Psiber CableTracker 12 Bedienungsanleitung

USER GUIDE

CableTracker 12

3. Off CableTracker 12

PSIBER

TEST

PSIBER

WARRANTY

Psiber Data Systems Inc. warrants that the product

shall be free from defects in parts or workmanship for

a period of 12 months from the date of purchase if

used in accordance with Psiber Data Systems Inc.

operating speciﬁcations.

THIS IS THE ONLY WARRANTY MADE BY Psiber

Data Systems Inc. AND IS EXPRESSLY MADE IN

LIEU OF ALL OTHER WARRANTIES EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE.

Should any parts or workmanship prove defective,

Psiber Data Systems Inc. will repair or replace at

Psiber Data Systems’ option, at no cost to the Buyer

except for shipping costs from the Buyer’s location to

Psiber Data Systems Inc. This is Buyer’s SOLE AND

EXCLUSIVE REMEDY under this Agreement. This

warranty does not apply to products which have been

subject to neglect, accident or improper use, or to units

which have been altered or repaired by other than an

authorized repair facility.

Return of Equipment to Psiber Data Systems Inc.

Simply obtain a Return Authorization number from our

Customer Service by calling 619-287-9970. Clearly

mark the RMA# on the shipping label, so the package

can be accepted at Psiber Data Systems Inc.

CableTracker, PSIBER and the PSIBER logo are trademarks of

USER GUIDE

CableTracker 12

3. Off CableTracker 12

PSIBER

TEST

PSIBER

USER GUIDE

CableTracker 12

3. Off CableTracker 12

PSIBER

TEST

PSIBER

USER GUIDE

CableTracker 12

3. Off CableTracker 12

PSIBER

LowBatt

Auto Tone

TEST

PSIBER

WARRANTY

Psiber Data Systems Inc. warrants that the product

shall be free from defects in parts or workmanship for

a period of 12 months from the date of purchase if

used in accordance with Psiber Data Systems Inc.

operating speciﬁcations.

THIS IS THE ONLY WARRANTY MADE BY Psiber

Data Systems Inc. AND IS EXPRESSLY MADE IN

LIEU OF ALL OTHER WARRANTIES EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE.

Should any parts or workmanship prove defective,

Psiber Data Systems Inc. will repair or replace at

Psiber Data Systems’ option, at no cost to the Buyer

except for shipping costs from the Buyer’s location to

Psiber Data Systems Inc. This is Buyer’s SOLE AND

EXCLUSIVE REMEDY under this Agreement. This

warranty does not apply to products which have been

subject to neglect, accident or improper use, or to units

which have been altered or repaired by other than an

authorized repair facility.

Return of Equipment to Psiber Data Systems Inc.

Simply obtain a Return Authorization number from our

Customer Service by calling 619-287-9970. Clearly

mark the RMA# on the shipping label, so the package

can be accepted at Psiber Data Systems Inc.

CableTracker, PSIBER and the PSIBER logo are trademarks of

WARRANTY

Psiber Data Systems Inc. warrants that the product

shall be free from defects in parts or workmanship for

a period of 12 months from the date of purchase if

used in accordance with Psiber Data Systems Inc.

operating speciﬁcations.

THIS IS THE ONLY WARRANTY MADE BY Psiber

Data Systems Inc. AND IS EXPRESSLY MADE IN

LIEU OF ALL OTHER WARRANTIES EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE.

Should any parts or workmanship prove defective,

Psiber Data Systems Inc. will repair or replace at

Psiber Data Systems’ option, at no cost to the Buyer

except for shipping costs from the Buyer’s location to

Psiber Data Systems Inc. This is Buyer’s SOLE AND

EXCLUSIVE REMEDY under this Agreement. This

warranty does not apply to products which have been

subject to neglect, accident or improper use, or to units

which have been altered or repaired by other than an

authorized repair facility.

Return of Equipment to Psiber Data Systems Inc.

Simply obtain a Return Authorization number from our

Customer Service by calling 619-287-9970. Clearly

mark the RMA# on the shipping label, so the package

can be accepted at Psiber Data Systems Inc.

CableTracker, PSIBER and the PSIBER logo are trademarks of

WARRANTY

Psiber Data Systems Inc. warrants that the product

shall be free from defects in parts or workmanship for

a period of 12 months from the date of purchase if

used in accordance with Psiber Data Systems Inc.

operating speciﬁcations.

THIS IS THE ONLY WARRANTY MADE BY Psiber

Data Systems Inc. AND IS EXPRESSLY MADE IN

LIEU OF ALL OTHER WARRANTIES EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE.

Should any parts or workmanship prove defective,

Psiber Data Systems Inc. will repair or replace at

Psiber Data Systems’ option, at no cost to the Buyer

except for shipping costs from the Buyer’s location to

Psiber Data Systems Inc. This is Buyer’s SOLE AND

EXCLUSIVE REMEDY under this Agreement. This

warranty does not apply to products which have been

subject to neglect, accident or improper use, or to units

which have been altered or repaired by other than an

authorized repair facility.

Return of Equipment to Psiber Data Systems Inc.

Simply obtain a Return Authorization number from our

Customer Service by calling 619-287-9970. Clearly

mark the RMA# on the shipping label, so the package

can be accepted at Psiber Data Systems Inc.

CableTracker, PSIBER and the PSIBER logo are trademarks of

On Short

LowBatt

Auto Tone

On Short

LowBatt

Auto Tone

On Short

LowBatt

Auto Tone

On Short

BATTERY

Use one 9 volt alkaline battery.

BATTERY INSTALLATION

Remove the battery cover on the back of the unit,

connect the battery to the battery snap cable, insert the

battey in the battery well and replace the battery cover.

OVERVIEW

The CableTracker12 Tone Generator (CT12) is used to

identify cables and terminations.

1. The CT12 Tone Generator transmits a trace tone on

a connected cable which is detected with a

CableTracker 15 (CT15) or other compatible probe.

2. When the CT15 Probe is near the connected cable

or punchdown, it indicates detection by emitting the

audio signal transmited by the CT12 Tone Generator.

3. The CT12 Continuity test utilizes a bi-colored LED to

indicate resistance between the test leads. The test

displays Opens, Shorts and High Resistance Short.

CONTENTS

• Model 12 Tone Generator

• User Guide

• Battery

• RJ-45 Patch Cable

• RJ-45 to Alligator Clips Adapter

• RJ-45 to BNC and BNC to F Adapters (Optional)

• RJ-45 to Bed of Nails Alligator Clips Adapter (Optional)

CONNECTION

Connect the CT12 Tone Generator directly to an RJ-45

or RJ-11 terminated cable; or an RJ-45 wall outlet using

the RJ-45 Patch Cable; or bare wire by connecting the

RJ-45 to Alligator Clips Adapter. The CT12 transmits an

alternating tone signal through the connected cable.

OPERATION

The CableTracker 12 Tone Generator features one

button operation. Each press of the TEST button

advances the operating mode of the unit. The modes are

selected in the following order:

1. Auto/Tone - Alternating tone will automatically

turn off after approximately 10 minutes.

2. On/Tone - Alternating tone will not turn off

until the test button is pressed again.

3. Off CableTracker 12

Cable

Tracker

Test Button

RJ-45 Connector

SHORT -

Continuity test

indicates the

resistance

between the test

leads.

AUTO - Transmits a tone

signal or tests continuity

for 10 minutes and then

shuts down to conserve

battery life.

LOW BATTERY - When the

battery is below the level

required for the CT12 to

operate properly,

the “LowBatt”

indicator

illuminates.

4. Off - No signal transmited.

PSIBER

LowBatt

Auto Tone

TEST

On Short

ON - A

tone signal

transmits

continuously

until the

operator

selects Test

again.

TONE - A tone

signal is transmited

3. Auto/Short - Continuity test indicates the resistance

between the test leads. LED Color Resistance:

Green (Open) R ≥ 300KΩ

Orange (High Resistance Short) 5KΩ < R < 300KΩ

Red (Short) R ≤ 5KΩ

BATTERY

Use one 9 volt alkaline battery.

BATTERY INSTALLATION

Remove the battery cover on the back of the unit,

connect the battery to the battery snap cable, insert the

battey in the battery well and replace the battery cover.

OVERVIEW

The CableTracker12 Tone Generator (CT12) is used to

identify cables and terminations.

1. The CT12 Tone Generator transmits a trace tone on

a connected cable which is detected with a

CableTracker 15 (CT15) or other compatible probe.

2. When the CT15 Probe is near the connected cable

or punchdown, it indicates detection by emitting the

audio signal transmited by the CT12 Tone Generator.

3. The CT12 Continuity test utilizes a bi-colored LED to

indicate resistance between the test leads. The test

displays Opens, Shorts and High Resistance Short.

CONTENTS

• Model 12 Tone Generator

• User Guide

• Battery

• RJ-45 Patch Cable

• RJ-45 to Alligator Clips Adapter

• RJ-45 to BNC and BNC to F Adapters (Optional)

• RJ-45 to Bed of Nails Alligator Clips Adapter (Optional)

CONNECTION

Connect the CT12 Tone Generator directly to an RJ-45

or RJ-11 terminated cable; or an RJ-45 wall outlet using

the RJ-45 Patch Cable; or bare wire by connecting the

RJ-45 to Alligator Clips Adapter. The CT12 transmits an

alternating tone signal through the connected cable.

BATTERY

Use one 9 volt alkaline battery.

BATTERY INSTALLATION

Remove the battery cover on the back of the unit,

connect the battery to the battery snap cable, insert the

battey in the battery well and replace the battery cover.

OVERVIEW

The CableTracker12 Tone Generator (CT12) is used to

identify cables and terminations.

1. The CT12 Tone Generator transmits a trace tone on

a connected cable which is detected with a

CableTracker 15 (CT15) or other compatible probe.

2. When the CT15 Probe is near the connected cable

or punchdown, it indicates detection by emitting the

audio signal transmited by the CT12 Tone Generator.

3. The CT12 Continuity test utilizes a bi-colored LED to

indicate resistance between the test leads. The test

displays Opens, Shorts and High Resistance Short.

CONTENTS

• Model 12 Tone Generator

• User Guide

• Battery

• RJ-45 Patch Cable

• RJ-45 to Alligator Clips Adapter

• RJ-45 to BNC and BNC to F Adapters (Optional)

• RJ-45 to Bed of Nails Alligator Clips Adapter (Optional)

CONNECTION

Connect the CT12 Tone Generator directly to an RJ-45

or RJ-11 terminated cable; or an RJ-45 wall outlet using

the RJ-45 Patch Cable; or bare wire by connecting the

RJ-45 to Alligator Clips Adapter. The CT12 transmits an

alternating tone signal through the connected cable.

BATTERY

Use one 9 volt alkaline battery.

BATTERY INSTALLATION

Remove the battery cover on the back of the unit,

connect the battery to the battery snap cable, insert the

battey in the battery well and replace the battery cover.

OVERVIEW

The CableTracker12 Tone Generator (CT12) is used to

identify cables and terminations.

1. The CT12 Tone Generator transmits a trace tone on

a connected cable which is detected with a

CableTracker 15 (CT15) or other compatible probe.

2. When the CT15 Probe is near the connected cable

or punchdown, it indicates detection by emitting the

audio signal transmited by the CT12 Tone Generator.

3. The CT12 Continuity test utilizes a bi-colored LED to

indicate resistance between the test leads. The test

displays Opens, Shorts and High Resistance Short.

CONTENTS

• Model 12 Tone Generator

• User Guide

• Battery

• RJ-45 Patch Cable

• RJ-45 to Alligator Clips Adapter

• RJ-45 to BNC and BNC to F Adapters (Optional)

• RJ-45 to Bed of Nails Alligator Clips Adapter (Optional)

CONNECTION

Connect the CT12 Tone Generator directly to an RJ-45

or RJ-11 terminated cable; or an RJ-45 wall outlet using

the RJ-45 Patch Cable; or bare wire by connecting the

RJ-45 to Alligator Clips Adapter. The CT12 transmits an

alternating tone signal through the connected cable.

OPERATION

The CableTracker 12 Tone Generator features one

button operation. Each press of the TEST button

advances the operating mode of the unit. The modes are

selected in the following order:

1. Auto/Tone - Alternating tone will automatically

turn off after approximately 10 minutes.

2. On/Tone - Alternating tone will not turn off

until the test button is pressed again.

3. Off CableTracker 12

Cable

Tracker

Test Button

RJ-45 Connector

SHORT -

Continuity test

indicates the

resistance

between the test

leads.

AUTO - Transmits a tone

signal or tests continuity

for 10 minutes and then

shuts down to conserve

battery life.

LOW BATTERY - When the

battery is below the level

required for the CT12 to

operate properly,

the “LowBatt”

indicator

illuminates.

4. Off - No signal transmited.

PSIBER

LowBatt

Auto Tone

TEST

On Short

ON - A

tone signal

transmits

continuously

until the

operator

selects Test

again.

TONE - A tone

signal is transmited

3. Auto/Short - Continuity test indicates the resistance

between the test leads. LED Color Resistance:

Green (Open) R ≥ 300KΩ

Orange (High Resistance Short) 5KΩ < R < 300KΩ

Red (Short) R ≤ 5KΩ

OPERATION

The CableTracker 12 Tone Generator features one

button operation. Each press of the TEST button

advances the operating mode of the unit. The modes are

selected in the following order:

1. Auto/Tone - Alternating tone will automatically

turn off after approximately 10 minutes.

2. On/Tone - Alternating tone will not turn off

until the test button is pressed again.

3. Off CableTracker 12

Cable

Tracker

Test Button

RJ-45 Connector

SHORT -

Continuity test

indicates the

resistance

between the test

leads.

AUTO - Transmits a tone

signal or tests continuity

for 10 minutes and then

shuts down to conserve

battery life.

LOW BATTERY - When the

battery is below the level

required for the CT12 to

operate properly,

the “LowBatt”

indicator

illuminates.

4. Off - No signal transmited.

PSIBER

LowBatt

Auto Tone

TEST

On Short

ON - A

tone signal

transmits

continuously

until the

operator

selects Test

again.

TONE - A tone

signal is transmited

3. Auto/Short - Continuity test indicates the resistance

between the test leads. LED Color Resistance:

Green (Open) R ≥ 300KΩ

Orange (High Resistance Short) 5KΩ < R < 300KΩ

Red (Short) R ≤ 5KΩ

OPERATION

The CableTracker 12 Tone Generator features one

button operation. Each press of the TEST button

advances the operating mode of the unit. The modes are

selected in the following order:

1. Auto/Tone - Alternating tone will automatically

turn off after approximately 10 minutes.

2. On/Tone - Alternating tone will not turn off

until the test button is pressed again.

3. Off CableTracker 12

Cable

Tracker

Test Button

RJ-45 Connector

SHORT -

Continuity test

indicates the

resistance

between the test

leads.

AUTO - Transmits a tone

signal or tests continuity

for 10 minutes and then

shuts down to conserve

battery life.

LOW BATTERY - When the

battery is below the level

required for the CT12 to

operate properly,

the “LowBatt”

indicator

illuminates.

4. Off - No signal transmited.

PSIBER

LowBatt

Auto Tone

TEST

On Short

ON - A

tone signal

transmits

continuously

until the

operator

selects Test

again.

TONE - A tone

signal is transmited

3. Auto/Short - Continuity test indicates the resistance

between the test leads. LED Color Resistance:

Green (Open) R ≥ 300KΩ

Orange (High Resistance Short) 5KΩ < R < 300KΩ

Red (Short) R ≤ 5KΩ

Andere Psiber GPS Handbücher

Psiber

Psiber CTK1215 Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung