Puretec SOL-E1 Series Bedienungsanleitung
User Guide
Automatic Timer Water Softening Appliance
SOL-E1 Commercial Series
For correct operation & installation it is essential to observe these instructions.NOV2019
2 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019
What's Inside
What's Inside
Puretec Customer Service ............................................................................................................................3
Installation Record ............................................................................................................................................4
Before Installation..............................................................................................................................................5
Specications........................................................................................................................................................7
Exploded Diagram..............................................................................................................................................8
Parts Identication.............................................................................................................................................9
Installation Procedure...................................................................................................................................10
Programming .....................................................................................................................................................14
Start-Up ................................................................................................................................................................15
Regeneration......................................................................................................................................................15
Replenishment of Salt Supply ..................................................................................................................16
Type of Salt to Use.........................................................................................................................................16
Brine Tank Clean-Out (Yearly)...................................................................................................................16
Media Replacement........................................................................................................................................16
Bypass Valve Operation - optional accessory .................................................................................17
Troubleshooting Guide..................................................................................................................................18
Warranty...............................................................................................................................................................22
3Copyright © Puretec Pty Ltd 2019 SOL-E1 Commercial Series User Guide
Puretec Customer Service
Puretec Customer Service
Thank you for purchasing a Puretec Sorol Automatic Timer Water Soening System. Your
system is a proven performer manufactured from only quality materials and components.
It will give years of reliability and trouble free operation if maintained properly.
This user guide is designed for Puretec SOL-E1 Water Treatment Systems. Be careful to
ensure the information and illustration is applicable to your particular unit.
Caution: Do not use with water that is microbiologically unsafe or without
adequate disinfection before or aer the system.
The systems are designed for metropolitan supply water but can be used in other
situations. For other types of water supply, please contact your local Puretec dealer.
Puretec Water Soeners are designed to run economically for many years, dependent on
the initial installation and periodic maintenance.
Flush system for 5 minutes or more, aer any period of non-use, more than 2 weeks.
Note: For point of entry installations an approved dual check backow prevention device
must be installed.
When line pressure exceeds 500 kPa, a pressure limiting valve must be installed.
Note: Water soener salt not supplied.
Installation Note: A water lter system/tap, like any product, has a limited life and may
eventually fail. Also sometimes failure happens early due to unforeseen circumstances.
To avoid possible property damage, this product should be regularly examined for
leakage and/or deterioration and replaced when necessary. A drain pan, plumbed to an
appropriate drain or outtted with a leak detector, should be used in those applications
where any leakage could cause property damage, and/or the water supply should be
turned o if no one is home/present.
4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019
Product Information
Model Number:
Serial / Batch Number:
Purchased from:
Date of Installation:
Installer / Plumber Details:
Regen Frequency: ________ Days
Water Analysis Information
Hardness: ___________ ppm / mg/L
Iron: ___________ ppm / mg/L
Manganese: ___________ ppm / mg/L
pH: ___________
TDS (Total Dissolved Salts): ___________ ppm / mg/L
Conductivity: ___________ EC / uS/cm
Chloride: ___________ ppm / mg/L
Sodium: ___________ ppm / mg/L
Installation Record
For future reference, ll in the following data:
Installation Record
5Copyright © Puretec Pty Ltd 2019 SOL-E1 Commercial Series User Guide
Before Installation
Professional Installation Required
• Installation requires shutting water o to home, cutting home water supply pipe
and using a welding torch to add piping and ttings. Specialised tools and skills are
required, this must be completed by a qualied tradesperson.
Make Sure Your Water Has Been Thoroughly Tested
• An analysis of your water should be made prior to the selection of your water
conditioning equipment. Your dealer will generally assist with this service for
you, and may send a sample to an independent laboratory for analysis and
recommendations. Enter your analysis information on page 4 for your permanent
record.
• Soeners are designed to reduce hardness but can handle reasonable amounts
of soluble iron if consideration is given to content when selecting model and
regeneration settings. For best results contact Puretec to discuss.
Install Water Conditioning Equipment Correctly
Select the location of your water soener with care. Various conditions which contribute
to proper location are as follows:
• Install as close as possible to a drain.
• Install in correct relationship to other water treatment equipment. Contact Puretec
for assistance.
• Install the soener in the supply line BEFORE the water heater. Temperatures above
43.3°C (110°F) will damage the soener and void the warranty.
• DO NOT install the soener in a location where freezing temperatures occur.
Freezing may cause permanent damage and will also void the warranty.
• DO NOT install where water hammer conditions may occur without installing an
arrestor.
• Allow sucient space around the installation for easy servicing. Provide a non-
switched 240V power source for the control valve.
Before Installation
6 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019
Before Installation
• The control valve, ttings and/or bypass are designed to accommodate minor plumbing
misalignment but are not designed to support the weight of a system or the plumbing.
• Do not use petroleum jelly, oils, other hydrocarbon lubricants or spray silicone anywhere.
A silicon lubricant may be used on the black o-rings but it is not necessary.
• Do not use pipe dope or other sealants on threads. Thread seal tape is the preferred
sealant but is not necessary on the nut connection or caps because of o-ring seals.
• All plumbing should be done in accordance with local plumbing codes. The pipe size for
the drain line should be a minimum of ⅝”.
• Avoid getting primer and solvent cement on lter system.
• Install grounding strap on metal pipes if required.
• Ensure the system is protected against high pressure and extreme temperatures.
Things to Remember While Planning Your Installation:
• All installation procedures MUST conform to local plumbing codes.
• If lawn sprinklers, a swimming pool, or geothermal heating/cooling or water for
other devices/activities are to be treated by the Sorol system, a larger model MUST
be selected to accommodate the higher ow rate, treated water volume, plus the
backwashing requirements of the Sorol system. Contact Puretec for assistance.
WARNINGS
Note: Solder joints must be done prior to connecting to the valve ttings. Leave at least 6”
between the tting and solder joints when soldering pipes. Failure to do this could cause
heat damage to the ttings.
This should be carried out by a qualied tradesman.
7Copyright © Puretec Pty Ltd 2019 SOL-E1 Commercial Series User Guide
Specications
Specications
Operating Pressure Min/Max 140 - 520 kPa
Operating Temperature Min/Max: 0 - 48 °C (protect from
freezing)
Electrical Connection: 240V / 50 Hz
Inlet/outlet Connection: 25 mm
Drain Connection: ⅝”
Overow Connection: ⅝”
SOL-45 SOL-60
Width (mm) (W): 260 mm 300 mm
Height (mm) (H): 1570 mm 1525 mm
Maximum Salt Storage
Capacity: 75 kg 75 kg
(W)
430
900
(H)
8 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019
Exploded Diagram
Exploded Diagram
2
1
3
4
5
7
6
10
9
11
12
13
14
15
8
9Copyright © Puretec Pty Ltd 2019 SOL-E1 Commercial Series User Guide
Parts Identication
Outlet 1"
Control Panel
Inlet 1"
Diagram Identication
Item Part no Description
1 - Presure Tank
2 WTD2030 Riser Pipe
3 WTD1010 Top Screen
4 WTD3030 Pressure Tank UV Sheild
5 WTV4000 Automatic Valve
6 WTB5070 Plastic Fitting Kit, Elbow
7 WTB2100 Valve Cover
8 - Drain Tube Assembly
9 WTV5135 Transformer, Suit Auto Valve
Item Part no Description
10 WTV5000 Bypass Assembly (purchased
separately)
11 KTV6SVC ⅜" Black Tubing
12 KEC66 ⅜" Elbow Connector
13 WTB4190 Brine Pickup Assembly
14 WTB2200 Brine Tank
15 WTB5150 2 Piece Overow
Brine ⅜”
Drain ⅝”
Parts Identication
10 Installation & Operation Manual Copyright © Puretec Pty Ltd 2019
Installation Procedure
⅝" Tubing for drain and
overow (refer to page 13)
Bag of Salt (refer to page
16 for the type of salt to
be used)
Installation Procedure
Ensure water has been tested, Input values into Table on page 4 and the
analysis has been inspected by Puretec.
3
Water Analysis Information
Hardness ___________ ppm / mg/L
Iron ___________ ppm / mg/L
Manganese ___________ ppm / mg/L
pH ___________
TDS (Total Dissolved Salts) ___________ ppm / mg/L
Conductivity ___________ EC / uS/cm
Chloride ___________ ppm / mg/L
Sodium ___________ ppm / mg/L
130
0.3
0.1
7
275
404
121
96
✓
✓
Customer Service Helpline
1300 140 140 (AU) 0800 130 140 (NZ)
✓
Extra items required:
2
Unpack the equipment. Ensure all parts are present and have not been damaged in
trasport. You should have:
1
User Guide
Automatic Timer Water Softening Appliance
SOL-E1 Commercial Series
Forcorrect operation & installation it is essential to observe these instructions.
JAN2019
Water Soener
User GuideDrain Tube Assembly
(2m of ⅜" tubing)
Bypass Assembly
(purchased separately)
Media
Andere Handbücher für SOL-E1 Series
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Puretec Wasserspender Handbücher
Puretec
Puretec SOL-E3 Series Bedienungsanleitung
Puretec
Puretec Softrol E1 Bedienungsanleitung
Puretec
Puretec CO-RO3 Bedienungsanleitung
Puretec
Puretec UF10 Series Bedienungsanleitung
Puretec
Puretec SOL-E1 Series Bedienungsanleitung
Puretec
Puretec SOL-E3 Series Bedienungsanleitung
Puretec
Puretec Softrol E3 Bedienungsanleitung
Puretec
Puretec Sparq S4 Bedienungsanleitung
Puretec
Puretec SOL-2CI Series Bedienungsanleitung
Puretec
Puretec SOL-TA Series Bedienungsanleitung
