ProSoft Technology MVI71-GEC Bedienungsanleitung

MVI71-GEC

PLC 5 Platform

Generic ASCII Ethernet

Communication Module

May 11, 2011

USER MANUAL

Your Feedback Please

We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,

compliments or complaints about our products, documentation, or support, please write or call us.

How to Contact Us

ProSoft Technology

5201 Truxtun Ave., 3rd Floor

Bakersfield, CA 93309

+1 (661) 716-5100

+1 (661) 716-5101 (Fax)

www.prosoft-technology.com

support@prosoft-technology.com

MVI71-GEC User Manual

May 11, 2011

ProSoft Technology

, ProLinx

, inRAx

, ProTalk

, and RadioLinx

are Registered Trademarks of ProSoft

Technology, Inc. All other brand or product names are or may be trademarks of, and are used to identify products

and services of, their respective owners.

ProSoft Technology

Product Documentation

In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments.

User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided on the enclosed CD-ROM in

Adobe

Acrobat Reader file format (.PDFs). These product documentation files may also be freely downloaded from

our web site: www.prosoft-technology.com

Important Installation Instructions

Power, Input, and Output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article 501-4 (b)

of the National Electrical Code, NFPA 70 for installation in the U.S., or as specified in Section 18-1J2 of the Canadian

Electrical Code for installations in Canada, and in accordance with the authority having jurisdiction. The following

warnings must be heeded:

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS

I, DIV. 2;

WARNING - EXPLOSION HAZARD - HEN IN HAZARDOUS LOCATIONS, TURN OFF PO ER BEFORE

REPLACING OR IRING MODULES

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS PO ER HAS BEEN

S ITCHED OFF OR THE AREA IS KNO N TO BE NON-HAZARDOUS.

THIS DEVICE SHALL BE PO ERED BY CLASS 2 OUTPUTS ONLY.

MVI (Multi Vendor Interface) Modules

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN

SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.

AVERTISSEMENT - RISQUE D'EXPLOSION - AVANT DE DÉCONNECTER L'ÉQUIPEMENT, COUPER LE

COURANT OU S'ASSURER QUE L'EMPLACEMENT EST DÉSIGNÉ NON DANGEREUX.

Warnings

North America Warnings

A Warning - Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2.

B Warning - Explosion Hazard - When in Hazardous Locations, turn off power before replacing or rewiring

modules.

Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is

known to be nonhazardous.

C Suitable for use in Class I, division 2 Groups A, B, C and D Hazardous Locations or Non-Hazardous Locations.

ATEX Warnings and Conditions of Safe Usage:

Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction

A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring modules.

B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is

known to be non-hazardous.

C These products are intended to be mounted in an IP54 enclosure. The devices shall provide external means to

prevent the rated voltage being exceeded by transient disturbances of more than 40%. This device must be used

only with ATEX certified backplanes.

D DO NOT OPEN WHEN ENERGIZED.

Warning: This module is not hot-s appable! Always remove power from the rack before inserting or removing this

module, or damage may result to the module, the processor, or other connected devices.

Battery Life Advisory

The MVI46, MVI56, MVI56E, MVI69, and MVI71 modules use a rechargeable Lithium Vanadium Pentoxide battery to

backup the real-time clock and CMOS. The battery should last for the life of the module. The module must be

powered for approximately twenty hours before the battery becomes fully charged. After it is fully charged, the battery

provides backup power for the CMOS setup and the real-time clock for approximately 21 days. When the battery is

fully discharged, the module will revert to the default BIOS and clock settings.

Note: The battery is not user replaceable.

Markings

Electrical Ratings

Backplane Current Load: 800 mA @ 5 Vdc

Operating Temperature: 0°C to 60°C (32°F to 140°F)

Storage Temperature: -40°C to 85°C (-40°F to 185°F)

Shock: 30 g operational, 50 g non-operational; Vibration: 5 g from 10 Hz to 150 Hz

Relative Humidity 5% to 95% (with no condensation)

All phase conductor sizes must be at least 1.3 mm(squared) and all earth ground conductors must be at least

4mm(squared).

Label Markings

Agency Approvals and Certifications

Agency Applicable Standards

ANSI / ISA ISA 12.12.01 Class I Division 2, GPs A, B, C, D

CSA/cUL C22.2 No. 213-1987

CSA CB Certified IEC61010

ATEX EN60079-0 Category 3, Zone 2

EN60079-15

243333

MVI71-GEC ♦ PLC 5 Platform Contents

Generic ASCII Ethernet Communication Module User Manual

ProSoft Technology, Inc. Page 5 of 86

May 11, 2011

Contents

Your Feedback Please........................................................................................................................2

How to Contact Us ..............................................................................................................................2

ProSoft Technology

Product Documentation....................................................................................2

Important Installation Instructions .......................................................................................................3

MVI (Multi Vendor Interface) Modules ................................................................................................3

Warnings.............................................................................................................................................3

Battery Life Advisory ...........................................................................................................................3

Markings..............................................................................................................................................4

Guide to the MVI71-GEC User Manual 7

1 Start Here 9

1.1

System Requirements.............................................................................................10

1.2

Package Contents ...................................................................................................11

1.3

Setting Jumpers ......................................................................................................12

1.4

Install the Module in the Rack .................................................................................13

1.5

Connect your PC to the Processor..........................................................................15

1.6

Download the Sample Program to the Processor...................................................16

1.6.1

Configuring the RSLinx Driver for the PC COM Port ..............................................17

1.7

Connect your PC to the Module ..............................................................................19

2 Module Configuration 21

2.1

Using ProSoft Configuration Builder .......................................................................22

2.1.1

Set Up the Project ...................................................................................................22

2.1.2

Renaming PCB Objects ..........................................................................................24

2.1.3

[Module]...................................................................................................................25

2.1.4

[Server x] .................................................................................................................25

2.1.5

Downloading the Project to the Module Using a Serial COM Port..........................27

2.2

IP Address...............................................................................................................28

3 Ladder Logic 29

3.1

Adding the Module to an Existing PLC5 Project .....................................................30

3.2

GECServerStat (Server Status Object)...................................................................32

4 Diagnostics and Troubleshooting 33

4.1

LED Status Indicators..............................................................................................34

4.1.1

Ethernet LED Indicators ..........................................................................................34

4.1.2

Clearing a Fault Condition.......................................................................................35

4.1.3

Troubleshooting.......................................................................................................35

4.2

Using ProSoft Configuration Builder (PCB) for Diagnostics....................................36

4.2.1

Using the Diagnostic Window in ProSoft Configuration Builder..............................36

4.2.2

Navigation ...............................................................................................................38

4.2.3

Main Menu...............................................................................................................39

Contents MVI71-GEC ♦ PLC 5 Platform

User Manual Generic ASCII Ethernet Communication Module

Page 6 of 86 ProSoft Technology, Inc.

May 11, 2011

4.2.4

Network Menu......................................................................................................... 42

4.3

Reading Status Data from the Module ................................................................... 43

5 Reference 45

5.1

Product Specifications ............................................................................................ 46

5.1.1

General Specifications............................................................................................ 46

5.1.2

Hardware Specifications ......................................................................................... 46

5.1.3

Functional Specifications ........................................................................................ 47

5.2

Functional Overview ............................................................................................... 48

5.2.1

General Concepts................................................................................................... 48

5.3

Cable Connections ................................................................................................. 66

5.3.1

Ethernet Connection ............................................................................................... 66

5.3.2

RS-232 Configuration/Debug Port.......................................................................... 67

5.3.3

DB9 to RJ45 Adaptor (Cable 14) ............................................................................ 69

5.4

MVI71-GEC Status Data Area ................................................................................ 70

5.5

MVI71-GEC Configuration Data ............................................................................. 74

5.5.1

MVI71-GEC Server Communication Module Configuration ................................... 74

6 Support, Service & Warranty 77

Contacting Technical Support .......................................................................................................... 77

6.1

Return Material Authorization (RMA) Policies and Conditions ............................... 79

6.1.1

Returning Any Product............................................................................................ 79

6.1.2

Returning Units Under Warranty............................................................................. 80

6.1.3

Returning Units Out of Warranty............................................................................. 80

6.2

LIMITED WARRANTY ............................................................................................ 81

6.2.1

What Is Covered By This Warranty ........................................................................ 81

6.2.2

What Is Not Covered By This Warranty.................................................................. 82

6.2.3

Disclaimer Regarding High Risk Activities.............................................................. 82

6.2.4

Intellectual Property Indemnity ............................................................................... 83

6.2.5

Disclaimer of all Other Warranties.......................................................................... 83

6.2.6

Limitation of Remedies ** ....................................................................................... 84

6.2.7

Time Limit for Bringing Suit..................................................................................... 84

6.2.8

No Other Warranties............................................................................................... 84

6.2.9

Allocation of Risks .................................................................................................. 84

6.2.10

Controlling Law and Severability ............................................................................ 84

Index 85

MVI71-GEC ♦ PLC 5 Platform Guide to the MVI71-GEC User Manual

Generic ASCII Ethernet Communication Module User Manual

ProSoft Technology, Inc. Page 7 of 86

May 11, 2011

Guide to the MVI71-GEC User Manual

Function Section to Read Details

Introduction

(Must Do)

→ Start Here (page 8) This section introduces the customer to the

module. Included are: package contents,

system requirements, hardware installation, and

basic configuration.

Diagnostic and

Troubleshooting

→ Diagnostics and

Troubleshooting

(page 33)

This section describes Diagnostic and

Troubleshooting procedures.

Reference

Product Specifications

→ Reference (page 45)

Product

Specifications (page

46)

These sections contain general references

associated with this product and its

Specifications..

Support, Service, and

Warranty

Index

→ Support, Service

and Warranty (page

77)

Index

This section contains Support, Service and

Warranty information.

Index of chapters.

Guide to the MVI71-GEC User Manual MVI71-GEC ♦ PLC 5 Platform

User Manual Generic ASCII Ethernet Communication Module

Page 8 of 86 ProSoft Technology, Inc.

May 11, 2011

MVI71-GEC ♦ PLC 5 Platform Start Here

Generic ASCII Ethernet Communication Module User Manual

ProSoft Technology, Inc. Page 9 of 86

May 11, 2011

1 Start Here

In This Chapter

System Requirements ...........................................................................10

Package Contents.................................................................................11

Setting Jumpers ....................................................................................12

Install the Module in the Rack ...............................................................13

Connect your PC to the Processor ........................................................15

Download the Sample Program to the Processor..................................16

Connect your PC to the Module ............................................................19

To get the most benefit from this User Manual, you should have the following

skills:

Rockwell Automation

RSLogix™ software: launch the program, configure

ladder logic, and transfer the ladder logic to the processor

Microsoft Windows: install and launch programs, execute menu commands,

navigate dialog boxes, and enter data

Hardware installation and wiring: install the module, and safely connect

GEC and PLC devices to a power source and to the MVI71-GEC module’s

application port(s)

Start Here MVI71-GEC ♦ PLC 5 Platform

User Manual Generic ASCII Ethernet Communication Module

Page 10 of 86 ProSoft Technology, Inc.

May 11, 2011

1.1 System Requirements

The MVI71-GEC module requires the following minimum hardware and software

components:

Rockwell Automation PLC processor, with compatible power supply and one

free slot in the rack, for the MVI71-GEC module. The module requires 800mA

of available power.

The PLC Processor must provide for at least 64 words of BTR/BTW area,

otherwise the module may not function correctly.

Rockwell Automation RSLogix 5 programming software.

Rockwell Automation RSLinx communication software

Pentium

100 MHz minimum. Pentium III 700 MHz (or better) recommended

Supported operating systems:

Microsoft Windows XP

Microsoft Windows 2000

Microsoft Windows NT v4.0 with Service Pack 3 or greater

Microsoft Windows ME

Microsoft Windows 98

64 Mbytes of RAM minimum, 256 Mbytes of RAM recommended

100 Mbytes of free hard disk space (or more based on application

requirements)

256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color

1024 ×768 recommended)

CD-ROM drive

Inhaltsverzeichnis

Andere ProSoft Technology Steuereinheit Handbücher

ProSoft Technology

ProSoft Technology inRAx MVI56-HART Bedienungsanleitung

ProSoft Technology

ProSoft Technology PS69-DPM Bedienungsanleitung

ProSoft Technology

ProSoft Technology ILX69-PBM Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRax MVI56E-GSC Bedienungsanleitung

ProSoft Technology

ProSoft Technology MVI56E-SIE Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X-MOD Bedienungsanleitung

ProSoft Technology

ProSoft Technology MVI56E-MCM Bedienungsanleitung

ProSoft Technology

ProSoft Technology MVI69L-MBTCP Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRAx MVI56-GEC Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRAx MVI46-PDPMV1 Bedienungsanleitung

ProSoft Technology

ProSoft Technology ProLinx ASCII Versionshinweis

ProSoft Technology

ProSoft Technology inRax MVI71-BDW Bedienungsanleitung

ProSoft Technology

ProSoft Technology ILX800-SMSG Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRAx MVI56-CAS Bedienungsanleitung

ProSoft Technology

ProSoft Technology InRAX MVI46-PDPS Bedienungsanleitung

ProSoft Technology

ProSoft Technology ControlLogix inRAx MVI56E-MNETR Bedienungsanleitung

ProSoft Technology

ProSoft Technology MVI69E-GSC Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRAx MVI56-S3964R Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRAx MVI46-DFNT Bedienungsanleitung

ProSoft Technology

ProSoft Technology ILX69-PBS Bedienungsanleitung

ProSoft Technology

ProSoft Technology PLX51-HART-4O Bedienungsanleitung

ProSoft Technology

ProSoft Technology inRAX MVI69-S3964R Bedienungsanleitung

ProSoft Technology

ProSoft Technology MVI56E-61850S Bedienungsanleitung

ProSoft Technology

ProSoft Technology ProTalk PTQ-104C Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung