Promise VTrak S3000 Bedienungsanleitung

VTRAK S3000

Quick Start Guide

Version 1.0

VTrak S3000 Quick Start Guide

VTrak S3000 Task List

• Task 1: Unpacking the Boxes (below)

• Task 2: Mounting the Appliance in a Rack (page 4)

• Task 3: Configuring the VTrak Appliance (page 8)

• Task 4: Mounting the Subsystem in a Rack (page 23)

• Task 5: Installing Disk Drives in the Subsystem (page 26)

• Task 6: Making Data Connections (page 28)

• Task 7: Making Management Connections (page 34)

• Task 8: Setting-up Serial Cable Connections (page 37)

• Task 9: Powering-on the Subsystem (page 38)

• Task 10: Setting-up the Subsystem (page 40)

• Task 11: Configuring Storage on the Subsystem (page 46)

• Task 12: Setting-up Basic Storage (page 54)

• Task 13: Setting-up High Availability (page 62)

• Contacting Technical Support (page 68)

Thank you for your purchase of the VTrak S3000 storage solution. This Quick

Start Guide is designed to help you unpack, install, connect, configure, and run

your VTrak S3000 system.

If you are adding VTrak RAID subsystems or JBOD enclosures to your VTrak

S3000 system, follow the Task List in this document. The Task Lists in other

Quick Start Guides do not cover VTrak S3000.

For complete information about your VTrak S3000 appliance, see the VTrak

S3000 User Manual on the software DVD.

Please see the software DVD for a complete set of user documents.

Task 1: Unpacking the Box

The VTrak S3000 appliance box contains the following items:

• VTrak appliance

• Bezel

• Left and right mounting rails for the appliance

• 1.5 m (4.9 ft) Power cords, 2 each

• Accessory box

• Printed software license key

• DVD with software install files and user documentation

Task 1: Unpacking the Box

Warning

The electronic components within the VTrak appliances and

subsystems are sensitive to damage from Electro-Static

Discharge (ESD). Observe appropriate precautions at all times

when handling the VTrak or its subassemblies.

Important

To run the PROMISE Management Console, your PC must have

the latest version of Java Runtime Environment (JRE).

VTrak S3000 Quick Start Guide

Task 2: Mounting the Appliance in a Rack

Identifying the Sections of the Rack Rails

The chassis package includes two rack rail assemblies in the rack mounting kit.

Each assembly consists of two sections:

• A pair of two-piece chassis rails that attach to the chassis

• A pair of two-piece rack rails that attach to the rack

Figure 1. Appliance rack mount components

Inner Chassis Rails

The chassis rails come in two sections:

• Chassis rails – Attached to the chassis at the factory

• Chassis rail extensions – You attach them to the chassis rails

Installing the Chassis Rail Extensions

1. Place the chassis rail extensions on the side of the chassis aligning the

hooks on the chassis with the holes on the rail extensions.

The inner rail extension faces “outward” the same as the inner rail.

2. Slide the rail extension toward the front of the chassis.

3. Secure the chassis with two attaching screws as shown in the diagram.

Use the screws supplied with the rack mount kit. See page 5, Figure 2.

4. Repeat steps 1 through 3 for the other chassis rail extension.

Rack rails

Chassis rails

(both sides)

Chassis rail

extensions

Rack rail extensions

Task 2: Mounting the Appliance in a Rack

Figure 2. Assembling the chassis rails

Installing the Rack Rails into the Rack

1. Attach the longer section of the rack rail to the shorter section of the rack rail.

Align the pins with the slides. Both brackets of the rack rail must face the

same direction in order to secure to the rack.

2. Adjust the length of the two sections of the rack rail so that they fit snugly in

the rack. See Figure 3.

•Thelonger section of the rack rail attaches to the front rack post.

•Theshorter section of the rack rail attaches to the rear rack post

Figure 3. Assembling the rack rails

3. Secure the rail brackets to the rack posts.

Use the M5 screws included with the rackmount kit. See page 6, Figure 4.

Inner rail

Attaching

screw

Attaching

screw

Inner rail extension

Aligning hooks

Rear bracket

Front bracket Attaching points

VTrak S3000 Quick Start Guide

4. Repeat steps 1 through 3 for the remaining rack rail.

Figure 4. Installing the rack rails

5. Pick up the appliance and line-up the chassis rails on the rear of the

appliance with the front rack rails.

See page 7, Figure 5.

6. Slide the appliance into the rack.

If needed, press the locking tabs on the chassis rail to slide the appliance

into position.

When you have pushed the appliance all the way into the rack, the locking

tabs make a “click” sound.

Rack front post

Rack rear post

M5 attaching screws

Task 2: Mounting the Appliance in a Rack

Figure 5. Appliance rack mount assembly diagram

Rack rails

Locking tab

(both sides)

Chassis rails

VTrak S3000 Quick Start Guide

Task 3: Configuring the VTrak Appliance

VTrak appliance configuration is done through the PROMISE Management

Console over a network connection. This process takes about 15 minutes.

When you add the VTrak appliance to your network, be sure the Host PC, where

you plan to run the Management Console, can connect with the VTrak appliance

over the network.

Before you begin configuration, obtain four dedicated IP addresses from your

Network Administrator:

• Ethernet port 0 (eth0)

•IPMILAN

• Heartbeat

• Health Monitor

Making Power and Network Connections

To make power and network connections on the appliance:

1. Plug the power cords into power supplies.

2. Attach at least one active LAN cable to one of the network ports.

3. Attach an active LAN cable to the IPMI port.

See Figure 6 for an example.

Figure 6. VTrak appliance setup connections

Accessing the Power Button

To access the power button and boot the VTrak appliance:

1. Unlock the bezel.

2. Push the bezel release tab to the left to release the bezel. See Figure 7.

3. Remove the bezel and set it aside.

4. Press the power button to boot the VTrak appliance.

See Figure 8.

2 4 8

TX RXTX RX

8 4 2

2 4 8

TX RXTX RX

8 4 2

IPMI LAN port

1 Gb/s Heartbeat port

Power supplies

1 Gb/s Management port

Task 3: Configuring the VTrak Appliance

Figure 7. Removing the bezel from the VTrak appliance

Figure 8. VTrak appliance power and reset buttons

As the appliance boots, the GRUB screen shows a choice of kernels.

5. Choose Promise VTrak S3000 2.6.18-128.el5.

6. When the login appears, type root for the user name and password1 for the

password.

Logging into the Management Console

The PROMISE Management Console is your interface with the software running

on the VTrak appliance. To run the Management Console, your PC must have the

latest version of JRE installed. You make the initial connection to the

Management Console through your network browser.

To log into the Management Console:

1. Launch your network browser.

2. In the browser’s address field, type http://192.168.253.10 and press Enter.

Bezel release tabBezel lock

Power buttonReset button

VTrak appliance IP address

VTrak S3000 Quick Start Guide

The Opening launch.jnlp dialog box appears.

3. In the Opening launch.jnlp dialog box, choose the Open with option, choose

Java Web Start Launcher from the dropdown menu, and click the OK

button.

JRE launches on your PC.

If a Warning – Security dialog box appears, click the Run button to continue.

The Management Console splash screen appears.

The first time you log into the Management Console, the End User License

Agreement appears.

Inhaltsverzeichnis

Andere Promise Lagerung Handbücher

Promise

Promise VessJBOD 1730 Bedienungsanleitung

Promise

Promise SMARTSTOR NS4300N Bedienungsanleitung

Promise

Promise Vess A Series Bedienungsanleitung

Promise

Promise Vess A6600P Bedienungsanleitung

Promise

Promise Smartstor NS4600 Bedienungsanleitung

Promise

Promise Pegasus 2 R4 Bedienungsanleitung

Promise

Promise PEGASUS 2 R2+ Bedienungsanleitung

Promise

Promise Pegasus3 R4 Bedienungsanleitung

Promise

Promise Smartstor NS4600 Bedienungsanleitung

Promise

Promise Vess A8020 Bedienungsanleitung

Promise

Promise Pegasus J2 Bedienungsanleitung

Promise

Promise Pegasus R6 Bedienungsanleitung

Promise

Promise Vess A7000 Series Bedienungsanleitung

Promise

Promise VTrak M500f Bedienungsanleitung

Promise

Promise Pegasus32 R6 Bedienungsanleitung

Promise

Promise Vess A6600 Bedienungsanleitung

Promise

Promise FileCruiser VA2600 Handbuch

Promise

Promise VTrak N1008 Bedienungsanleitung

Promise

Promise Pegasus M4 Bedienungsanleitung

Promise

Promise Vess A3120 Bedienungsanleitung

Promise

Promise SmartStor DS4600 Bedienungsanleitung

Promise

Promise E610f Bedienungsanleitung

Promise

Promise Vess A2600 Bedienungsanleitung

Promise

Promise VessJBOD 1000 Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung