prowarm ProTouch-W Montageanleitung
INSTRUCTIONS
AND USER GUIDE
Smart Thermostat
INSTALLATION AND WIRING INSTRUCTIONS
Loosen fixing screw
located in the bottom of
the thermostat to get the
front panel.
Connect the
thermostat
according to the
Wiring Instruction.
Insert the back
panel into wall box
with provided
screws.
Align top part of front
panel and back panel to
fit these two parts. Then
fix them with screw.
12
43
NOTE: Thermostat should be mounted in a 35mm deep single gang back box
THERE ARE TWO PAIRING METHODS.
IF METHOD ONE DOES NOT WORK PLEASE ATTEMPT PAIRING METHOD TWO
PAIRING YOUR THERMOSTAT TO YOUR APP
‘ProTouch WiFi’ app available from
First download the ProWarm ProTouch App from APP store or Google Play.
You should see the following App icon:
Once downloaded you will need to create an account via email and log in to the App.
You Must ensure that the App has permission to access your location on your phone
settings. The App will ask you this when you install it.
Please also ensure you are connected to your household WIFI during this process.
Step 1
Log in or sign up the
APP through Phone No.
or your Email address.
Step 2
Click “Add Home”,
fill in the information
about the Home.
Step 3
Click Add Device or the ‘+’ symbol
at the top right corner of the screen.
Then click Add Manually followed by
WIFI Thermostat.
St
1
St
ep
3
PAIRING METHOD 1
Note: If you have multiple thermostats that require pairing, please turn all other devices off except the one you
are trying to pair. Once paired this device can be left on whilst pairing another one.
On the thermostat you should see the WIFI symbol flashing fast (2-3 times per second). If the symbol is not
on the screen press and hold the
△
and
▽
arrows for 3 seconds you should see F1 Appear. If F2 appears,
repeat until F1 appears. The WIFI symbol should now begin to flash.
Step 4
Press the button ‘Press
to Connect’ at the
bottom of the screen
and it will ask for your
WIFI password.
Step 5
Enter your WIFI password
from your router ensuring it
is accurate and then press
Confirm. Your App will now
begin the pairing process
with the thermostat.
Step 6
When the connection
is successful, enter a
name for your
thermostat e.g.
Living Room, and
then press Done.
Step 7
Once complete, a
firmware update may
be required. You will
have full access to the
thermostat settings and
functions via the App.
Step 2
Ensure you are connected to your WiFi network and
open the ProTouch WiFi application on your device,
Once open log in to your account following the steps
on screen.
Step 1
On the thermostat press and hold the UP and DOWN arrow together until F2 appears, If the code F1 appears
release the UP and Down arrows and repeat the steps. Please note F2 will disappear from the screen and the
WiFi icon will begin to flash slowly.
PAIRING METHOD 2 Connecting WIFI stats using AP mode
Step 3
In the ProTouch Application press the Plus
symbol at the top of the screen to add a new
device, select WiFi Thermostat.
Step 4
On the add device screen you
need to select AP Mode in the top
right corner, once AP Mode is
selected press the orange button
“Press to Connect” and enter your
WiFi details. Please make sure
these details are correct. Ensure
you have selected the correct WiFi
network and that the password
you enter is accurate, as this will
not work if miss typed. Press the
orange button “Confirm”.
NB: When using an iPhone you will need to
click on ‘Otherwise’ followed by AP mode.
Step 5
Continue following steps that appear on
screen pressing the orange button “Go to
Connect” this will open your Phones WiFi
Settings. Select WiFi hotspot named
SMARTLIFE-XXXXX, once connected to
SMARTLIFE-XXXXX return back to the
ProTouch Application.
Step 6
Once the connection
process is complete press
done, a firmware update
maybe required. Once
complete the thermostat
will be accessible via the
application
THERMOSTAT DESCRIPTION
The new ProTouch WiFi is a smart thermostat used to control your water heating system. It will keep your
home at comfortable temperature whilst minimizing energy use. Install the app on your smart phone to control
your heating system remotely with the WiFi thermostat.
THERMOSTAT DESCRIPTION
TECHNICAL SPECIFICATION
Supply voltage: 50/60Hz 220-240V AC
Max load: 3A
Standby power: ＜2W IP rating: IP21
Max wire diameter: 侑2.5mm²
MAIN FUNCTIONS
Key-lock
Open window detection
Off time frost protection
Floor temperature limitation
Optimum start
Power consumption
monitor (in APP)
Holiday function
Time display
Hold function
TH
E
TE
C
S
up
Ma
x
St
an
Frost symbol
Key lock indicator
WiFi
Floor Temp
Room Temp
Set
Flame symbol
Temperature
Program Parameter edit
Holiday Parameter edit
Clock Parameter edit
Day indicator
Period indicator
Holiday left
Hold left
Clock
Degrees Celsius
Fahrenheit
Floor limit symbol
Advanced Setup
Hold parameter edit
TEMP
HIGH
SET
ROOM TEMP
FLOOR TEMP
HOLD
h
HOLIDAY
EDIT
SAT
FRITHU
WED
MON TUE SUN
WAKE LEAVE RETURN SLEEP LEFT
HOLIDAY HOLD SETUP
Smart Thermostat
Confirm DownUpReturn Power
DISPLAY SYMBOLS
FUNCTION & USER OPERATION
Press to turn on/off
Note: When frost protection mode is active, the thermostat will maintain the frost protection temperature
when in power ‘off’ mode.
Temporarily override temperature
In normal timed power ‘on’ mode, press
△
or
▽
to
change the current period temperature setting. The new
set temperature will flash for 30 seconds. The
thermostat will revert to the normal programmed setting
at the start of the next time period.
Key-lock
Setting Key-lock can prevent children and others from
switching thermostat parameters. In normal timed
power ‘on’ mode, press for 3 seconds to lock the
thermostat and again for 3 seconds to cancel.
Set the Time
In normal timed power ‘on’ mode, Press
Oand the CLOCK symbol will flash.
Press O again to enter day set.
Press
△
or
▽
to set day.
Press O to confirm and enter hour set.
Press
△
or
▽
to set hour.
Press O to confirm and enter minute set.
Press
△
or
▽
to set minute.
Press O to confirm then press to
revert to normal screen.
Note: The WiFi version updates the time
automatically when connected to internet.
Holiday mode
The thermostat will maintain frost protection
temperature until the holiday days ends.
In normal timed power ‘on’ mode, press O to
enter setting.
Press
△
or
▽
to select HOLIDAY.
Press O to enter holiday days set.
Press
△
or
▽
to set holiday days .
Press O to confirm and return to the normal
screen.
Note: In holiday mode, ‘HOLIDAY LEFT’ and
the days remaining will show on display.
Set the holiday days to 0 to cancel holiday
mode.
Hold mode
The thermostat will maintain a ‘Hold Temperature’ permanently
until the unit is changed back to smart mode or until Hold
Mode is turned off.
1. In normal Power ‘on’ mode, Press O to enter bottom menu.
2. Press
△
or
▽
to move across to HOLD.
3. Press O to enter Hold function settings.
4. Press
△
or
▽
to change Hold Mode to ‘ON’.
5. Press O to confirm and the temperature will now flash.
6. Press
△
or
▽
to change the number to the desired
temperature (we recommend between 24-27deg for a
comfortable floor temperature).
7. Press Oto confirm and the thermostat will revert to the
home screen. HOLD should show on the display.
To turn hold mode OFF, repeat steps 1-4, but in step 4 set
the hold mode to OFF instead of ON followed by the ‘O’ to
confirm.
Inhaltsverzeichnis
Andere prowarm Thermostat Handbücher
prowarm
prowarm ProDigital Bedienungsanleitung
prowarm
prowarm protouch iQ Bedienungsanleitung
prowarm
prowarm TR3100 Bedienungsanleitung
prowarm
prowarm ProTouch IQ V2 Bedienungsanleitung
prowarm
prowarm ProTouch Wifi Leitfaden
prowarm
prowarm Pro Digital Remote Bedienungsanleitung
prowarm
prowarm TR3100 Bedienungsanleitung
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
