PTN WP8 Bedienungsanleitung
Programmable Control Panel
PTN Electronics Limited www.PTN-electronics.com
WP8
PTN Programmable Control Panel
USER MANUAL
Version: WP82013V1.1
Programmable Control Panel
PTN Electronics Limited www.PTN-electronics.com
NOTICE: Please read this user manual carefully before using this product.
Update History
Version
Date
Update Content
1.0
2012.02.25
First version.
1.1
2013.05.28
Modified the connecting .
This manual is for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till May 2013. Any changes of
functions and parameters since then will be informed separately. Please refer to
the dealers for the latest details.
This manual is copyright PTN Electronics Limited. All rights reserved. No part of
this publication may be copied or reproduced without the prior written consent of
PTN Electronics Limited.
All product function is valid till 2013-05-28.
Programmable Control Panel
PTN Electronics Limited www.PTN-electronics.com
Table of Contents
1. Introduction................................................................................................................1
1.1 Introduction to WP8..........................................................................................1
1.2 Package Contents ............................................................................................1
2. Features..................................................................................................................... 1
3. Specification...............................................................................................................2
4. Connection Introduction.............................................................................................2
4.1 Introduction of the Interfaces............................................................................ 2
4.2 Connection of Programming and Looping ........................................................4
5. System Operations ....................................................................................................5
5.1 Introductions of the Front Panel........................................................................5
5.2 USB Driver Installation......................................................................................6
5.3 Software Programming.....................................................................................6
5.3.1 Main Menu..............................................................................................7
5.3.2 Panel/Key setting....................................................................................9
5.3.3 Action list ...............................................................................................11
5.3.4 Event setting..........................................................................................11
5.3.5 Event List.............................................................................................. 20
6. System Diagram...................................................................................................... 21
7. Troubleshooting & Maintenance .............................................................................. 22
8. Safety Operation Guide ........................................................................................... 22
9. After-sales Service................................................................................................... 23
Programmable Control Panel
PTN Electronics Limited 1 www.PTN-electronics.com
1. Introduction
1.1 Introduction to WP8
WP8 is a programmable Wall Control Panel. Every button is programmable and works
either individually or together. WP8 is built in the programmable 3 RS232, 1 RS485, 3
Infrared & 2 Relay, and 1 mini USB for programming.
Please notice, RS232 (1) and IR2 share the same port, cannot be used at the same
time. Also, RS232 (2) and IR3 share the same port, cannot be used at the same time.
It can fully control the PTN product, as well as third party devices such as projectors,
screens etc. It is an easy-to-use control device for presentation show rooms,
classrooms and boardrooms.
1.2 Package Contents
1 x WP8
1 x Power adapter (DC 12V)
4 x Captive screw connector
3 x IR emit probe
1 x Button labels
1 x User Manual
Notes：Please confirm if the product and the accessories are all included, if not,
please contact with the dealers.
2. Features
Every button can be programmed to send the bi-direction RS232 and RS485
commands simultaneously to control third party devices.
Every button can be programmed to send the infrared code, control the relay, to let
them work simultaneously to control the third party devices.
Every button is built in the infrared code and RS232 code learning function, and
baud-rate setting.
ID looping function. 99pcs WP8 can be looped and controlled together, by ID
identifying.
Programmed by USB or RS232, working with PTN PC software (PS-WP).
Crystal and backlit buttons with easy user-friendly customizable changeable labels.
The backlit brightness is controllable.
Dimension: 11.4cm long and 7cm wide.
Programmable Control Panel
PTN Electronics Limited 2 www.PTN-electronics.com
3. Specification
Specification
Program Port
USB or RS232
Output Port
3 x RS232, 1 x RS485, 3
x Infrared, 2 x Relay
Serial Control
Port
RS232
Baud Rate
And Protocol
9600 baud, 8 data bits, 1
stop bit, no parity
Software
PS-WP
Temperature
-20 ~ +70°C
Frequency
Response
20Hz ~20KHz
Humidity
10% ~ 90%
Power Supply
100VAC~240VAC,
50/60 Hz
Power
Consumption
1W
Case
Dimensions
Dual-gang electron
box, 114x70 x28mm
Product
Weight
0.15kg
4. Connection Introduction
4.1 Introduction of the Interfaces
Mini USB Connector:
1. Communicate with PC
which uses PS-WP to
program the buttons.
2. Transmit the infrared
data when learning IR
(Optional).
Infrared sensor port:
receive and learn the IR
code, to build the IR
database.
Programmable Control Panel
PTN Electronics Limited 3 www.PTN-electronics.com
The WP8 has various ports in the rear panel, including Lopping port, RS232 port,
RS485 port, IR port, Relay port and Power port. Below is the introduction:
①This port includes two parts:
One part is RS232 (2)/IR3, it can be used for control other devices or looping
output. RS232 (2) and IR3 share the same port, the detailed use depends on the
setting of PS-WP.
Other part is RS232 (3), it can be used for control other devices or looping output,
or connect with PC.
These two parts share the same grounding.
②This port includes: RS232 (1)/IR2, IR1 and RS485.
a) RS232 (1)/IR2: share the same port, the detailed use depends on the setting of
PS-WP. When be used as RS232, it is unidirectional transmission, transmit
data but without receive.
b) IR1: for control other devices, it can be programmable by the PS-WP.
c) RS485: the RS485 can be programmed as different commands and control the
device with RS485 port. The command of RS485 is the same as RS232 (1).
③Low-Voltage relay ports: set the relay on/off by software PS-WP.
④Power connector: 12VDC. Be sure that the “+” and “-” never be mixed or
wrong connection.
①
②
③
④
Programmable Control Panel
PTN Electronics Limited 4 www.PTN-electronics.com
4.2 Connection of Programming and Looping
WP8 can be connected to the computer for programming, to default the functions of
every button. It can be connected by USB or RS232, working with the PS-WPsoftware.
It is shown as below:
Programming Connection
Several pieces WP8 can be also looped to be a system, for control more devices. It is
looped by the inter RS232 setting. Please check the demo picture as below:
Several WP8 Looping connecting
After connect the WP8 as above, and then we should set the ID of each WP8 by
PS-WP. The ID number is from 01 to 99, and it also is the class of WP8 in the loop,
Programmable Control Panel
PTN Electronics Limited 5 www.PTN-electronics.com
different WP8 should set to different ID. After connections finish, we can set the control
modes by PS-WP. For detailed connecting, please check the picture below:
Detailed looping connecting
5. System Operations
5.1 Introductions of the Front Panel
Crystal and luminescent, programmable buttons:
Every button can be programmable with PTN software PS-WP.
Connect the PC via USB or RS232.
And every label inside the button can be changeable. You can choose the label you
need and change it very easily like below:
(For the specific transparent paper table, please contact the local distributor or reseller
for it)
First class
Second class
Last class …
Programmable Control Panel
PTN Electronics Limited 6 www.PTN-electronics.com
5.2 USB Driver Installation
There are USB driver file and PS-WP software in the disk. The PS-WP can run directly
without installation.
But when connect WP8 with PC by USB, it may need to install the USB driver. Use the
driver file to install the driver of USB, we can use USB to program the WP8.
5.3 Software Programming
You can use this PTN software PS-WP to easily set every button of WP8.
After connect WP8 with PC by USB or RS232, we can open the PS-WPto program the
buttons for controlling.
The main window of PS-WP has five parts: main menu, panel (button) setting, event
setting, action list and event list. In this manual we will take WP8-V for example, to
show the uses of all functions.
The main window of PS-WP is as below:
We will introduce all the configurations one by one.
Programmable Control Panel
PTN Electronics Limited 7 www.PTN-electronics.com
5.3.1 Main Menu
The main menu includes file management, system model, connection type and help.
1) File management: Open/Save/Save as a configuration. After program, user can
save the configuration to a file, so that you can use the same configuration next
time.
2) System model: includes WP8-H, WP8-V, WP19R etc, and the buttons interface
view are different with different models. The pictures below show the differences
between WP8-V and WP8-H.
NOTICE: When select the model WP8, it will pop up “Output Port Selection” dialog,
user can select different RS and IR types, depend on the uses of the two shared ports.
The dialog is as the picture below:
Inhaltsverzeichnis
