Q-Tech QSR-3920 Series Bedienungsanleitung

INSTALLATION MANUAL

www.qtech.ru

QSR-3920 Series Router Installation

Manual

QSR-3920-08

www.qtech.ru

Without the written approval of the Company, no company or individual is allowed to

extract, reproduce, translate or propagate this Manual, in whole or in part, in whatsoever

manner.

QTECH is the trademark of QTECH LLC. All other trademarks, product marks and trade

names referenced herein are owned by their owners respectively.

This Manual may be subject to changes on account of product upgrade or other causes.

QTECH reserves the right to revise this Manual without any notice. Subject to the laws

and regulations, QTECH LLC shall, under no circumstance, be responsible for any

accident, negligence, breach of contract, defamation and infringement of copyright or

intellectual property right incurred by using the related content of this Product Manual or

this website, assume any liabilities for damage with respect to any special, incidental,

indirect or secondary losses and any losses on profit, data, business reputation or

expected economy so caused or bear any legal liabilities so arisen.

Safety Statement

Important! Please read the product safety and compatibility information before energizing

and enabling the product.

Environmental Statement

This product complies with the design requirements in terms of environmental protection

and shall be stored, used and disposed in accordance with the related national laws and

regulations.

www.qtech.ru

PREFACE

Manual Introduction

This manual introduces the appearance, hardware, and installation preparation and method of

the QSR-3920 series router, as well as its basic use and daily maintenance in terms of

energization & operation, troubleshooting and equipment maintenance.

Product Version

This manual is applicable to the product versions as below.

Product name

Product Version

QSR-3920 series router

QSR-3920-08(V1)

Target Users

The major target users of this Manual are:

Hardware Installation Engineer

Debugging Engineer

Site Maintenance Engineer

System Maintenance Engineer

Convention

Convention of screen output formats

Format

Description

Screen print

Screen output

Keywords of

Screen print

Key information of screen output (red part)

Convention of icons and signs

Format

Description

Note:

Supplement to or emphasis on the aforesaid.

www.qtech.ru

Caution:

Matters that need attention while installing or operating the

equipment, which are important for proper installation and

operation.

Warning:

Operations prohibited or required to follow the specified

steps; otherwise, personal injuries or equipment damages are

possible.

Convention of command formats

Format

Description

Bold

Keywords of command line

Italic

Parameters of command line

Brace “{ }”

Options in the brace are compulsory.

Bracket “[ ]”

Options in the bracket are optional.

Angle bracket “<>”

Information in the angle bracket is not displayed.

Square bracket “【

】”

Contents in the square bracket need attention.

Upright slash “|”

A sign to separate the options, with the same meaning as “or”.

Slash “/”

A sign to separate the options, indicating a multi-choice

operation.

For the purpose of this manual, the icons have the definitions as below:

Icons

Description

This icon and its related description generally refer to the

switch.

Product Details

The manual matching with the product is as follows:

Manual

Description

www.qtech.ru

QSR-3920 Series Router

Configuration Manual

Detailed introduction to the methods and steps of

configuring the equipment software functions, with

the typical cases made available for reference.

Technical Support

Technical support hotline: +7 (495) 797-33-11 * 555

Email (feedback): [email protected]

Revision History

The Revision History is the summary of all manual updates. The latest version includes all

previous updates.

Version

Revision date

Description

V1.0

2017-10-10

First issue

V1.1

2018-1-24

Add the contents of QSR-M-3920-3ESP3, QSR-M-

3920-3ESP10

 
www.qtech.ru 
Table of contents 
PREFACE 3 
 ROUTER INTRODUCTION 9 
 QSR-3920-08 Appearance and Hardware 9 
 Introduction to 3ESP Card 10 
 Introduction to MIFC Card 10 
 Introduction to M-3920 Interface Sub Card 11 
 Introduction to MX9 Series Card 12 
 Introduction to Power Module 12 
 AC Power Module 13 
 Air Passage of QSR-3920 Series Router 13 
 QSR-M-3920-FAN Fan Module 14 
 INSTALLATION PREPARATIONS 15 
 Check Router Running Environment 15 
 Safety Precautions 15 
 General Safety 15 
 Electrical Safety 15 
 Static Safety 16 
 Laser Safety 17 
 Installation Tools, Instruments, and Equipment 17 
 Open-Package and Inspection 17 
 ROUTER INSTALLATION 17 
 Install Router 17 
 Install Router to Workbench 18 
 Install Router to Cabinet 18 
 Ground the Router 22 
 Install Interface Sub Card Components (Optional) 24 
 Install USIM Card 24 
 Install 4G Antenna 26 
 (Optional) Install SPD 28 
 Install AC Power SPD 28 
 (Optional) Install Port Lightning Protector 29 
 Install Power Supply 30 
 Installation Preparations 30 

 
www.qtech.ru 
 Install Power Module 31 
 Connect Power Cable 31 
 Installation Preparations 31 
 Connect AC Power Cable 31 
 Check after Installation 32 
 POWER ON AND RUN ROUTER 33 
 Log into Router 33 
 Connect Console Cable 33 
 Set PC HyperTerminal Parameters 34 
 Power on and Start 38 
 Check after Power on 40 
 Access Network 40 
 Access Network via Ethernet Twisted Pair 40 
 Access Network via Fiber 41 
 Hardware Management 44 
 View Software and Hardware Version Information of Router 44 
 View Power Module Status Information 45 
 View System Environment Temperature Information 47 
 View Fan Status Information 47 
 View Swappable Optical Module Information 48 
 TROUBLESHOOTING 50 
 Troubleshooting of Configuration System 50 
 Troubleshooting about no Display on Terminal 50 
 Troubleshooting about Messy Code on Terminal 50 
 Troubleshooting about Fan 50 
 Troubleshooting about Power 51 
 Get Technical Support 51 
 ROUTER MAINTENANCE 53 
 Change Module 53 
 Change Power Module 53 
 3ESP Card 54 
 Change MX9/M-3920 Interface Card 56 
 Change Fan Module 57 
 Change Swappable Optical Module 58 
 De-dust the Router 60 

www.qtech.ru

De-dust the Fan Module 61

De-dust the Board Card 61

De-dust Optical Interface and Pigtail Connector 62

APPENDIX A-1

Installation Manual

1. Router Introduction 9

www.qtech.ru

ROUTER INTRODUCTION

QSR-3920-08 Appearance and Hardware

QSR-3920 series router only has one product model: QSR-3920-08.

QSR-3920-08 router has three kinds of slots: 3ESP, LX9, and MX9. The three

slots are respectively inserted with RM3E-3ESP card, QSR-LX9-M-24GETS

sub card, and MX9 interface card.

3ESP: Server Processing Unit business processing card, responsible for

packet forwarding and control processing. Refer to "Appendix A2

Specifications of 3ESP interface card " for specific specifications

MX9 interface card: including QSR-MX9-M-4GET, QSR-MX9-M-4GEF and

other interface cards. Refer to "Appendix A7 Specifications of MX9

interface card " for specific specifications.

LX9 interface card: include QSR-LX9-M-24GETS interface card.

The dimension of QSR-3920-08 is 442mm × 365mm × 88.6mm (W x D x H). The front appearance

diagram of QSR-3920-08 is shown in Figure 1-1, and the rear appearance diagram is shown Figure

1-2.

Figure 1-1 QSR-3920-08 front appearance

1.Cabinet bracket

2. LX9 interface card slot

3.MX9 interface card slot

4.MIFC card slot

5.Static wrist socket

6.Chassis air vent

Installation Manual

1. Router Introduction 10

www.qtech.ru

Figure 1-2 QSR-3920-08 rear appearance

1. Fan slot

2. Power slot

3.3ESP card slot

4. Grounding stud

Introduction to 3ESP Card

3ESP card is the core of QSR-3920 router, which is responsible for packet forwarding and control

processing. QSR-3920-08 must be configured with only one 3ESP card. QSR-3920-08 supports

three types of 3ESP cards, QSR-M-3920-3ESP3, QSR-M-3920-3ESP5, and QSR-M-3920-3ESP10.

The appearance of QSR-M-3920-3ESP5 card is as follows:

Figure 1-3 QSR-M-3920-3ESP5 appearance

1. Screw

2.Puller

3. Port status indicator

4.Function port

5. Card status indicator

6.Card component area

The 3ESP card of QSR-3920 router supports hot-swap.

Introduction to MIFC Card

MIFC card is the management interface card of QSR-3920 router. The serial port, U disk interface,

DC0 port and system status indicator of the device are all on the card.

Andere Handbücher für QSR-3920 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere q-Tech Netzwerk-Router Handbücher

q-Tech

q-Tech QSR-3920 Series Merkblatt

q-Tech

q-Tech QSW-9010 Bedienungsanleitung

q-Tech

q-Tech QSR-2920 Series Merkblatt

q-Tech

q-Tech QSR-2830 Bedienungsanleitung

q-Tech

q-Tech QSW-2900 Bedienungsanleitung

q-Tech

q-Tech QSW-3900 Bedienungsanleitung

q-Tech

q-Tech SMS Lite 4G Bedienungsanleitung

q-Tech

q-Tech QSR-2920 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

q-Tech QSR-3920 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken