Pyle PLMRMBT5B Bedienungsanleitung

Thank you for making a marine your choice for audio entertainment!

It’s compact, waterproof design allows for flexible mounting possibilities, and

makes it simple to expand the audio system capabilities for vehicle.

PLMRMBT5B / PLMRMBT5S

Features:

● 2 x 150 Watts RMS @ 4 Ohm’s

● 2 x 300 Watts MAX @ 4 Ohm’s

●2 x 500 Watts RMS @ 2 Ohm’s

● Electronic Crossover Network

● 2 Ohm Stereo Stable

● Anti-Thump Turn- On

● Soft Turn On / Off

● Adjustable High / Low Level Inputs

● RCA Line Low Level Input

● Power Protection Circuitry

● Marine Grade Bluetooth Flush Mounted Controller

● S/N Ratio: > 95 dB

● @10w Output Power/T.H.D: 0.13%

● Channel Separation: > 65 dB

● Frequency Response: 10-40K Hz

● Fuse: 10 A

● Dimensions: 5.51”(L) x 3.54” (W) x 1.97”(H)

Accessories:

●iPhone / Android Phone / Waterproof 3.5mm Stereo to RCA Adaptor

●Set of DC 12 Volt Connection Cables Included

●Sold as: Unit

PLMRMBT7B / PLMRMBT7S

● 4 x 150 Watts RMS @ 4 Ohm’s

● 4 x 300 Watts MAX @ 4 Ohm’s

● 4 x 500 Watts MAX @ 4 Ohm’s

● Electronic Crossover Network

● 2 Ohm Stereo Stable

● Anti-Thump Turn-On

● Soft Turn On / Off

● Adjustable High & Low Level Inputs

● RCA Line Low Level Input

● Power Protection Circuitry

● Marine Grade Bluetooth Flush Mounted Controller

● S/N Ratio: > 95 dB

● @10w Output Power/T.H.D: 0.13%

● Channel Separation: > 65 dB

● Frequency Response: 10 – 40K Hz

● Fuse: 15 A

● Dimensions: 6.30”(L) x 3.54” (W) x 1.97”(H)

Accessories:

● iPhone / Android Phone / Waterproof 3.5mm Stereo to RCA Adaptor

● Set of DC 12 Volt Connection Cables Included

●Sold as: Unit

What is included?

When first unpacking your new marine amplifier, Please check

first that the package contains all of the items below. If something

is missing, contact the store where you purchased the product.

One Piece 2 Channel Marine Power Amplifier

One Piece iPhone / Android Phone Waterproof 3.5mm Stereo

One Piece Marine Grade Bluetooth Flush Mounted Controller

PLMRMBT5B / PLMRMBT5S

PLMRMBT7B / PLMRMBT7S

to RCA Adaptor

One Piece 4 Channel Marine Power Amplifier

One Piece iPhone / Android Phone Waterproof 3.5mm Stereo

One Piece Marine Grade Bluetooth Flush Mounted Controller

to RCA Adaptor

Features:

Don’t misuse the level control!

Do not mistake the input level control for a volume control! It is designed

ONLY to match the output level of your audio source to the input level of

your amplifier.

Do not adjust this input level to maximum unless your input level requires it.

Ignoring these instructions will result in an input overload to the amplifier,

and excessive audio distortion. It can also cause the protection circuit to

engage.

Before making or breaking power connections in your system, disconnect the

marine vessel battery.

Confirm that your head

unit or other equipment is turned

off while connecting the input jacks and speaker terminals.

If you need to replace the power fuse, replace it only with a fuse identical to that

supplied with the amplifier, Using a fuse of a different type or rating may result

in damage to your audio system or your amplifier which is not covered by the

manufacturer ’s warranty

Installation precautions

Before you drill or cut any holes, investigate your vessel’s layout very carefully.

Take special care when you work near the gas tank, fuel lines, hydraulic lines

and electrical wiring.

Never operate the amplifier when it is unmouned. Attach all audio system

components securely to prevent damage, especially in an accident.

Do not mount this amplifier when wire connections are unprotected. in a

pinched condition, in contact with any metal surfaces in your marine vessel,

or likely to be damaged by nearby objects.

Controls, Input and Output Cables:

The switches and gain settings are located behind a watertight plug, which

also lights up when the amplifier is on. Be sure to replace the plug when

finished with adjustments

The INPUT LEVEL switch selects the input sensitivity of the amplifier. If

you are connecting to a LINE level source (typically any RCA type

connection) then the switch should be in the LINE (out) position. When

connecting to loudspeaker outputs or headphone or high level sources

then set the switch to the SPEAKER (in) position.

The POLARITY switch allows the user to optimize bass performance in

the case that there are more than 1 set of loudspeakers producing bass

in the system. Play some music with strong bass content and listen with

the switch alternately in the NORMAL and REVERSE position until it can

be determined with setting results in more pleasing bass response. If

in doubt, or if any interaction with other speakers is unlikely, then leave

the switch in the NORMAL position.

The GAIN control adjusts the overall level of the amplifier. When using

the amplifier without volume control the level should beset to achieve a

balance with other loudspeakers in the system. As a rule, keep the gain

setting as low as possible while still insuring that thesystem will reach

full output power. When using the system with external volume control,

set the external Volume Control to FULL (clockwise) and adjust the gain

on the amplifier until full output power is reached. Full output power level

can be determined by turning the gain control clockwise until the actual

volume does not increase any more.

dB GAIN

MIN MAX

SPEAKER

LINE NORMAL

REVERSE GAIN

2 3 415

INPUT Stereo RCA audio input for connecting other audio devices

BLUETOOTH CONTROL Plug for the Marine Grade Bluetooth Flush

Mounted Controller. When installed, this control will turn off the Amplifier

when turned all the way down.

Power and Speaker Wiring

4-8 ohm speakers

wire color Description

Red

Black

Blue

White

White/Black

Gray

Gray/Black

Battery (+), 12dc

Battery (-), Ground

Remote Turn On, 12vdc = ON

CH1 (+)

CH1 (-)

CH2 (+)

CH2 (-)

WHITE

GRAY

GRAY/BLACK

WHITE/BLACK

Accessory switch

BATTERY

BLUEBLACK RED

Two Channel Marine Power Amplifier

Power and Speaker Wiring

wire color Description

Red

Black

Blue

White

White/Black

Gray

Gray/Black

Battery (+), 12dc

Battery (-), Ground

Remote Turn On, 12vdc = ON

CH1 (+)

CH1 (-)

CH2 (+)

CH2 (-)

Green

Green/Black

Purple

Purple/Black

CH3 (+)

CH3 (-)

CH4 (+)

CH4 (-)

WHITE

WHITE/BLACK

GRAY

GRAY/BLACK

GREEN

PURPLE

PURPLE/BLACK

GREEN/BLACK

BATTERY

BLACK

RED

Accessory switch

BLUE

4-8 ohm speakers

Four Channel Marine Power Amplifier

Bluetooth Pairing and Connection:

1. Connect Bluetooth controller box to your device

2. Press and Hold for three seconds until power indicator lights (red)

3. The system will automatically go into pairing mode

The power indicator will turn red for about 7 seconds and then

alternating red and blue (Bluetooth blue Power red)

Please be sure that Bluetooth is turned on your device Select PLMRMB

Audio on your device to connect Bluetooth controller (if the

4. When the device is out of Bluetooth range, Bluetooth will be

disconnected automatically and automatically reconnect when

detected in range again. (If not please just repeat steps 1 and 2)

5. When Bluetooth is disconnected or the 3.5mm AUX Input is

plugged in, the power indicator will glow red.

Playing Music:

1. Press to start or pause the music

2. Press shortly for next track

3. Press shortly for previous track

4. Press VOL+ shortly for volume up

5. Press VOL- shortly for volume down

PLMRMBTxx

VOL

Play / Pause

Press Hold = On/Off

Previous Song

Volume Down

Next Song

Volume Up

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pyle Verstärker Handbücher

Pyle

Pyle PWMA1003BT Bedienungsanleitung

Pyle

Pyle P1002AI Bedienungsanleitung

Pyle

Pyle PDA6BU Bedienungsanleitung

Pyle

Pyle PHE1AW Bedienungsanleitung

Pyle

Pyle PTA1000 Bedienungsanleitung

Pyle

Pyle PMX401 Bedienungsanleitung

Pyle

Pyle PTA24BT Bedienungsanleitung

Pyle

Pyle PCM60A Bedienungsanleitung

Pyle

Pyle PEXA8500 Bedienungsanleitung

Pyle

Pyle PT8000CH Bedienungsanleitung

Pyle

Pyle PFA320BT Bedienungsanleitung

Pyle

Pyle PWMA120BM Bedienungsanleitung

Pyle

Pyle PMSA20 Bedienungsanleitung

Pyle

Pyle PDA9HBU Bedienungsanleitung

Pyle

Pyle Hydra PLMRMP2A Bedienungsanleitung

Pyle

Pyle PLBA330FRD Bedienungsanleitung

Pyle

Pyle PD1000BT Bedienungsanleitung

Pyle

Pyle PD1000BT Bedienungsanleitung

Pyle

Pyle PT8000CH Bedienungsanleitung

Pyle

Pyle PWMA5000BA Bedienungsanleitung

Pyle

Pyle PCM20A Bedienungsanleitung

Pyle

Pyle PDA46BT Bedienungsanleitung

Pyle

Pyle PUKTEAK74 Bedienungsanleitung

Pyle

Pyle PWMAB250BK Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung

Phonic

Phonic XP 3000 Bedienungsanleitung