lorsqu’il est placé sous les

rayons du soleil ou dans un environnement présentant un fort ensoleillement.

solarMate-10 peut également être rechargé en utilisant la lumière incandescente.

Mode d’emploi:

1. Vérication de la batterie de secours restante du solarMate-10

2. Chargement de la batterie de secours solarMate-10

French

Andere Promate Batteriepack Handbücher

Promate

Promate solarMate-2 Bedienungsanleitung

Promate

Promate powerCase-S5 Bedienungsanleitung

Promate

Promate Premium Sporty Back-up Battery Case for iPhone... Bedienungsanleitung

Promate

Promate triForza Bedienungsanleitung

Promate

Promate Storm.IO Bedienungsanleitung

Promate

Promate pocketMate LT Bedienungsanleitung

Beliebte Batteriepack Handbücher anderer Marken

Acumentrics

Acumentrics PACK-POWER SYSTEM Bedienungsanleitung

ACDC Dynamics

ACDC Dynamics SPF12-50 Bedienungsanleitung

Aegis

Aegis ABL-72020P Bedienungsanleitung

Dyness

Dyness TowerESS Bedienungsanleitung

Growatt

Growatt APX 5.0P-S0-US Bedienungsanleitung

EGO

EGO BAX1300 Bedienungsanleitung

CyberPower

CyberPower BCA Series Bedienungsanleitung

Intermec

Intermec 700 Series Bedienungsanleitung

Dometic

Dometic PLB40 Bedienungsanleitung

V-TAC

V-TAC VT-48280-W2 Bedienungsanleitung

Valence

Valence RT Bedienungsanleitung

Nikon

Nikon MB-D14 Bedienungsanleitung

IOGear

IOGear GBP24V Series Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD Bedienungsanleitung

Clas Ohlson

Clas Ohlson PW-290A Bedienungsanleitung

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Bedienungsanleitung

Samsung

Samsung EB-U3300 Bedienungsanleitung

ECTIVE

ECTIVE LC Series Bedienungsanleitung

Promate solarmate-10 Bedienungsanleitung

Beliebte Batteriepack Handbücher anderer Marken