PULSE+ QUADRA MOON Bedienungsanleitung

Four Way 220 LED DMX Moonflower

Model: QUADRA MOON

www.pulse-light.co.uk

Safety Information

The lightning bolt within a

triangle is intended to alert

the user to the presence of

dangerous voltage levels

within the product s

enclosure.

This voltage may be of

sufficient magnitude to

constitute an electric shock

risk.

To reduce the risk of electric

shock, do not remove cover of

this device. There are no user

serviceable parts inside. Refer

servicing only to qualified

service personnel.

The exclamation point within a

triangle is intended to alert the

user to important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

Safety Precautions

•Read and retain these instructions

•Follow all instructions and heed warnings

•Do not use this device near water or in damp environments

•If the surface becomes dirty, clean only with dry cloth, do not use solvents or thinners

•Install in accordance with the manufacturer s instructions

•Do not install near heat sources such as radiators, heat registers, stoves, or other devices that

produce heat

•Only use accessories specified by the manufacturer

•Refer all servicing to qualified personnel

•If mounting on a stand please ensure the stand has a sufficient load capacity to hold the unit. The

stand must be operated in accordance with the stand manufacturer s instructions.

•Rigging of lighting products should only be carried out by a competent person in accordance with

current guidelines. All fixings used should be correctly rated taking care to observe 10:1 safety

factors and utilise “Secondary” fixings as backup to the primary fixing methods.

•This device must not be exposed to water in any way. No object filled with liquids should be placed

on apparatus

Pulse QUADRA MOON – Four Way 0 LED DMX Moonflower

The Pulse QUADRA MOON features 220 super bright, 5mm LED s offering rich colours and a host of

operating modes and effects. Shining thru four optic lenses the 220x 5mm LED s produce a dazzling array

of beams filling dancefloors. The rugged housing features corner guards to help fend off scratches and

bumps.

Features

•220x 5mm LEDs (48 red, 48 green, 48 blue, 28 white, 48 amber)

•LED display with four button menu system for ease of setup

•15 degree beam angle (per lens)

•Built-in programs: Auto, Sound Active, Slave Mode, Static Colour

•DMX controllable (2CH / 3CH)

•3-pin XLR DMX connections

•Integral microphone for Sound Active mode

•IEC power input

•Low power consumption: 40W

•Dimensions (WxHxD): 500x140x285mm (not including brackets)

•Universal input voltage: AC120-240V/50-60Hz

•Weight: 5.1kg

Operation:

1) Yoke

The QUADRA MOON is fitted with a hanging yoke to allow rigging from trussing or stands. Care

should be taken to ensure all rigging is carried out by a competent person and that all fixings used

are suitably rated.

2) Hand Wheel

The yoke has tilt adjustment built in. Once the desired angle has been set the hand wheels should

both be tightened. Both hand wheels should be inspected on regular occasions to ensure they are

tight.

3) Lens

Clean the lenses on regular occasions with a soft cloth to ensure the QUADRA MOON operates at

the optimum brightness.

4) Chassis

The chassis of the QUADRA MOON features rugged corner guards to help protect from small

scratches and bumps. Transportation in a padded flight case is recommended. The upper panel of

the chassis features ventilation slots, these should be kept clear of dust and blockages.

5) DMX Input

Standard 3-pin XLR male chassis socket for DMX input. Pin configuration for this product is Pin1=

Ground, Pin2= Negative (-ve) and Pin3= Positive (+ve)

6) DMX Output

Standard 3-pin XLR female chassis socket for DMX input. Pin configuration for this product is Pin1=

Ground, Pin2= Negative (-ve) and Pin3= Positive (+ve).

7) Mains Power Input

The QUADRA MOON operates from a standard mains voltage outlet (AC120-240V/50-60Hz). DO

NOT connect this to a dimmer pack as this can damage the unit and/or the dimmer pack. Dimming

or control of this product is done utilising the onboard DMX functions.

8) Mode

Press the “MODE” button to access the internal menu system and select from the different

operating modes.

9) Setup

Press the “SETUP” button to access the sub menu of a selected operating mode (ie speed control

within Auto mode)

10) Up

Press the “UP” button to increase the value of the selected parameter.

11) Down

Press the “DOWN” button to decrease the value of the selected parameter.

12) LED Display

The QUADRA MOON features a four digit LED display allowing the user to setup and program the

unit.

After power on, Press “MENU” button to activate the main menu: Built-in programs mode, Auto

running mode, DMX mode, Slave mode, sound-activated mode.

“SETUP” is to set the relative specification for current mode.

“UP” is to add the value of current specification.

“DOWN” is to decrease the value of current specification.

Built-in Programs: 23 built-in programs allow the user to generate a light show without the need for

a controller. Each program can be adjusted for speed or fade time.

Auto Run: This adds variety to the light show by running the built-in programs one after another in

continuous loop.

DMX mode: Controlled by DMX controller

Slave Mode: Used in conjunction with the Program, Auto, Sound Active or Static Colour modes

Sound Active Mode: In Sound Active mode the fixture will react to the mid/low tones, with each

beat the fixture will move the program forward one step.

Static Colour mode: Static Colours can be preset from 12 selectable colours.

1. Built-in Programs Mode

1. Press MODE, enter the program mode " "

2. Press UP or DOWN button select the program from Pr.01~Pr.23.

FLASH RATE: All built-in programs feature an adjustable flash/strobe mode. Press the SETUP button

while in a selected mode and the display will show " ", using the UP or DOWN button the

flash speed can be adjusted from FS00 thru FS99.

SPEED RATE: Built-in programs Pr.02 thru Pr.10 feature an adjustable fade speed. While the display

shows Pr.02- Pr.10 press the SETUP button, the display will then show " ", the UP or DOWN

buttons will then adjust the programs speed SP01~SP100(FL), a second press of the SETUP button

will then access the flash rate as above.

. Auto run mode

1. Press MODE button, enter the auto program mode “ ”

2. Press SETUP button, the display will show n.001

3. Press UP or DOWN button, setup the number of loops n.001~n.100

4. Press SETUP button, enter setup auto running speed “ ”

5. Press UP or DOWN button, setup the value of speed SP01~SP100 FL

6. Press SETUP button, enter setup auto running program of flash mode“ ”

7. Press UP or DOWN button, setup the value of flash FS00~99

8. Press SETUP button, enter setup auto running program value fade mode “Fd××”

9. Press UP or DOWN button, setup the value fade mode Fd00~99

3. DMX mode

1. Press MODE button, enter DMX mode “ ”

2. Press UP or DOWN button, setup DMX address value d.001—d.512.

3. Press SETUP button, enter setup DMX mode d-P1 (3 channel) or d-P2 (2 channel)

4. Press UP or DOWN button, setup DMX mode : 2-ch or 3-ch

DMX mode 1 (d-P1) = 3-CH

CH1

CH1CH1

CH1

CH2

CH2CH2

CH2

CH3

CH3CH3

CH3

NO.

NO.NO.

NO.

DMX value

DMX valueDMX value

DMX value

FUNCTION

FUNCTIONFUNCTION

FUNCTION

SPEED

SPEEDSPEED

SPEED

FLASH

FLASHFLASH

FLASH

1 0 OFF NO USE NO USE

2 1--10 PROGRAM01

SPEED

0—255

SPEED

0—255

FLASH

0—255

FLASH

0—255

3 11--21 PROGRAM02

4 22--32 PROGRAM03

5 33--43 PROGRAM04

6 44--54 PROGRAM05

7 55--65 PROGRAM06

8 66--76 PROGRAM07

9 77--87 PROGRAM08

10 88--98 PROGRAM09

11 99--109 PROGRAM10

12 110--120 PROGRAM11

13 121--131 PROGRAM12

14 132--142 PROGRAM13

15 143—153 PROGRAM14

16 154--164 PROGRAM15

17 165--175 PROGRAM16

18 176--186 PROGRAM17

19 187--197 PROGRAM18

20 198--208 PROGRAM19

21 209--219 PROGRAM20

22 220--230 PROGRAM21

23 231--241 PROGRAM22

24 242--252 PROGRAM23

25 253--255 Sound Mod S nsitivity 0—255

DMX mode (d-P ) = -CH

CH1

CH1CH1

CH1

CH2

CH2CH2

CH2

NO.

NO.NO.

NO.

DMX

DMXDMX

DMX

Value

ValueValue

Value

FUNCTION

FUNCTIONFUNCTION

FUNCTION

FLASH

FLASHFLASH

FLASH

1 0 OFF NO USE

2 1—20 R

FLASH

0—255

3 21—41 G

4 42—62 B

5 63—83 Y

6 84—104 W

7 105—125 RG

8 126—146 GB

9 147—167 BY

10 168—188 YW

11 189—209 RGB

12 210—230 RGBW

13 231—251 RGBYW

14 252--255 Sound activ Mod S nsitivity 0—255

6. Slave Mode

Press the MODE button until the display shows “ ”. The slave fixtures will then mirror the effect

generated by the master (Auto, Master/Slave, Sound Active and Static Colour)

For Master/Slave mode to operate the fixtures must be connected in a chain using the DMX in/out sockets.

The master must be the first fixture in the chain.

6. Sound-active

1. Press the MODE button, until the sound active mode “ ” is displayed on the menu.

2. Press the UP or DOWN button to setup the sensitivity of the sound active menu SU.00~SU.31.

Notice: After 20 seconds inactive, the LED display will switch off. If any button is pressed, the LED display

will be resume to the original state. All buttons will then work as normal.

6. Static Colour Select

Press the “MODE” button to select , there are 12 built-in static color effects. You can select

different effect by pressing “UP” and “DOWN” buttons.

Connection:

Pulse DMX fixtures should be connected using high quality, digital signal specific cables to help prevent

connection issues or data errors. It is also best practice to terminate all DMX lines using a DMX Terminator

are available from Pulse retailers & distributors (Code: DMXTERM-3P or DMXTERM-5P). The terminator

should be inserted into the last fixture in each DMX chain.

DMX Pin Configuration

Pin1= Ground

Pin2= Negative (-ve)

Pin3= Positive (+ve).

Care should be taken when manufacturing DMX cables to ensure above pinout is observed. Do not connect

the cable s shield conductor to the ground lug or allow the shield/ground conductor to come in contact

with the XLR s outer casing. Grounding the shield could cause a short circuit and erratic behaviour.

Trouble Shooting:

Unit does not power up: Check mains supply. If mains supply is correct check the fuses in all power

cords and on the fixture. Disconnect all cabling and fixtures from the mains supply before changing mains

fuses.

Unit does not respond to DMX: Check DMX cabling to ensure reliable data connection including DMX

polarity (see diagram above). Check DMX address settings in line with the DMX controller or console.

Unit does not respond to SOUND: The internal microphone features a filter to cancel out high pitched

tones including treble. The fixture will respond to the lower mid and bass tones. The microphone requires

a reasonable sound level before it will activate and trigger the next step.

Compliance

When this product reaches the end of its life, do not dispose with household or general waste. See

www.recycle-more.co.uk for details of how to dispose of PULSE products in an environmentally sound

fashion, or contact PULSE directly via www.pulse-audio.co.uk

Warranty

Pulse products are warranted, by Pulse, against manufacturer defects for a period of one year from the original date

of purchase. This warranty is limited to manufacturer defects, in either materials or workmanship. PULSE, or any

other worldwide divisions of Premier Farnell PLC, is not responsible for any consequential or inconsequential damage

to any other component, structure or the cost of installation or removal of said items. Defective items should be

returned to the retailer/distributor from whom they were originally purchased. Batteries are classed as a consumable

item, as a result any battery will only carry a 90 day warranty from date of purchase.

This warranty will not cover damage due to improper use such as (and not limited to) damaged cones, mounting

frames, voice coils or items damaged by weather including exposure to moisture.

For questions or specific information regarding warranty replacement or repair, contact:

PULSE

www.pulse-light.co.uk

Inhaltsverzeichnis

Andere PULSE+ Scheinwerfer Handbücher

PULSE+

PULSE+ ECO LED PAR56 MKII Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung