Purmo KABA2 Bedienungsanleitung

KABA2

INSTALLATION

AND OPERATING

MANUAL

A NEW GENERATION THAT TURNS EVOLUTION INTO A REVOLUTION CLASS I – 230V & 400V – 50 HZ

INSTALLATION

OCH

BRUKSANVISNING

EN NY GENERATION SOM FÖRVANDLAR EVOLUTIONEN TILL EN REVOLUTION KLASS I - 230V & 400V - 50 HZ

INSTALLASJON

BRUKSANVISNING

EN NY GENERASJON SOM GJØR EVOLUSJON TIL EN REVOLUSJON SKLASSE I – 230V & 400V – 50 HZ

INSTALLATIONS-

BETJENINGSVEJLEDNING

EN NY GENERATION, DER GÅR EVOLUTION TIL EN REVOLUTION KLASSE I – 230V & 400V – 50 HZ

ASENNUS-

YTT

OHJE

UUSI SUKUPOLVI, JOKA MUUTTAA EVOLUUTIOSTA VALLANKKUUKSEN CLASS I – 230V – 50 HZ

(mm)

300

100 - 150

173

500

100 - 150

373

PRODUCT

INFORMATION

PRODUCT

INFORMATION

PRODUCT

INFORMATION

SAFETY

INFORMATION

Due to the safety standard EN 60335,

the text below is obligatory for all electric

products, not only radiators.

This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning

use of the appliance in a safe way and

understand the hazards involved. Children

shall not play with the appliance. Cleaning

and user maintenance shall not be made

by children unless they are older than 8

and supervised. Keep the appliance and

its cord out of reach of children aged less

than 8 years. Children of less than 3 years

should be kept away from the unit unless

continuously supervised. Children aged

from 3 years and less than 8 years shall

only switch on/off the appliance provided

that it has been placed or installed in its

normal operating position and they have

been given supervision or instruction

concerning use of the appliance in a safe

way and understand the hazards involved.

Children aged from 3 years and less than 8

years shall not plug in, regulate and clean

the appliance or perform user maintenance.

CAUTION

THIS PRODUCT MUST NOT BE INSTALLED IN A BATHROOM OR OTHER

SIMILAR HIGH HUMIDITY AREA.

CAUTION

SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND CAUSE BURNS.

PARTICULAR ATTENTION HAS TO BE GIVEN WHERE CHILDREN AND VULNERABLE

PEOPLE ARE PRESENT. IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE

RADIATOR. ”DO NOT COVER” MEANS THAT THE RADIATOR MUST NOT BE USED

FOR DRYING CLOTHES, FOR EXAMPLE, BY PLACING THEM DIRECTLY ON THE

RADIATOR.

WASTE DISPOSAL ACCORDING TO WEEE DIRECTIVE

(2012/19/EU)

WASTE DISPOSAL ACCORDING TO THE WEEE DIRECTIVE (2012/19/EU). THE SYMBOL

ON THE PRODUCT LABEL INDICATES THAT THE PRODUCT MAY NOT BE HANDLED AS

DOMESTIC WASTE, BUT MUST BE SORTED SEPARATELY. WHEN IT REACHES THE END OF

ITS USEFUL LIFE, IT SHALL BE RETURNED TO A COLLECTION FACILITY FOR ELECTRICAL

AND ELECTRONIC PRODUCTS. BY RETURNING THE PRODUCT, YOU WILL HELP TO

PREVENT POSSIBLE NEGATIVE EFFECTS ON THE ENVIRONMENT AND HEALTH TO

WHICH THE PRODUCT CAN CONTRIBUTE IF IT IS DISPOSED OF AS ORDINARY DOMESTIC

WASTE. FOR INFORMATION ABOUT RECYCLING AND COLLECTION FACILITIES, YOU

SHOULD CONTACT YOUR LOCAL AUTHORITY/MUNICIPALITY OR REFUSE COLLECTION

SERVICE OR THE BUSINESS FROM WHICH YOU PURCHASED THE PRODUCT. APPLICABLE

TO COUNTRIES WHERE THIS DIRECTIVE HAS BEEN ADOPTED.

SAFETY

INFORMATION

GENERAL

INFORMATION

•

This appliance is a sealed electric radiator.

•

This appliance conforms to the standards EN 60335-1

and EN 60335-2-30.

•

This appliance is insulation class I and has electrical

protection level IP21.

•

This appliance complies with the European Directive

2014/30/EU (CE Marking on all appliances).

•

KABA2:

for wall mounting or freestanding positioning.

230 V – 50 Hz supply.

Supplied with 3 core cable and fitted with an earthed

plug, wall brackets and screws.

or 400 V – 50 Hz supply.

for wall mounting only.

Supplied with 3 core cable, wall brackets and screws.

INSTALLATION

POSITIONING

•

The radiator must be positioned horizontally in order for

it to function correctly.

•

The radiator must be positioned according to the

applicable standards. The minimum distances as

specified in picture 1 should be carefully observed.

•

The radiator must be fixed to the wall using the wall

brackets supplied.

•

The radiator must not be located underneath an electrical

socket.

FIXING

•

Mark out the distance between the brackets and the

positions of the screw holes as shown in the table in

picture

•

Note that the brackets can be used to measure the height of

the bottom fixing hole, see picture

•

For

the correct installation of

radiators it is essential

that

the

fixing of the radiator is carried out in such a way that

it is suitable for intended use AND predictable misuse.

A number of elements need to be taken into consideration

including the fixing method used to secure the radiator

to the wall, the type and condition of the wall itself, and any

additional potential forces, or weights, prior to finalizing

installation.

•

The fixing materials provided are only intended for

installation on walls made of solid wood, bricks, concrete or

on timber-frame stud walls where the fixing is directly into

the timber. All walls being considered should have no more

than a maximum of 3 mm wall finishing. For walls made of

other materials, for example hollow bricks; please consult

your installer and/or specialist supplier.

In all cases it is strongly recommended that a suitably

qualified professional installer or similar tradesperson

carries out the installation.

CONNECTION

•

The electrical installation must comply with local or

national regulations.

•

The radiator must be connected to the electrical supply

using the supply cable fitted to the unit.

•

The radiator is equipped with a non-resettable overheat

protection that trips off if the radiator overheats. If the

radiator is removed from the wall brackets, even for a

short time, it must without exception be switched off, see

picture

. This may even trip the non-resettable overheat

protection. If the overheat protection trips, its thermal fuse

must be replaced; contact your supplier.

GB GENERAL

INFORMATION

OVERVIEW

Electronic PlD control unit for electric radiator, programmable

digital control, white color.

PRODUCT PLUS POINTS

OPERATION

DIAGRAM

• Buttons

overview

Selecting operating modes

Plus and minus buttons, used to set temperatures, time, date and

programs

Save

settings



Indicator overview



Electronic PID control with microprocessor.



Setting temperature can be viewed in all operating modes.



Double

pole

ON/OFF

switch.



Gauge consumption:

Automatic indication of the level of

consumption

according to the setting temperature.

Energy consumption indication: posting of the

estimated

amount of energy consumed in kWh since the

last reset to 0 of

the energy meter.



Open window detection:

Automatic switching to frost

protection mode when the device detect a significant

drop in tem

perature.

7 day program: you have the option, for each day of

the week, of assigning five different program profiles.

Child anti-tamper: The control panel can be locked,

making changes impossible.



Special safety for social or private rental housing:

Limits of the adjustment range of the Comfort

setting tem

perature.

PIN code lock of settings reserved for

professionals.



Active

memory:

Permanent

backup

the

whole

settings

and programming, backup date and time of

3h.

Gauge

consumption

Heating

indicator

Days of the week (1=Monday … 7= Sunday)

Setting

temperature

Open window detection indicator

Keypad

locked

Operation

modes:

Auto

mode

Comfort

mode

Eco

mode

Frost protection mode

Time and date setting mode

Programming mode

Settings

Note

Before carrying out any setting procedures, ensure that

the keypad is indeed unlocked (see page 10).

• Auto

mode

In Automatic Mode, the device will

automatically change from

Comfort

mode to Eco mode according to

the

established program.

• Frost protection mode

This mode enables you to protect

your home against the effects of

cold

weather

(frozen

pipes,

etc.),

maintaining a minimum temperature of

7°C in it at all times. Select this mode

when you will be away from your home

for a

long time (more than 5 days).

GAUGE CONSUMPTION, ENERGY

SAVINGS

SETTING THE COMFORT MODE

TEMPERATURE

POWER

Mode

overview Display

Restoring factory settings

See pages 15, 17 and 20.

SELECTING THE OPERATING MODE

The button allows you to adapt the

operating

schedule of your device to your

needs, depend

ing on the season, whether your

home is occu

pied or not.

Press the button several times to select the

required mode.

Mode

sequence:

ecommended Comfort setting temperature should be lower

equal to 19°C.

the

device

display,

selector

indicates

the

energy

comsump-

tion level by positioning it in front of the color: red, orange or

green. So, depending on the setting temperature, you can

choose your level of energy usage. As the temperature setting

increases, the consumption will be higher.

The gauge appears in Auto, Comfort, Eco and Frost protection

modes and whatever the temperature level.

Mode

overview Display

different

cases

depending

your

set-up

A. 7 day and daily program

Your

device

has

been

programmed

and

executing

Comfort

and

Eco

mode orders in line with the settings and time periods you have selected

(see "7 day and daily program integrated" chapter page 10).

B. Without program

if the 7 day and daily program is not enabled, then your device’s

factory settings mean that it will operate in nonstop Comfort mode, 7

days of the week.

You can access the Comfort temperature set up from the Auto

and Comfort Mode. It is preset to 19°C.

Using

and

you can adjust the temperature from 7°C to

30°C by intervals of 0.5° C.

Note: you can limit the Comfort temperature, see page 14

for more details.

Auto

Comfort

Eco

Frost Protection

Power on switch

Set the switch in ON position in order

to power up the appliance.

• Comfort

mode

Non-stop Comfort mode. The device

will operate 24 hours a day to achieve

the temperature which has been set

(e.g. 19°C). The Comfort mode

temperature level can be set by the

user

(see Setting the comfort mode

temperature page 9).

• Eco

mode

Eco,

which

means

the

Comfort

Mode

temperature minus 3.5°C. This enables

you to lower the temperature

without

having to reset the Comfort Mode

tem

perature.

Select

this

mode

for

short term

absenc

es (between 2 and

24h) and during

the

night.

C - Red color

High Temperature

level: it is advisa

ble

to significantly

reduce the setting

temperature.

Setting

temp.

> 22°C

When the setting

temperature is

higher than 22°C

B -

Orange

color

Average

tempe

rature level: it

advisable

to slightly reduce

the setting

temper

ature.

19°C < Setting

Temp.

≤ 22°C

When the setting

temperature is

higher than 19°C

and lower or equal

22°C.

A - Green color

Setting temp. ≤ 19°C

When the setting

Ideal temperature. temperature is

lower or equal to

19°C

From Auto, Comfort, Eco or Frost protection mode, press

for 5 seconds.

The cursor moves to the setting day and time mode.

It is possible to see the estimation of energy consumption in kWh

since the last reset of the energy meter.

Display of the estimated power consumption

To see this estimation, from Auto,

Comfort, Eco or Frost protection

mode, then press .

To exit the display mode of

consumption: press

or , the device is automatically in

the previous active mode.

Select

using

or . The two hour figures will flash.

Resetting the energy meter

To reset the energy meter, from Auto, Comfort, Eco or Frost pro-

tection mode, then proceed as follows.

Press

simultaneously

and

for more

than 5 seconds.

To exit resetting the energy meter, press or , the

de- vice is automatically in the previous active mode.

The hours will scroll quickly, if you press the or

and hold

them.

Save by pressing .

Keypad lock

To lock the keypad, press the

and buttons and hold

them down for 10 seconds. The

padlock symbol appears

on the display, the keypad is

locked.

The two minute figures will flash.

Select

using or .

Save by pressing

Keypad

unlock

To unlock the keypad, press the and buttons and

hold

them down for 10 seconds again. The padlock symbol

disappears from the display, keypad is unlocked.

The courser above the number 1 (which represents the

Monday) will flash. Select the day using or .

Seve by pressing .

In this mode, you have the option of programming your device,

by setting one of the five programmes on offer for each day of

the week.

Access to the programming mode

From Auto, Comfort, Eco or Frost protection mode, press

for

5 seconds to enter into the programming mode.

Schematic sequence of programming settings:

change

and/or

allocate

programs

press

. To exit the

Setting day and time

In this mode, you can set day and time to program your device

in line with your needs.

setting the time and day mode, press

3 times.

1 2 3 4 5 6 7

Setting

time

Setting

day

Programmes

choice

5 sec.

7 DAY AND DAILY PROGRAM

INTEGRATED, ENERGY SAVINGS

CHILD ANTI-TAMPER,

KEYPAD LOCK/UNLOCK

CONSUMPTION INDICATION

ACCUMULATED IN KWH, ENERGY

SAVINGS

Choices

programmes

Schematic sequence of programmes:

Your

device’s

default

setting

non-stop

Comfort

for

7 days a

week.

With

or , select P1.

P1 will flash. Press

for 5 seconds to make changes.

Programmes overview

Comfort:

your device will operate in Comfort mode, 24 hours a

day, as regards each day selected.

Note:

You can set the Comfort mode temperature to the tem-

perature you require (see Setting the comfort mode tempera-

ture page 9).

Eco: The device will operate 24 hours a day in Eco mode.

Note:

You can set the temperature-lowering parameters (see

Setting the Eco mode temperature lowering-level page 14).

P1: your device will operate in Comfort mode from 06:00 to

22:00 (and in Eco mode from 22:00 to 06:00).

P2: your device will operate in Comfort mode from 06:00 to

09:00 and from 16:00 to 22:00 (and in Eco mode from 09:00 to

16:00 and from 22:00 to 06:00).

P3: your device will operate in Comfort mode from 06:00 to

08:00, from 12:00 to 14:00 and from 18:00 to 23:00 (and in Eco

mode

from

23:00

06:00,

from

08:00

12:00

and

from

14:00

to 18:00).

Potential modifications of programmes

If the default time schedules for the P1, P2 and P3 programmes

does not suit your routines, you can change them.

Modifying the P1, P2 or P3 programmes.

If you modify the time schedules for the P1, P2 or P3 programmes,

the schedules will be modified for all the days of the week for

which P1, P2 or P3 had been set.

If you just set the time and day, go to step 2.

From Auto, Comfort, Eco or Frost protection mode, press

for 5 seconds.

When the cursor moves above the setting time symbol ,

press shortly.

The P1 start time (which by default is 06:00) will flash.

Using

or , you can change this time, by increments of

30 minutes.

Save by pressing .

The P1 end time (which by default is 22:00) will flash. Using

, you can change this time, by increments of 30

minutes.

Save by pressing

Press or

. The cursor moves above

prog

Press to exit the programming Mode and return to Auto

Mode.

Note:

without action on the keys, it will return to Auto after a few

minutes.

Choices and allocation programs

If you just set the time and day, the cursor moves automati-

cally under PROG.

From Auto, Comfort, Eco or Frost protection mode, then press

for 5 seconds. When the cursor positioned under the set

time symbol , press

again.

Prior

information:

display

area

Correspondence days /

numbers

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Comfort

Eco

Inhaltsverzeichnis

Sprachen:

Andere Purmo Heizung Handbücher

Purmo

Purmo COMPACT VENTIL PLINTH Bedienungsanleitung

Purmo

Purmo JARL 10 05 230 03 2 W Bedienungsanleitung

Purmo

Purmo DION Twin-M Bedienungsanleitung

Purmo

Purmo FLORES Series Bedienungsanleitung

Purmo

Purmo YALI DIGITAL PLUS Bedienungsanleitung

Purmo

Purmo Squara Bedienungsanleitung

Purmo

Purmo FLORES E Wartungs- und Serviceanleitung

Purmo

Purmo RADSON APOLIMA Wartungs- und Serviceanleitung

Purmo

Purmo APOLIMA Bedienungsanleitung

Purmo

Purmo YALI PARADA PLUS Bedienungsanleitung

Purmo

Purmo BH 300 Bedienungsanleitung

Purmo

Purmo RAMO PLINTH Bedienungsanleitung

Purmo

Purmo ULOW-E2V Bedienungsanleitung

Purmo

Purmo TECHNICAL POCKET BOOK - Bedienungsanleitung

Purmo

Purmo RADSON MINORCA Wartungs- und Serviceanleitung

Purmo

Purmo BR222 Bedienungsanleitung

Purmo

Purmo INSPIRATION - Bedienungsanleitung

Purmo

Purmo RADSON JAVA Wartungs- und Serviceanleitung

Purmo

Purmo KABA Bedienungsanleitung

Purmo

Purmo H10 Bedienungsanleitung

Purmo

Purmo RADSON EVIA Wartungs- und Serviceanleitung

Purmo

Purmo RADSON ELATO Wartungs- und Serviceanleitung

Purmo

Purmo V10 Bedienungsanleitung

Purmo

Purmo MCW-V Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung