Protech SG-S151 Bedienungsanleitung

USER

MANUAL

SG-S151 / SG-S171 / SG-S211 M2

SG-S151 / SG-S171 /

SG-S211

15” / 17” / 21.5” Intel®Celeron®J3455 /

Atomx7-E3950 Processor

Fanless and All-around IP66/IP69K

Stainless Panel PC

SG-S15

1/SG-S171 /SG-S211

15”/17”/21.5”Intel®Celeron®J3455 /

Atom®x7-E3950 Processor

Fanless and All-around IP66/IP69K

Stainless Panel PC

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in Feb. 2020. You may not reproduce or

transmit in any form or by any means, electronic, or mechanical,

including photocopying and recording.

DISCLAIMER

This user’smanual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required totake

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery

is incorrectly replaced. Replace the battery

only with the

same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

CAUTION: The waterproof capability of the device may be

incapable when the screws are loosened.

CAUTION: The O-ring to seal the device may be damaged

during the maintenance process. Qualified engineer is

recommended to make the O-ring replacement to keep the

waterproof capability of the device.

WARNING: Some internal parts of the system may have

high electrical voltage. We strongly recommend that only

qualified engineers are allowed to service and disassemble

the system. If any damages should occur on the system and

are caused by unauthorized servicing, it will not be covered

by the product warranty.

Contents

Revision History ............................................................................................. v

1Introduction ......................................................................................... 1-1

1.1 About This Manual .................................................................... 1-2

2Getting Started .................................................................................... 2-1

2.1 Package List.............................................................................. 2-2

2.2 System Overview ...................................................................... 2-3

2.3 SG-S151 System Specifications ............................................... 2-9

2.4 SG-S171 System Specifications ............................................. 2-11

2.5 SG-S211 System Specifications ............................................. 2-13

2.6 Safety Precautions .................................................................. 2-15

3System Configuration......................................................................... 3-1

3.1 External I/O Ports Diagram ....................................................... 3-2

3.1.1 Rear I/O Ports Diagram ..................................................... 3-2

3.2 Jumper & Connector Quick Reference Table............................ 3-3

3.3 Component Locations Of System Main Board.......................... 3-4

3.3.1 Top View of System Main Board ....................................... 3-4

3.3.2 Bottom View of System Main Board.................................. 3-6

3.4 How To Set Jumpers ................................................................. 3-7

3.5 Setting Main Board Connectors and Jumpers .......................... 3-9

3.5.1 COM3 and COM4 PIN9 Definition Selection Guide .......... 3-9

3.5.2 COM Connectors (COM1, COM2) .................................. 3-10

3.5.3 LAN1, LAN2 Ports (LAN1, LAN2).................................... 3-11

3.5.4 Dual USB 3.0 Connectors (USB1) .................................. 3-13

3.5.5 USB 3.0 Connectors (USB2)........................................... 3-13

3.5.6 USB 2.0 Connector (USB3).............................................3-14

3.5.7 Programmable GPIO Pin Header (JDIO1) ......................3-14

3.5.8 I2C Wafer (JI2C1)............................................................ 3-15

3.5.9 MCU FW Rewrite Connector (JMCU1) ........................... 3-15

3.5.10 DC Power Input Connector (PWR2)................................ 3-15

3.5.11 Sysetm Fan Connector (FAN1) ....................................... 3-16

3.5.12 MINI PCI Express Slot (M_PCIE1)..................................3-17

3.5.13 LVDS Connector (LVDS1) ............................................... 3-18

3.5.14 Slide Switch For LVDS Resolution Selection (SW1) ....... 3-19

3.5.15 Front Panel Connector (JFP1) ........................................3-22

3.5.16 HD Audio Connector (AUDIO1).......................................3-22

3.5.17 Panel Inverter Connector (JINV1) ...................................3-23

3.5.18 Serial ATA (SATA) 3.0 Connector (SATA1)...................... 3-23

3.5.19 SATA Power Connector (SATA_PWR1) ..........................3-23

3.5.20 BIOS Reset Connector (JP9) ..........................................3-24

3.5.21 LVDS Backlight Control Selection (JP7)..........................3-24

3.5.22 LVDS VCC Voltage Selection (JP_VDD1)....................... 3-25

3.5.23 Clear CMOS Data Selection (JP4) ..................................3-26

3.6 External M12 Waterproof Connectors..................................... 3-27

3.6.1 USB 2.0 Connectors........................................................ 3-27

3.6.2 Power Button ................................................................... 3-27

3.6.3 LAN1, LAN2 Ports ........................................................... 3-28

3.6.4 COM Connector............................................................... 3-29

3.6.5 DC Power Input Connector ............................................. 3-29

4Software Utilities................................................................................. 4-1

4.1 Introduction................................................................................ 4-2

4.2 Installing Intel®Chipset Software Installation Utility.................. 4-3

4.3 Installing Intel®Trusted Execution Engine Installation Utility .... 4-4

iii

4.4 Installing Microsoft Hotfix kb3211320 and kb3213986 Driver... 4-5

4.5 Installing Graphics Driver Utility ................................................ 4-6

4.6 Installing LAN Driver Utility........................................................ 4-7

4.7 Installing Sound Driver Utility .................................................... 4-8

4.8 Installing Intel®Serial I/O Driver Utility ...................................... 4-9

5BIOS SETUP ........................................................................................ 5-1

5.1 Introduction................................................................................ 5-2

5.2 Accessing Setup Utility.............................................................. 5-4

5.3 Main........................................................................................... 5-7

5.4 Advanced .................................................................................. 5-9

5.4.1 Advanced - ACPI Settings ............................................... 5-10

5.4.2 Advanced – Onboard Device Configuration .................... 5-11

5.4.3 Advanced – Hardware Monitor........................................ 5-12

5.4.4 Advanced – F81964 Watchdog Configuration.................5-13

5.4.5 Advanced – S5 RTC Wake Settings................................ 5-14

5.4.5.1 S5 RTC Wake Settings [Fixed Time]............................... 5-15

5.4.5.2 S5 RTC Wake Settings [Dynamic Time].......................... 5-16

5.4.6 Advanced – CPU Configuration ...................................... 5-17

5.4.6.1 Socket 0 CPU Information...............................................5-18

5.4.6.2 CPU Power Management Configuration .........................5-19

5.4.7 Advanced – F81964 Super IO Configuration .................. 5-20

5.4.8 Advanced – USB Configuration....................................... 5-22

5.4.9 Chipset ............................................................................ 5-23

5.4.9.1 Chipset – North Bridge ....................................................5-24

5.4.9.2 Chipset – South Bridge ................................................... 5-25

5.4.9.3 Chipset – South Bridge – PCI Express Configuration..... 5-26

5.4.9.4 Chipset – South Bridge – SATA Drives ...........................5-30

5.4.9.5 Chipset – South Bridge – Miscellaneous Configuration ..5-31

5.5 Security ................................................................................... 5-32

5.6 Boot ......................................................................................... 5-34

5.7 Save & Exit.............................................................................. 5-36

Appendix A System Diagrams....................................................A-1

SG-S151 System Exploded Diagram .......................................................A-2

SG-S171 System Exploded Diagram .......................................................A-4

SG-S211 System Exploded Diagram .......................................................A-6

VESA Mount Installation Exploded Diagram ............................................A-8

Stand Kit Installation Exploded Diagram ..................................................A-9

SG-S151 Packing Exploded Diagram ....................................................A-10

SG-S171 Packing Exploded Diagram ....................................................A-11

SG-S211 Packing Exploded Diagram.....................................................A-12

Appendix B Technical Summary ................................................B-1

BE-0986 Block Diagram ...........................................................................B-2

Interrupt Map ............................................................................................B-3

I/O MAP ..................................................................................................B-16

Memory Map...........................................................................................B-18

Configuring WatchDog Timer .................................................................B-20

Flash BIOS Update.................................................................................B-22

Revision History

The revision history of SG-S151/SG-S171/SG-S211 User Manual is described

below:

Version No.

Revision History

Date

M2 Added user manual information for

SG-S171 and SG-S211.

2020/02/04

Initial Release

2019/07/01

SG-S151/SG-S171/SG-S211 USER MANUAL

Page: 1-1

1 Introduction

This chapter provides the introduction for SG-S151 /

SG-S171 / SG-S211 system as well as the framework of the

user manual.

The following topic is included:

•About This Manual

Chapter 1 Introduction

SG-S151/SG-S171/SG-S211 USER MANUAL

Page: 1-2

1.1 About This Manual

Thank you for purchasing our SG-S151 / SG-S171 / SG-S211 system. The SG-S151 /

SG-S171 / SG-S211 is an updated system designed to be comparable with the highest

performance of IBM AT personal computers. The SG-S151 / SG-S171 / SG-S211

provides faster processing speed, greater expandability and can handle more tasks

than before. This manual is designed to assist you how to install and set up the whole

system. It contains 5 chapters and 2 appendixes. Users can configure the system

according to their own needs. This user manual is intended for service personnel with

strong hardware background. It is not intended for general users.

The following section describes the structure of this user manual.

Chapter 1 Introduction

This chapter introduces the framework of this user manual.

Chapter 2 Getting Started

This chapter describes the package contents and system specifications, and illustrates

the physical appearances for SG-S151/SG-S171/SG-S211 system. Read the safety

reminders carefully on how to take care of your system properly.

Chapter 3 System Configuration

This chapter describes the locations and functions of the system motherboard

components. You will learn how to properly configure the connectors and system

configuration jumpers on the motherboard and configure the system to meet your own

needs.

Chapter 4 Software Utilities

This chapter contains helpful information for proper installations of the Intel Chipset

Software Installation Utility, Intel Trusted Execution Engine Driver Utility, Graphics

Driver Utility, LAN Driver Utility, Microsoft Hotfix Driver Utility, Sound Driver

Utility and Intel Serial I/O Driver Utility.

Chapter 5 AMI BIOS Setup

This chapter provides BIOS setup information.

Appendix A System AssemblyDiagrams

This appendix provides the exploded diagrams and part numbers of SG-S151 /

SG-S171 / SG-S211.

Appendix B Technical Summary

This appendix provides the information about the system block diagram, allocation

maps for system resources, Watchdog Timer Configuration and Flash BIOS Update.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere protech Touchscreen Handbücher

protech

protech SP-7755 Bedienungsanleitung

protech

protech PPC-7615 Bedienungsanleitung

protech

protech SP-7625 Bedienungsanleitung

protech

protech SP-6130 Bedienungsanleitung

protech

protech SP-C155 Bedienungsanleitung

protech

protech PPC-7915F Bedienungsanleitung

protech

protech SP-7165 Bedienungsanleitung

protech

protech SP-S174 Bedienungsanleitung

protech

protech prox SP-6558-R Bedienungsanleitung

protech

protech PPC-7368 Bedienungsanleitung

protech

protech SP-6150 Bedienungsanleitung

protech

protech SP-655-R Series Bedienungsanleitung

protech

protech SP-7256 Bedienungsanleitung

protech

protech SP-6110 Bedienungsanleitung

protech

protech prox SP-S154 Bedienungsanleitung

protech

protech SP-7117 Bedienungsanleitung

protech

protech SP-6150 Bedienungsanleitung

protech

protech prox SP-S154 Bedienungsanleitung

protech

protech PPC-7500F Bedienungsanleitung

protech

protech SP-C121 Bedienungsanleitung

protech

protech SG-S156 Bedienungsanleitung

protech

protech SP-7145 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

protech SG-S151 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken