PureLink HT-150 Bedienungsanleitung

HT-150 Owner’s Manual

1 x 5 HDMI to HDBaseT Distribution Amplifier

PureLinkTM

535 East Crescent Avenue

Ramsey, NJ 07446

USA

Tel: +1.201.488.3232

Fax: +1.201.621.6118

E-mail: sales@purelinkav.com

www.purelinkav.com

For order support, please contact your local dealer.

For technical support, please contact us at support@purelinkav.com

PureLink by Dtrovision

TABLE OF CONTENTS

Chapter 1. Product Overview

1.1 Safety Precautions --------------------------------------------------------------- 3

1.2 Product Description --------------------------------------------------------------- 4

1.3 Product Features --------------------------------------------------------------- 4

1.4 What’s in the Box --------------------------------------------------------------- 4

1.5 Common Application --------------------------------------------------------------- 5

1.6 Installation Guidelines --------------------------------------------------------------- 6

1.7 Matching Receiver Options -------------------------------------------------------------- 6

1.8 EDID Management ---------------------------------------------------------------- 7

1.9 IR Cable Connection Guide ------------------------------------------------------------- 8

Chapter 2. Product Specifications

2.1 HT-150 Specification --------------------------------------------------------------- 9

2.2 HCE II Rx Specification --------------------------------------------------------------- 9

2.3 HTR Rx Specification --------------------------------------------------------------- 11

2.4 HDMI Receptacle Pin Assignment -------------------------------------------------- 12

2.5 CATx (HDBaseT) Cable Termination ------------------------------------------------ 12

2.6 Mechanical Specification --------------------------------------------------------------- 14

2.7 Environmental Specification -------------------------------------------------------- 15

2.8 Troubleshooting --------------------------------------------------------------- 15

2.9 Maintenance --------------------------------------------------------------- 15

Chapter 3. Additional Information

3.1 Manufacturer’s Warranty (2-Year) ------------------------------------------------- 16

3.2 Customer Service ------------------------------------------------------------------- 16

PureLink by Dtrovision

Chapter 1. Product Overview

1.1 Safety Precautions

All safety instructions should be read and understood before the unit is operated.

The owner’s manual and safety instructions should be retained for future reference.

Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp

cloth only.

Keep away from wet, magnetic, and flammable surfaces or substances.

Always use the correct external power supply (indicated on the product label) when operating this unit.

This unit may be equipped with a 3 wire grounding-type plug - a plug having a third (grounding) pin.

This pin will only fit in to a grounding type power outlet. If you are unable to insert the plug in to the

outlet, contact your electrician to replace your obsolete outlet.

Air vents should be kept clean and unobstructed at all times.

Please refrain from using frayed power cords and damaged wall outlets.

Do not place any heavy objects or equipment on top of the unit.

If you experience any malfunctioning of product or have any question as to operation of the

product, please contact our customer service center.

PureLinkTM

Tel: 201.488.3232

Email: support@purelinkav.com

PureLink by Dtrovision

Welcome!

Congratulations on your purchase of the PureLink HT-150 HDMI to HDBaseT distribution amplifier.

This manual contains information that will assist you in installing and operating the product.

1.2 Product Description

PureLink HT-150 HDMI to HDBaseT distribution amplifier is designed to distribute a single HD digital signal into

multiple displays over long distances without any degradation of original signal quality or distortion of the image.

HT-150 extends HD audio, video and IR control signals up to 330ft over a CATx cable. A dedicated IC chipset

makes HT-150 capable of amplifying and distributing highest quality of video signal and true HD digital contents.

In addition, HT-150 offers quick and easy plug and play installation for commercial and residential system.

1.3 Product Features

Distribute a single source to maximum five (5) displays

1 x HDMI input, 1 x HDMI output and 4 x CATx (HDBaseT) outputs

Extend a source at 1080p up to 330ft over single CATx cable with HTR HDBaseT extender receiver

(230ft with HCE II Rx)

HT-150’s CATx (HDBaseT) output can send signal directly to PureLink HDBaseT extender receiver,

eliminating the need of matching transmitter

Uncompressed high definition video up to 1080p@60Hz

HDMI 1.3 with 3D support

HDCP compliant

Local HDMI output for in room display, AVR, or cascading to another distribution amplifier

IR ports remote location AV devices control

High Quality Picture – No signal loss and digital noise free

1.4 What’s in the Box

HT-150 : One (1) unit

IR emitter : One (1) unit

IR receiver : One (1) unit

DC 12V 4.2A power supply adapter : One (1) unit

User’s Manual

Option Product: HCE II Rx (PureLink’s HDBaseT extender receiver)

HTR Rx (PureLink’s HDBaseT extender receiver)

PureLink by Dtrovision

TWC6 (PureLink’s certified CATx cable with TotalWire Technology)

PI (PureLink’s PureInstall HDMI cable with TotalWire Technology)

1.5 Product application notes

Figure 1 – Schematic Connection Diagram of HT-150

PureLink by Dtrovision

Figure 2 – Schematic Connection Diagram of HT-150

Figure 3 – Schematic Connection Diagram of HT-150

PureLink by Dtrovision

1.6 Installation

Important : Please use the installation procedure below. Improper or no operation may result if the start

up sequence is not correctly followed.

1. Carefully unpack the contents of the shipping group

2. Turn off the entire system before connecting

3. Connect your video source’s HDMI output port to the HT-150’s HDMI input port using a standard HDMI

cable (not included)

4. For local HD display, connect HT-150’s HDMI output port to your HD display’s HDMI input port

5. For remote location HD displays, connect HT-150’s CATx output port to PureLink HDBaseT extender

Rx’s CATx input port

6. Connect PureLink HDBaseT extender Rx’s HDMI output port to HD display’s HDMI input port

7. Plug the 12V power supply to HT-150

8. Plug the 12V wall mount power supply into the wall outlet

9. Turn power on the source and the display

1.7 HT-150’s matching receiver options ;

HCE II Rx : CATx (HDBaseT) to HDMI receiver. IR. 230ft (70m)

HTR Rx : CATx (HDBaseT) to HDMI receiver. IR. 330ft (100m)

* for detail specification information about HCE II Rx and HTR Rx, please go to pg 9-11.

Caution :

HT-150 is not designed to work in a network environment, do not connect it to network to avoid

damage

Do not place IR transmitter near from IR receiver to avoid mutual interference

The CATx wiring must be away from any elecromagnetic wave equipment, i.e : mobile phone,

microwave, radio, fluorescent lamp, high voltage power lines.

1.8 EDID Management

PureLink HT-150 provides Auto EDID management system; easy and fail safe way to handle EDID, via

pre-loaded factory default 1080p 2ch and EDID emulation.

What's EDID?

PureLink by Dtrovision

Extended Display Identification Data (EDID) is an information set that digital display provides to describe its

capabilities to a Video source. Video source will know what kinds of displays are connected and it will determine

which resolution to Output according to the EDID information received from the display.

The EDID normally includes manufacturer name and serial number, sets of capable resolution including native

resolution, supported timing, pixel mapping data (for digital displays only) and etc.

In a digital connectivity environment; in order to support the maximum resolution of connected monitor, EDID

handshake is a critical because improper EDID handshake between sources to the display will result in no image

on the display.

EDID handshake may sound simple; however, with multiple peripheral devices within the chain, display's EDID

information easily get lost or blocked while it is traveling to the source device.

HT-150 provides Auto EDID management system to meet today’s sophisticated digital connectivity integration

environment. There is an EDID setting DIP switch on the back of the unit;

EDID

SETTING

DIP Switch Position EDID function

Dip switch 1,2,3,4 “up” position Communicate EDID with factory default at 1080p 2ch

Dip switch 1, 2 "down" position & 3,4 "up" position Communicate EDID with output #1 (HDMI) connected display

Dip switch 2 "down" position & 1,3,4 "up" position Communicate EDID with output #2 (CATx) connected display

Dip switch 3 "down" position & 1,2,4 "up" position Communicate EDID with output #3 (CATx) connected display

Dip switch 4 "down" position & 1,2,3 "up" position Communicate EDID with output #4 (CATx) connected display

1.9 IR cable connection guide

PureLink by Dtrovision

There are two (2) IR ports on the HT-150 unit, 1 x IR Tx, and 1 x IR Rx.

IR Tx port is to send IR signals to remote location AV devices (mostly displays) via CATx (HDBaseT) cable

from a local source near HT-150 (ex. Blu ray player).

IR Rx port is to receive IR signals from remote locationAV devices (mostly displays) via CATx (HDBaseT)

cable to control a local source near HT-150 (ex. Blu ray player).

* Please note that HT-150 can only send same IR commands to all outputs. If more than one of the displays

Share the same IR codes, they will react to the commands simultaneously. To avoid this, please use different

brands or models of the displays.

Common IR cabling application would be like below diagram;

Figure 4 – Schematic IR Connection Diagram of HT-150

PureLink by Dtrovision

Chapter 2. Product Specifications

2.1 HT-150 Specification

Item Description

Model HT-150

Input type HDMI, 1 port

IR, 1 port

Output type

HDMI, 1 port

CATx, 4 ports

IR, 1 port

Graphic Resolution VGA / SVGA / XGA / UXGA / WUXGA

480i/p , 720i/p , 1080i/p

HDBaseT Output Distance 330ft (100m) with HTR Rx

230ft (70m) with HCE II Rx

HDBaseT IR Carrier Frequency 30 ~ 60 KHz

HDBaseT IR Emitter/Receive angle

HDBaseT IR Emitter/Receive distance 16 ft (5m)

Connector type

HDMI 19 Pin Female

RJ 45

3.5mm Phone Jack (for IR)

DC Power Jack

Supported format HDMI 1.3

HDCP Compliant Yes

Power Supply DC +12V , 4.2A

Dimension (W x D x H) 9.97” x 5.7” x 1.57” (253 x 145 x 40 mm)

Weight 1.9 lbs (0.86 kg)

2.2 HCE II Rx Specification

Item Description

Model HCE II Rx

Inhaltsverzeichnis

Andere PureLink Verstärker Handbücher

PureLink

PureLink PT-SP-HD12-4K Bedienungsanleitung

PureLink

PureLink PT-PK100 Bedienungsanleitung

PureLink

PureLink PT-SP-HD18-4K Bedienungsanleitung

PureLink

PureLink HD-2100 Bedienungsanleitung

PureLink

PureLink DD-120 Bedienungsanleitung

PureLink

PureLink UHD2-140 Bedienungsanleitung

PureLink

PureLink UHD-140 Bedienungsanleitung

PureLink

PureLink DD-250 Bedienungsanleitung

PureLink

PureLink HD-250 Bedienungsanleitung

PureLink

PureLink UHD2-140 Bedienungsanleitung

PureLink

PureLink DD-2100 Bedienungsanleitung

PureLink

PureLink PT-SP-HD14-4K Bedienungsanleitung

PureLink

PureLink DD-2100 Bedienungsanleitung

PureLink

PureLink HD-2100 Bedienungsanleitung

PureLink

PureLink HD-120 Bedienungsanleitung

PureLink

PureLink UHD-280 Bedienungsanleitung

PureLink

PureLink DD-120 Bedienungsanleitung

PureLink

PureLink UHD-120 Bedienungsanleitung

PureLink

PureLink HD-250 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung