QNAP TVS 82 Seris Gebrauchsanweisung
QNAP Turbo NAS
TVS-X82, TVS-X82T, & TVS-1282T3
Hardware User Manual
© 2017. QNAP Systems, Inc. All Rights Reserved.
2
Thank you for choosing QNAP products! This user manual provides description of the
hardware of the Turbo NAS and relevant guideline of certain functions. Please read carefully
and strictly adhere to the instructions of the manual.
This user manual is applicable to the following Turbo NAS models:
TVS-682-PT-8G, TVS-682-i3-8G, TVS-882-i3-8G, TVS-882-i5-16G,
TVS-882-i5-16G-450W, TVS-1282-i3-8G, TVS-1282-i5-16G, TVS-1282-i7-32G,
TVS-1282-i5-16G-450W, TVS-1282-i7-32G-450W, TVS-682T-i3-8G, TVS-882T-i5-16G,
TVS-1282T-i5-16G, TVS-1282T-i7-32G, TVS-1282T3-i5-16G, TVS-1282T3-i7-32G,
TVS-1282T3-i7-64G
NOTE
•The “Turbo NAS” is hereafter referred to as “NAS”.
•The product you purchased may not support certain functions dedicated to specific
models.
•All features, functionality, and other product specifications are subject to change
without prior notice or obligation.
•Information presented is subject to change without notice.
•No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, mechanical, electronic, photocopying,
recording, or otherwise, without prior written permission of QNAP Systems, Inc.
•QNAP and the QNAP logo are registered trademarks of QNAP Systems, Inc. Other
products and company names mentioned herein may be the trademarks of their
respective companies.
3
DISCLAIMER
In no event shall QNAP Systems, Inc. (QNAP) liability exceed the price paid for the product
from direct, indirect, special, incidental, or consequential damages resulting from the use
of the product, its accompanying software, or its documentation. QNAP makes no warranty
or representation, expressed, implied, or statutory, with respect to its products or the
contents or use of this documentation and all accompanying software, and specifically
disclaims its quality, performance, merchantability, or fitness for any particular purpose.
QNAP reserves the right to revise or update its products, software, or documentation
without obligation to notify any individual or entity.
Note:
1. Back up your system periodically to avoid any potential data loss. QNAP disclaims any
responsibility of all sorts of data loss or recovery.
2. Should you return any components of the NAS package for refund or maintenance,
make sure they are carefully packed for shipping. Any form of damages due to
improper packaging will not be compensated.
4
Regulatory Notice
FCC Notice
The QNAP NAS complies with different FCC compliance classes. Please refer to 0 for details.
Once the class of the device is determined, refer to the following corresponding statement.
=======================================================
FCC Class A Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to
correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP
Systems, Inc. may void the authority granted to the user by the FCC to operate this
equipment.
5
FCC Class B Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/television technician for help.
Modifications: Any modifications made to this device that are not approved by QNAP
Systems, Inc. may void the authority granted to the user by the FCC to operate this
equipment.
CE NOTICE
The QNAP NAS complies with different CE compliance classes. Please refer to Appendix A:
Product Compliance Class for details.
6
SJ/T 11364-2006
本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量
要求。
本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产
品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。
部件名称 有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(CR(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
壳体 O O O O O O
显示 O O O O O O
印刷电路板 O O O O O O
金属螺帽 O O O O O O
电缆组装 O O O O O O
风扇组装 O O O O O O
电力供应组
装
O O O O O O
电池 O O O O O O
O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以
下。
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量
要求。
7
Symbols in this document
Warning
This icon indicates the instructions must be strictly followed.
Failure to do so could result in injury to human body or death.
Caution
This icon indicates the action may lead to disk clearance or loss OR
failure to follow the instructions could result in data damage, disk
damage, or product damage.
8
Table of Contents
Table of Contents ...............................................................................................8
Safety Warnings.................................................................................................9
Chapter 1. CPU and Memory Specifications ...................................................10
Chapter 2. Power Button and Reset Button Behavior ....................................17
Chapter 3. USB One Touch Copy....................................................................18
Chapter 4. LED and Alarm Buzzer Specifications ...........................................19
Chapter 5. Beep alarm: All NAS models.........................................................21
Chapter 6. Hot-swap Hard Drives ..................................................................22
6.1 INSTALL HARD DRIVES ............................................................................... 24
6.2 INSTALL M.2 SSDS .................................................................................. 25
6.3 HOT-SWAP HARD DRIVES ............................................................................ 27
Chapter 7. Upgrade Memory on QNAP NAS (RAM Module Installation)..........28
Chapter 8. Expansion Card Installation .........................................................32
Chapter 9. RAID Recovery.............................................................................38
Technical Support ............................................................................................40
Appendix A: Product Compliance Class.............................................................41
GNU GENERAL PUBLIC LICENSE .......................................................................42
9
Safety Warnings
1. The NAS can operate normally in the temperature of 0ºC–40ºC (32ºF -104ºF) and
relative humidity of 5%–95%. Please make sure the environment is well-ventilated.
2. The power cord and devices connected to the NAS must provide correct supply voltage
(100W, 90–264V).
3. Do not place the NAS in direct sunlight or near chemicals. Make sure the temperature
and humidity of the environment are in optimized level.
4. Unplug the power cord and all connected cables before cleaning. Wipe the NAS with a
dry towel. Do not use chemical or aerosol to clean the NAS.
5. Do not place any objects on the NAS for the server’s normal operation and to avoid
overheat.
6. Use the flat head screws in the product package to lock the hard disks in the NAS when
installing hard disks for proper operation.
7. Do not place the NAS near any liquid.
8. Do not place the NAS on any uneven surface to avoid falling off and damage.
9. Make sure the voltage is correct in the location where the NAS is installed. Contact the
distributor or the local power supply company for the information.
10. Do not place any object on the power cord.
11. Do not attempt to repair the NAS in any occasions. Improper disassembly of the
product may expose the users to electric shock or other risks. For any enquiries,
please contact the distributor.
12. The chassis NAS models should only be installed in the server room and maintained by
the authorized server manager or IT administrator. The server room is locked by key
or keycard access and only certified staff is allowed to enter the server room.
Warning:
•Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
•Do NOT touch the fan inside the system to avoid serious injuries.
10
Chapter 1. CPU and Memory Specifications
Caution: Modifying the hardware, software, or firmware of the QNAP products will
void the warranty. QNAP is not responsible for any form of damage or loss of data caused
by modding the QNAP products. Users should bear their own risks of all sorts of possible
data loss or system instabilities due to changing the hardware parts, modifying the default
system firmware or installing any unauthorized third party applications on QNAP products.
System TVS-682-PT-8G TVS-682-i3-8G
CPU
Intel® Pentium® Processor
G4400
Dual-core 3.30 GHz
Intel® Core™ i3-6100
Processor
Dual-core 3.70 GHz
Memory 8GB DDR4 2133 RAM
(Expandable up to 64GB)
Flash 512MB (USB DOM)
CPU
replaceable? No
Memory
replaceable?
✔ (Compatible with DDR4 RAM)
U-DIMM slots 4
Hard drive
slots
6:
2 x 2.5” SSD;
4 x 2.5”/3.5” hard drive or SSD
M.2 SSD slots
2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD
USB ports
5:
1 x USB 3.0 port (Front);
4 x USB 3.0 port (Rear)
PCIe slots
2:
1 x PCIe Gen3 x16;
1 x PCIe Gen3 x4
Gigabit
network ports
4
HDMI outputs
3
IR sensor ✔ (QNAP remote control: RM-IR002)
Power output 250W
Dieses Handbuch passt für folgende Modelle
19
Inhaltsverzeichnis
Andere QNAP Lagerung Handbücher
QNAP
QNAP TS-62 Series Bedienungsanleitung
QNAP
QNAP TVS-73e Series Bedienungsanleitung
QNAP
QNAP TS-431X Bedienungsanleitung
QNAP
QNAP TS-1273U Bedienungsanleitung
QNAP
QNAP TDS-h2489FU Bedienungsanleitung
QNAP
QNAP TS-h1090FU Bedienungsanleitung
QNAP
QNAP TS 77XU Series Bedienungsanleitung
QNAP
QNAP TVS-h 74t Series Bedienungsanleitung
QNAP
QNAP TS-h1886XU-RP-R2 Bedienungsanleitung
QNAP
QNAP TS-251A-2G Bedienungsanleitung
QNAP
QNAP TS-664-8G Bedienungsanleitung
QNAP
QNAP TES-1885U-D1531-32G Gebrauchsanweisung
QNAP
QNAP ES NAS Series Technisches Datenblatt
QNAP
QNAP TS- 62 Series Bedienungsanleitung
QNAP
QNAP TS-H1277AXU-RP-R5-16G Bedienungsanleitung
QNAP
QNAP TS-h1677XU-RP Bedienungsanleitung
QNAP
QNAP TS-110 Bedienungsanleitung
QNAP
QNAP TS-73 Series Bedienungsanleitung
QNAP
QNAP TS-453D-4G-16TB Bedienungsanleitung
QNAP
QNAP TVS-h 88X Series Bedienungsanleitung
Beliebte Lagerung Handbücher anderer Marken
LaCie
LaCie RUGGED MINI Bedienungsanleitung
Thunderbolt
Thunderbolt 600 Bedienungsanleitung
Panasonic
Panasonic LB-DH8 series Handbuch
Intel
Intel RAID High Availability Bedienungsanleitung
LaCie
LaCie 12big Thunderbolt 3 Bedienungsanleitung
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung
Dell
Dell PowerVault MD3600f Series Bedienungsanleitung