9109829 9 cu. ft 212cc Cement Mixer V1.0
8 For technical questions call 1-800-665-8685
5. If abnormal noise occurs during operation, power down immediately
and inspect and repair, as needed.
6. Only use accessories intended for use with this tool.
7. Retighten the V-belt after the first 24 hours of use. The V-belt should
be pressed in no more than 1/4 in.
8. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair
the tool. An improperly repaired tool may present a
hazard to the user and/or others.
This cement mixer must be cleaned after each use.
Use a gravel and water mixture to scour the drum for approximately 2 full
minutes. Discharge cleaning mixture immediately upon completion.
If cement dries in the drum, scrape out thoroughly. Do not use shovels or
other tools as this may damage the drum.
Inspect and lubricate the tool when required. Only use light oil to lubricate
the tool. Other lubricants may not be suitable and could damage the tool
or cause a malfunction during use.
When not in use for an extended period, apply a thin coat of lubricant to
the steel parts to avoid rust. Remove the lubricant before using the tool
again.
NOTICE! NEVER use a penetrating oil to lubricate the
tool. Penetrating oil may act as a solvent that can
break down the grease and cause the tool to seize up.
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing
uncontrolled discharge of waste oil or other mixtures.
