Pyle PLVW8M Bedienungsanleitung

OWNER'S MANUAL

TFT MONITOR

PLVW8M

www.pyleaudio.com

INSTALLATION

The monitor (Fig.1) can be installed on the bracket (Fig.2). You can mount the unit

according to the following steps.

1. Insert the position plate on the bracket into the slot 1 on the mounting bracket. Then

slide the position plate upward to the slot 2 and select the proper location. Then

rotate the screw cover 2 to fix the monitor on the bracket.

2. When mounting the monitor on the bracket, you can release the screw cover 1 to

turn the rotation top upward or downward to find a good viewing angle, then rotate

the screw cover 1 to fix the rotation top.

3. The monitor can be rotated leftward or rightward by rotating the rotation base.

4. On the bottom of the base, there is a layer of magic tape. When you remove the

protective paper, you can stick the unit to the desired location of your vehicle system.

Be sure that the mounting surface is clear and dry.

Mounting Bracket

Slot 2

Monitor

Slot 1

Fig.1

Screw Cover 2

Rotation Top

Rotation Base

Screw Cover 1

Position

Plate

Base

Fig2.

To other DVD/VCD system

REMOTE

AUDIO R IN(RED)

VIDEO IN(YELLOW)

AUDIO L IN(WHITE)

S-VIDEOIN

(YELLOW) (WHITE)(RED)

ELECTRICAL CONNECTION

RED

BLACK

DC PLUG

Ground wire

Tothe +12V

power terminal

410 87652111311

1. (Power Button)

2. Power Indicator Light

3. IR (Remote Sensor)

4. MENU

5. MUTE

6. VOLUME+

7. VOLUME-

8. PICTURE+

9. PICTURE-

10. 8 inch color TFT LCD

11. Speakers

12. Volume Knob

13. Jacks for Earphone

14. REMOTE Jack

15. DC 12V Input Jack

16. S-VIDEO Jack

17. AV IN Jacks

LOCATION AND FUNCTION OF KEYS

Bright 32

Contrast 32

Color 32

Tint 32

1. (Power)

Press button (1) to turn on/off the unit.

2. POWER INDICATOR LIGHT

When the system is on, the indicator light (2) will be illuminated.

3. REMOTE SENSOR

For option, the monitor can be supplied with the remote control according to the

user's need. Through the remote sensor IR (3), you can use the remote control to

execute TV operation conveniently.

If there is a VIDEO/AUDIO system connecting to the monitor through the REMOTE

jack (14) and AV INPUT jacks (17), through the remote sensor IR (3), you can use

the corresponding remote control supplied with the VIDEO/AUDIO system to control

the VIDEO/AUDIO system.

4. MENU

Press the MENU button (4) to show the menu on the display (10), repeatedly press

MENU button (4) to select among Bright, Contrast, Color, Tint (For the unit with

NTSC system) items.

LOCATION AND FUNCTION OF KEYS

Press PICTURE+ button (8) or PICTURE- button (9) to increase or decrease the

level of the corresponding item.

5. MUTE

Press MUTE button (5) to mute the sound. Press the button again, the screen will

display the AUDIO level setting value of the TV unit for several seconds. Then you

can adjust the volume level by VOLUME+ (6) and VOLUME- (7) buttons.

6. VOLUME+

Press the VOLUME+ button (6) to choose channel upward.

7. VOLUME-

Press the VOLUME- button (7) to choose channel downward.

8. PICTURE+

Press the PICTURE+ button (8) to increase the volume level of the speaker.

9. PICTURE-

Press the PICTURE- button (9) to decrease the volume level of the speaker.

(For the unit with NTSCsystem):

10. TFT LIQUID CRYSTAL DISPLAY

The 8 inch TFT color LCD (10) can show the current state of the unit.

11. SPEAKER

There are two speaks (11) on the front of the monitor. The sound can be sent

from the speakers if the unit isn't connected with earphone.

12. EARPHONE VOLUME CONTROL KNOB

Slide the knob (12) to change the volume of the earphone.

13. JACKS FOR EARPHONE

There are two jacks (13) for earphone. You can connect earphone to any one of

the jacks to receive sound signal.

14. REMOTE

Through the REMOTE jack (14), connect other VIDEO/AUDIO system to the

monitor. Then you can control the VIDEO/AUDIO system by pointing the remote

control directly to the remote sensor IR (3).

15. DC 12V INPUT JACK

Through this jack (15), provide DC 12V power supply to the unit.

16. S-VIDEO JACK

The jack (16) is used for S-VIDEO input.

17. AV INPUT JACK

The group of jacks (17) is used for VIDEO in, AUDIO R in and AUDIO L in.

LOCATION AND FUNCTION OF KEYS

TROUBLE SHOOTING

Before going through the checklist, check wiring connection. If any of the problems

persist after checklist has been made, consult your nearest service dealer.

NO POWER

Check if the power button on the front of the monitor is set to on.

Check if the wires of DC power plug are properly connected.

Check if there is power at the power supply outlet.

THE PICTURE IS OVER DARK, OVER BRIGHT OR HAS NO COLOR:

Press MENU button on the front of the unit, then press PICTURE+ button or

PICTURE- button to increase or decrease the level of the corresponding item

(BRIGHT, CONTRAST, COLOR or TINT) to proper value, then you can get an

optimum picture effect.

NO SOUND

Check if the audio connections are properly connected.

Check if the volume is minimum, and press the VOLUME+ button to increase the

volume level.

CAN'T RECEIVE TV SIGNAL OR THE PICTURE QUALITY IS POOR IN TV MODE:

Please confirm if the antenna is connected to the antenna socket of the unit.

Check if you have pulled out the antenna.

Perhaps the signal of your position is too weak, and it can't receive any TV signal

at all.

BUTTONS DO NOT WORK

Turn the unit off and on with the power button on the front of the unit.

BRACKET 3 (BKT3)

INSTALLATION HARDWARE

(1) ASSY (Rotate combined bracket with Base A..................................................1

(2) Base B................................................................................................................ 1

(3) Plastic tube ( 13mm) ........................................................................................ 2

(4) Screw ( 3x10)..................................................................................................... 4

(5) Clip screw ..............................................................................................1

(6)

............................................................................................................

(1)

(2) (4)

(6)

(3)

(7)

(5)

(8)

(10)

(a) (b)

(9)

(7)

Fastener

..............................................................................................................

(8)

Fix bolt

......................................................................................

(9) Tray

.....................................................................................................................

(10)sponge (a)

.........................................................................................................

(10)sponge (b)

.........................................................................................................

(11) (12) (13) (14)

Washer (a) (3mm thick)

(11)Hex nut

.........................................................................................................

(12)Bolt

.....................................................................................................................

(13)

......................................................................................

Washer (b) (7mm thick)

(14)Plastic tube ( 16mm) ........................................................................................ 2

INSTALLATION

1. Press the switch under the headrest of the car seat and pull out the headrest.

2. Combine the base B (2) and the base A with steel ripple pipe (1), then place them

on the poles of the removed headrest to select proper hole position to install the

base.

3. Remove the Base from the headrest and loosen the two screws by using the

screwdriver, then according to the size of the poles, place the two plastic tubes

( 13mm) (3) or plastic tubes ( 16mm) (14) on the holes that you just selected,

then adjust them to proper position as shown in diagram below.

Headrest

Switch

(3) Plastic tube( 13mm)

or (14)Plastic tube( 16mm)

(1)

Steel ripple pipe

(2)

Inhaltsverzeichnis

Andere Pyle Auto-Videosystem Handbücher

Pyle

Pyle PLDVSL7 Bedienungsanleitung

Pyle

Pyle PLRD125 Bedienungsanleitung

Pyle

Pyle PLVSR10GR Bedienungsanleitung

Pyle

Pyle PLDHR926KT Bedienungsanleitung

Pyle

Pyle PLVSHR6 Bedienungsanleitung

Pyle

Pyle PLRDVD86 Bedienungsanleitung

Pyle

Pyle PLVIN70 Bedienungsanleitung

Pyle

Pyle PYLE View Series PLVWR5600 Bedienungsanleitung

Pyle

Pyle PLED4U7 Handbuch

Pyle

Pyle PLD71MU Bedienungsanleitung

Pyle

Pyle PYLE View Series PLVWR7300 Bedienungsanleitung

Pyle

Pyle PLVHR75 Bedienungsanleitung

Pyle

Pyle Chopper PLBASS2.8 Bedienungsanleitung

Pyle

Pyle PLRD143IF Bedienungsanleitung

Pyle

Pyle PLVIN56 Bedienungsanleitung

Pyle

Pyle PL2DN4D Bedienungsanleitung

Pyle

Pyle PLD7HB Bedienungsanleitung

Pyle

Pyle PLDF7IN Bedienungsanleitung

Pyle

Pyle PLDAND110 Bedienungsanleitung

Pyle

Pyle PLTV65R Bedienungsanleitung

Pyle

Pyle PLVWR7200F Bedienungsanleitung

Pyle

Pyle PLDNANDVR695 Bedienungsanleitung

Pyle

Pyle PLTV71 Bedienungsanleitung

Pyle

Pyle PLD89MU Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

PowerAcoustik

PowerAcoustik PTID-5850N Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Kia

Kia MTXM100YPPE Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung