Qomo QIT 300 Bedienungsanleitung

QIT

300 & 500

User Manual

Table of Contents

Chapter 1. What is in the box...........................................................2

Chapter 2. System Requirements....................................................4

Chapter 3. Product Introduction......................................................4

Chapter 4. Setup................................................................................5

Chapter 5. Electromagnetic Pen......................................................6

Chapter 6. Features...........................................................................7

Chapter 7. Software Operation Basics............................................8

Chapter 1. What is in the box

Electromagnetic LCD Writing Panel (1)

USB Cable (1)

VGA Cable (QIT300) or Built -in (QIT500)

Power Cord (QIT300) or Power Brick (QIT500)

AAA Battery for Pen (1)

Electromagnetic Pen (1)

Pen Holder (QIT500)

Installation CD (1)

Owner’s Manual (1)

If any items are missing or damaged, contact the dealer where you purchased

the panel immediately.

Chapter 2. System Requirements

Please check the contents of the box to make sure that the following parts are

included.

Software:

Installation CD-ROM, it contains application Software setup and driver setup.

Hardware:

Electromagnetic LCD Writing Panel (1)

Electromagnetic Pen (1)

Power Cord (1)

VGA Cable (1)

USB Cable (1)

Additional Hardware:

If the user uses a single VGA output display card and wants to connect the LCD

Writing Panel system to an external projection device, the following additional

components are required.

VGA Distribution Amplifier (1) (not supplied by QIT-500)

Additional VGA cables (2) (not supplied by QIT-500)

System Requirements:

Operation System

Windows 98SE, Windows Me, Windows 2000,

Windows XP

CPU

Pentium III 500MHz, Pentium III 1GHz as recommended

Peripherals

CD-ROM Drive, Sound Card, and Microphone

RAM

Minimum 128MB，256MB as recommended

Display Card

Support 1024 x 768 (16-bit true color),

Data Port

USB ports (2)

Note: The LCD Writing Panel is only designed for 1024x768 or1440x900

resolution depending on your model. Please make sure that your display

resolution is set to 1024x768 or1440x900 with 16-bit or 32-bit color depth.

Chapter 3. Product Introduction

The LCD Writing Panel is a breakthrough presentation product that incorporates

the most advanced writing and demonstration technology to make presentation

more powerful and interactive.

Central to the LCD Writing Panel system is the Electromagnetic LCD Writing

Panel. Electromagnetic pen can be used to write on the surface of the panel and

the written contents can be seen on the monitor immediately. All writings,

drawings, predefined templates and the PC application screen are projected in

real time to the output monitor or screen, making the LCD Writing Panel system a

revolutionary and powerful presentation tool.

The LCD Writing Panel seamlessly works with projector, plasma screen, TV and

other equipment to provide more convenient, interactive and effective

presentation. It is perfect for school auditoriums, conference rooms, trade shows,

symposiums and lecture halls.

The monitor of the LCD Writing Panel has an internal pressure sensor that reads

the pressure from the user’s pen. When used as a brush, the thickness of the

pen stroke shown on the monitor is in correspondence with the pressure level

placed on the monitor. The penmanship is reproduced in a digital format and it

makes the user’s writing looks smooth and even.

Chapter 4. Setup

A. Connection Chart

B. Setup steps

STEP 1:

Installing the driver and application software.

1) Insert the Installation CD into your computer’s CD-

ROM drive, a dialog-box appears

2) Double-click “Writing panel software” for start installation, follow dialog-

box messages and click “Next” to finish installation.

3) Double-click “Writing panel Driver” for start installation, follow dialog-box

messages and click “Next” to finish installation..

4) Double-click “Microsoft DirectX9.0” for start installation, follow dialog-box

messages and click “Next” to finish installation..

USB

VGA

After installation is finished, restart your computer.

5)Connect the USB cable of the LCD writing panel to one of your

computer’s USB ports.

6): Starting Application Software

Double-click the software icon on the desktop to start the application

software.

STEP 7: Place the battery (comes with the LCD writing panel package) into

the electromagnetic pen. Make sure that the positive end (+) of the battery

is pointing toward the pen tip.

STEP 8: Calibrating the LCD Writing Panel (Optional).

If you decide to calibrate the LCD Writing Panel, use your right mouse button to

click the “Calibration” icon located in the system tray . Click

the icon with the writing pen and follow the on-screen instructions to finish

the panel calibration.

Chapter 5. Electromagnetic Pen

The LCD writing panel’s electromagnetic pen is your magic wand when delivering

your presentation or lecture. It can totally replace the mouse and also act as your

digital writing instrument. The electromagnetic pen is powered by an AAA battery.

Before using the pen, please install a battery into the pen. Be noted that the

positive end (+) of the battery should point toward the pen tip. A battery lasts for

around 5 months. However, we suggest to change the battery every 3 months to

keep it from slowing down in the midst of a presentation.

Operation Mode of the Electromagnetic Pen

· When the pen is used to write on the whiteboard/template, it functions as a pen,

brush, or eraser depending on the selected function.

· When the pen is used to press the buttons on the application software toolbar, it

functions as “clicking” the buttons.

· When the pen is used as a drawing tool (straight line, square, or circle), just tap

the pen on the screen and drag it onto the desired location and then lift it up

at the end point to create an image.

PC Mode of the Electromagnetic Pen

· When the pen is held close to the screen but not touching the screen, it

operates like the movement of your mouse.

· When the pen touches/taps the screen, it functions as the “Left Click” of a

mouse.

· When you tap and drag the pen, it functions as the “Dragging” action of a

mouse.

· When you hold the pen close to the screen, and click the bottom of the switch

on the side of the electromagnetic pen (1), it functions as the “Right Click” of

a mouse.

· When you hold the pen close to the screen, and click the top of the switch on

the side of the electromagnetic pen (2), it functions as the “Double Left Click”

of a mouse.

(1) Mouse “Right Click” (2) Mouse “Double Left Click”

Chapter 6. Features

1. Writes on All Applications

You can write on any computer application, such as lecture programs,

Internet web documents, and Office applications, etc.

2. Easy & Intuitive Interface

The LCD writing panel offers an easy and intuitive “Tool Bar”. Any user,

regardless his or her computer proficiency level, will find that the writing panel

Retrieve any files you want, just like you would while using a mouse. You can use

the electromagnetic pen as a magic wand to touch any icon and write notes on

the panel as naturally as using a traditional pen and a piece of paper.

3. Real Time Demonstration

The LCD writing panel provides powerful functions that can display your written

contents on the panel and projector screen almost at the same time to make the

LCD monitor or projector screen function as an electronic whiteboard.

Chapter 7. Software Operation Basics

Notes: Please See separate Flow!Works Manual

copied in any form without the permssion from Qomo HiteVision, LLC. Information in this

document is subject to change without notice.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Qomo Interaktives Whiteboard Handbücher

Qomo

Qomo QRF600 Bedienungsanleitung

Qomo

Qomo QWB200-BW Bedienungsanleitung

Qomo

Qomo Interactive Whiteboard Bedienungsanleitung

Qomo

Qomo Quest 84 Bedienungsanleitung

Qomo

Qomo HiteVision QRF 500 Bedienungsanleitung

Qomo

Qomo HiteVision QRF 700 Bedienungsanleitung

Qomo

Qomo Hite Vision Bedienungsanleitung

Qomo

Qomo Interactive Whiteboard Bedienungsanleitung

Qomo

Qomo HiteVision QRF 900 Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

SMART

SMART KAPP42 Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART Board

SMART Board 680 Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

SMART

SMART Sympodium IC-150 Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung