Pyle View PLTDN71 Bedienungsanleitung
Single DIN Motorized 7" TFT Monitor DVD/AM/FM Receiver/TV-Tuner www.pyleaudio.com
PLTDN71
Contents
Safety Precautions....................................................2
1
General Features........................................................5
Open/Close
Source/Power
Mute
N/P
PBC
Eject
TFT-LCD adjustment
play/pause
Display position adjustment
TV tuner
CD changer
How to set clock
Volume setting
Bass setting
Treble setting
Balance setting
Fader setting
Remote Control..................................................11
Loading and Replacing the battery
Basic operation
Electric Connection...................................................3
Receiption collection
Speaker collection
Installation.................................................................4
Install the unit
Remove the unit
Specifications....................................................16
Trouble Shooting................................................17
Radio Operation.................................................10
Band
Band tuner
AS/PS
Speaker setting............................................................9
Accessories......................................................15
2
CAUTION
Safety precautions
Be sure the unit is connected to a 12V
DC power with a Negative Ground.
Do not install the unit in places where
it is exposed to direct sunlight,high heat
or humidity,water splash or dust.
To change fuse,please use the same
one in specification and capacity.
When changing fuse,please do it
after pulling down power wires to avoid
short circuit.
Do not place anything on the display
when then panel is tilted.
If the unit seems not work properly press
the reset button to reset the memory of the
unit.
Do not operate when driving.
Be sure to store the liquid crystal panel
inside the main unit when parking the car
outdoors for long time.
To prevent electric,etc,Please do not
let
If you smell or see smoke,turn off the
power immediately and consult our dealer.
Be careful not to drop or shock the unit
strongly.
Do not touch the liquid crystal to avoid the
life hurt.If the clothes is stained with it,Please
clean it immediately by soap.
the metal goods(silver,coin,tools..)fall into
the installation.
In extremely cold weather, the display
movement may slow down and the display
may darken, but this is not a malfunction.
Then display will work normally when the
temperature increases.
To prevent damage to the machine,
take the following precautions:
WARNING
To prevent injury or fire,Please
take the precautions:following
SRC
ADJ
OPEN/CLOSE
MUT
APS
BAND
MENU
RESET
RESET
ON/OFF
Electric Connection
3
Electric Connection
Ignition key
sw tchi
Car fuse box
(main fuse)
Connect control for antenna
or remote control for amplifier (Blue)
ACC wire (Red)
Battery wire (Yellow)
Car fuse box
Ground wire(Black) (To car chassis)
CAR ANTENNA
1
2
To front left speaker
White Black/
White
Gray/Black
Gray
Green Black/
Green
WHITE LINE OUT F L
AUX LEFT IN
2
RED LINE OUT F R
AUX RIGHT IN
VIDEO IN
VIDEO OUT
WHITE LINE OUT R L
RED LINE OUT R R
CD CHANGER
1
TV ANTENNA PLUG
Brake detecting wire (Gray)
Light wire( )Orange
Purple
Battery Purple/Black
To front right speaker
To rear left speaker
To speakerrear right
SUB
Detecting wire for back a car (Purple)
BACK CAR VIDEO IN
4
Before installing the receiver permanently, fit it in the approximate place in your car ,and connect the
equipment according to the speakers and electrical connections. When
your system is operated properly,(preferably with the
car engine running), follow the instructions
for permanent installation
of your system.
1) Adapter
(not supplied)
2)Bend over tabs
of half sleeve
(supplied)
3)Support strap
(supplied)
Half sleeve
(supplied)
4) Two wrenches for releasing
the unit (supplied)
INSTALL THE UNIT
1)Install half sleeve, can be with or
without adapter. It will fit better
with adapter.
2)Bend over some tabs to secure the
half sleeve inside of dash.
3) Support strap to be strutted under
dash, secure this strip to avoid skipping
of disc.
Insert removal wrench into the small
gap on the right side of the unit and pull
the unit slightly out on the same side,
then release the wrench. Repeat the
same action for the left side. By now,
you can remove the unit and unplug
the wires connector.
REMOVE THE UNIT
Installation
SRC
ADJ
OPEN/CLOSE
MUT
APS
BAND
MENU
RESET
5
General Features
MUTE
APS/PBC
SEL/VOL EJECT PLAY/PAUSE
OPEN/CLOSE
Display Open/Close
OPEN:
Press[ ]( )OPEN/CLOSE
CLOSE:
Press[ ]( )again.OPEN/CLOSE
Notes:
If the unit stops halfway,press[ ]again and draw it all the
way in.
Opening/closing the display can also be done when the
power is off.
WARNING
Do not touch the unit while the display is moving. Inserting
hands,fingers or foreign objects into the unit can cause
injuries and damage to the unit.
Keep babies and children away from the unit.
SOURCE/POWER
Turn your car`s ignition key to ACC or ON position.
ON:
On being off,please short press[SRC]and it can be
turned on,and still keep the showing angle when it
was turned off last time.
On being open,please long press[SRC] then it can
be turned off.
On being open,please short press [SRC] then can
transit among the following status.
SRC/PWR
N/P RADIO
CDC
CDC/AUX IN can be skipped when no external devices are
connected.
TV
AUX IN
DVD
OFF:
SRC:
ON/OFF
6
Mute
MUTE ON
Press the [MUT]button
MUTE OFF
Press the [MUT]button again.
General Features
Eject
Out
Press the [ ]button to eject the disc out of the unit .
N/P
PBC
Under the playing, press [BAND] and can transit among
PAL/AUTO/NTSC
Under the songs, press [APS] then show song content of
disc and stop the playing song. If press again then com
back the playing status.
SRC
ADJ
OPEN/CLOSE
MUT
APS
BAND
MENU
RESET
SOURCE ADJ ANGLE
Play/Pause
If with DISC in unit,Press the [ ]to pause music.
Press the [ ]button again , come back DISC playing.
If a disc is loaded,a sector sign will show on the display.
7 inches wide LCD
display
SRC
ADJ
OPEN/CLOSE
MUT
APS
BAND
MENU
RESET
SRC
ADJ
OPEN/CLOSE
General Features
Display position Adjustment
CAUTION
For smooth adjustment,make sure to first return the lateral angle to
the neutral position and then adjust the tilt angle.
Avoid physical shock on the display.
Tilt angle
Press [ADJ] button ,it can adjust screen
angle gradationally.The unit has 4 grades
for adjustment ,and each time you
press the button ,it can move one
grade down along indication; it can
resume up along indication.
AS/PS
AS/PS ADJUSTADJUST
AS/PSAS/PS ADJUSTADJUST
AS/PSAS/PS ADJUSTADJUST
ADJ ANGLE
Do not place any object on
thedisplay unit,or subject it
to undue force.
Do not move the display
forcibly.
The monitor movable range
may be limited by a type of
car,a position where the
display is mounted,etc.
7
TFT-LCD adjustment
Press the [MENU] button,it will show as follows:
Press and to remote cursor up and down,and press
or to adjust.
R
GB
15
In radio mode ,16:9 don t operation.
PIC SEL
STANDARD
SOFT
BRIGHTNESS
USER
USER
MODE
15
15
16:9
MUT
APS
BAND
IN-DASH 7INCH WIDE COLOR LCD TV WITH DVD RECEIVER
MENU
RESET
SOURCE ADJ ANGLE
SRC
ADJ
OPEN/CLOSE
MUT
APS
BAND
MENU
RESET
General Features
SOURCE
CD Changer
Press [MODE] to change to CD/Video CD Change mode and
playback starts.
CD Change/Video CD Change Mode
Disc Selection
(Only select sanyo CD Change 10disc or 6disc))
[ ](CHANNEL):Up
[ ](CHANNEL):Down
How to set clock
Press [CLOCK] button can show clock.
Long press [CLOCK] button,when hour hand twinkling,
press VOL- or VOL+ to adjust hour.then Press [CLOCK]
button,when minute hand twinkling,press VOL- or VOL+ to
adjust minute.
8
TV Tuner
Preparation:
To receiver TV broadcasts,install the TV antenna.
For receiving TV broadcasts, stop your car where there is no
obstacle to broadcast reception around.
TV mode
Press [MODE] to change to TV mode.
Channel Selection
[ ](CHANNEL):Up
[ ](CHANNEL):Down
Channel Search
Long press the [APS] button and automatically search and keep
TV station
Direct Channel Selection
Enter a channel number by pressing [0]to[9].
Example:Channel Number 17
press [1]and [7].
(Only for remote control)
8
Transit the channels
Under TV mode, press [N/P] button to switch the TV audio style.
N/P
ON/OFF
(Page 14)
9
Speaker setting
Speaker mode
CLAS
ROCK
NORM
Once
FLAT
Third
Fourth
POP
Fifth
Twice
VOL set mode
BAS set mode
TRE set mode
Press SEL/VOL button third,display will show TRE
on,then rotate the button to adjust treble level up/down
in different direction.
VOL BAS
FAD
TRE
BAL
EQ
Press SEL/VOL button once,display will show VOL
on,then rotate the button in clockwise direction to
increase volume level;rotate the button in anticlockwise
direction todecrease volume level.
Press SEL/VOL button twice,display will show BAS
on,then rotate the button to adjust bass level up/down
in different direction.
FAD set mode
Press SEL/VOL button fifth, display will show FAD
on,then rotate the button to adjust FAD level up/down
in different direction.
BAL set mode
Press SEL/VOL button fourth, display will show BAL
on,then rotate the button to adjust BAL level up/down
in different direction.
EQ set mode
Press SEL/VOL button sixth, display will show EQ
on,can be select sound effect:
Inhaltsverzeichnis
Andere Pyle Autoradiosystem Handbücher
Pyle
Pyle PLDCP6 Bedienungsanleitung
Pyle
Pyle PLMR14W Bedienungsanleitung
Pyle
Pyle Plus PLCD72MP Bedienungsanleitung
Pyle
Pyle PLCD27 Bedienungsanleitung
Pyle
Pyle 189 Kurzanleitung
Pyle
Pyle PL97M4 Bedienungsanleitung
Pyle
Pyle PLDTN68 Bedienungsanleitung
Pyle
Pyle PLCD5MRBTS Bedienungsanleitung
Pyle
Pyle PLD182 Bedienungsanleitung
Pyle
Pyle PLD57MU Bedienungsanleitung
Pyle
Pyle PLDVD138 Bedienungsanleitung
Pyle
Pyle PBT92 Bedienungsanleitung
Pyle
Pyle PLCDCS220MP Bedienungsanleitung
Pyle
Pyle PLDVD132 Bedienungsanleitung
Pyle
Pyle View PLTDN70 Bedienungsanleitung
Pyle
Pyle PLCD65WXMU Bedienungsanleitung
Pyle
Pyle PYLE PLVSMR7 Bedienungsanleitung
Pyle
Pyle PLR15MUA Bedienungsanleitung
Pyle
Pyle PBT9 Bedienungsanleitung
Pyle
Pyle PLCD56MP Bedienungsanleitung
