Qtx MITO Bedienungsanleitung

MITO

Mito RGB 1420mW

RGB Effects Laser

Item ref: 152.766UK

User Manual

152.766UK User Manual

Thank you for choosing this QTX MITO high power laser.

This high power effects laser offers a vast selection of patterns and grating effects including

the popular "3D", "3D thread" and "galaxy" displays. The high precision pattern themes can be

controlled via the 23 channel DMX-512 control. Intelligent time modulation mimics a two head

laser system allowing two different patterns to be displayed simultaneously. The laser is best

projected on to a flat surface, such as a wall or ceiling, or through smoke. An ideal addition to

any lighting rig or for use in permanent installations such as nightclubs or discos, where it can

produce a stunning laser display.

Over 100 different patterns and 15 different grating effects

RGB colour mixing can produce up to 7 colours

Auto, sound-to-light, pattern select and 23 channel DMX operation modes

Two head laser system modulation

High power RGB laser heads totaling 1.42W

(red 300mW, green 120mW, blue 1000mW)

Key controlled for laser safety

Warning: This item contains laser radiation, no user serviceable/repairable

parts within. Please refer to licensed electrician to perform any required repair

or maintenance. This product is strictly for professional use only. Approved

personnel required to install and operate the unit, strictly following the laser

health and safety guide HSG95.

For detailed information regarding HSG95, please see the below web link:

http://www.hse.gov.uk/pubns/books/hsg95.htm

This product is a class 3B laser, which means extreme care needs to be taken

when operating the device. This laser can cause permanent damage to

eyesight through misuse or misconduct. Please read through this manual

thoroughly before use.

152.766UK User Manual

In the box:

The MITO laser should arrive to you in a single carton. Please ensure the box is in perfect

undamaged condition before accepting goods. You carton should contain the following:

MITO laser unit

2 x IEC power leads (EU and UK)

2 x safety keys

User manual

Installation:

This product must be securely mounted with adequate fixings to hold the weight. If mounted

at a height use a safety wire attached to the eyebolt and a secondary fixing point. Position the

aperture so that its emission is always directed away from people and objects that are able to

reflect the emission towards people. In this regard the separation distances of 3 metres

vertically and 2.5 metres horizontally, cited in HSG95 and shown below must be observed.

Before installation, please read through the cautions below thoroughly:

Power up and run the unit for 10 mins to check the unit is working properly.

Ensure the mains is disconnected before installation.

Find appropriate location for installation. Do not install in hot, moist or dusty

environments and ensure plenty of airflow is available.

Do not expose unit to rain, this unit is strictly for indoor use only.

Do not obstruct air ventilation as it may cause damage to the unit or overheating.

Side view:

152.766UK User Manual

Aerial view:

Connecting:

Use the included UK or EU mains lead to connect to the mains power supply. To wire directly

to the mains, earth wiring must be connected for safety.

Please refer to below colour coding for the correct wiring.

Wire colour

Connection

International Symbol

Brown

Live

Blue

Neutral

Yellow/Green

Earth

152.766UK User Manual

Fuse replacement:

In the event of fuse failure always ensure the mains is switched off and the IEC connection is

removed before opening the fuse cover. Remove the fuse from the fuse holder and replace

with a new one. Always used the correct fuse rating stated on the unit. Place the fuse cover

back in the keyed slot, ensuring you are placing it back the correct way. Do not force the

cover in the wrong way.

Maintenance:

There are no end-user serviceable parts within the unit. To maintain workable condition of the

unit, we are advice to remove collected dust from the unit on a regular basis. Before cleaning

or dusting, always ensure the mains power cable is removed from the unit.

Use a soft cloth, lightly dampened with water or mild detergent to wipe off the dust from the

casing. DO NOT use spray on the case as droplets may enter the unit through the front

aperture or ventilation and cause damage to electronics inside.

Remove the trapped dust from the ventilation holes of the unit with a vacuum cleaner with

brush attachment, a dust blower or a hand brush.

Product layout:

152.766UK User Manual

1. Mic sensitivity, adjust level appropriately to ambient sound level for ideal sound-to-light

trace.

2. Safety key switch.

3. DMX signal indicator, flashes when DMX signal present.

4. XLR socket for DMX signal in.

5. XLR plug for DMX signal loop out.

6. Dip switch to switch between auto, sound to light and DMX mode, also serves as DMX

initial address setting.

7. Built in microphone.

8. D connector for interlock control.

9. Ventilation fan, do not block.

10. Earth connection screw, DO NOT remove.

11. Fuse cover.

12. IEC socket for mains power in.

152.766UK User Manual

DIP Switch Control:

The MITO laser has 3 pre-programmed auto modes and 3 pre-programmed sound-to-light

modes, to choose auto mode switches 9 and 10 must be switched off.

Auto 1

Auto 2

Auto 3

To choose sound-to-light mode, switch 9 must be switch on and switch 10 must be switch off

Sound-to-light 1

Sound-to-light 2

Sound-to-light 3

To switch to DMX mode, switch 10 must be switched on and switches 1-9 can be used to set

the initial DMX address, below is the indication of DMX address for switches 1-9.

DIP1

DIP2

DIP3

DIP4

DIP5

DIP6

DIP7

DIP8

DIP9

DMX

value

128

256

For example if DMX signal for MITO starts at channel 44, the DIP switch value need to be set

as below:

4(DIP3) + 8(DIP4) + 32(DIP6) = 44

152.766UK User Manual

The MITO can be controlled by DMX over 23 channels, below is the function indication for

various DMX values in individual channels:

*S2L –sound-to-light

Channel

DMX

value

Function

CH1/CH12 (identical, ch1

controls pattern1, ch12

controls pattern 2)

Black out

1-6

Auto slide mode reduce pattern size to 50%@1

and 4, 25%@2 and 5, 12.5%@3 and 6

7-50

Auto slide mode full pattern size

51-56

Auto warp mode reduce pattern size to 50%@51

and 54, 25%@52 and 55, 12.5%@53 and 56

57-100

Auto warp mode full pattern size

101-106

S2L slide mode reduce pattern size to 50%@101

and 104, 25%@102 and 105, 12.5%@103 and

106

107-150

S2L slide mode full pattern size

151-156

S2L warp mode reduce pattern size to 50%@151

and 154, 25%@152 and 155, 12.5%@153 and

156

157-200

S2L warp mode full pattern size

201-230

Auto show mode

230-255

S2L show mode

CH2/CH13 (identical, ch2

controls pattern1, ch13

controls pattern 2)

0-200

Pattern selection

201-255

Auto/S2L (control by ch1) pattern

warp/slide(control by ch1)

CH3/CH14 (identical, ch3

controls pattern1, ch14

controls pattern 2)

0-63

Manual zoom out, value increase to size down

64-96

Wobble effect clockwise

97-127

Wobble effect anti-clockwise

128-160

Auto/S2L (control by ch1) ½ size zoom in and

out, value increase to speed up

161-191

Auto/ S2L (control by ch1) zoom in, value

increase to speed up

192-223

Auto/ S2L (control by ch1) zoom out, value

increase to speed up

224-255

Auto/ S2L (control by ch1) full size zoom in and

out, value increase to speed up.

152.766UK User Manual

CH4/CH15 (identical, ch4

controls pattern1, ch15

controls pattern 2)

0-63

Manual rotation

64-191

Auto/S2L (control by ch1) 2 ways rotations

192-223

Auto/S2L (control by ch1) rotation clockwise

224-255

Auto/S2L (control by ch1) rotation anti-clockwise

CH5/CH16 (identical, ch5

controls pattern1, ch16

controls pattern 2)

0-63

Manual warp/slide (control by ch1) around

vertical axis

64-127

Auto/S2L (control by ch1) wave effect around

vertical axis

128-255

Auto/S2L (control by ch1) warp/slide (control by

ch1) around vertical axis

CH6/CH17 (identical, ch6

controls pattern1, ch17

controls pattern 2)

0-63

Manual warp/slide (control by ch1) around

horizontal axis

64-127

Auto/S2L (control by ch1) wave effect around

horizontal axis

128-255

Auto/S2L (control by ch1) warp/slide (control by

ch1) around horizontal axis

CH7/CH18 (identical, ch7

controls pattern1, ch18

controls pattern 2)

0-63

Manual flip around vertical axis

64-127

Auto/S2L (control by ch1) contracting wave effect

around vertical axis

128-159

Auto/S2L (control by ch1) spiral effect around

vertical axis

160-255

Auto/S2L (control by ch1) flip around vertical axis

CH8/CH19 (identical, ch8

controls pattern1, ch19

controls pattern 2)

0-63

Manual Flip around horizontal axis

64-127

Auto/S2L (control by ch1) contracting wave effect

around horizontal axis

128-159

Auto/S2L (control by ch1) spiral effect around

horizontal axis

160-255

Auto/S2L (control by ch1) flip around horizontal

axis

CH9/CH20 (identical, ch9

controls pattern1, ch20

controls pattern 2)

Full pattern

1-127

Manual scroll pattern drawing step 0-100%

128-255

Auto/S2L (control by ch1) drawing effect

CH10/CH21 (identical,

ch10 controls pattern1,

ch21 controls pattern 2)

0-255

Definition(drawing) adjustment, definition

increases with DMX value

CH11/CH22 (identical,

ch11 controls pattern1,

0-15

Pattern original colour

16-31

Laser colour to red

152.766UK User Manual

ch22 controls pattern 2)

32-47

Laser colour to green

48-63

Laser colour to yellow

64-79

Laser colour to blue

80-95

Laser colour to purple

96-111

Laser colour to cyan

112-127

Laser colour to white (full power)

128-191

Uniform colour change

192-255

Graduate colour change by parts

CH23

0-31

Grating effect 1

32-47

Grating effect 2

48-63

Grating effect 3

64-79

Grating effect 4

80-95

Grating effect 5

96-111

Grating effect 6

112-127

Grating effect 7

128-143

Grating effect 8

144-159

Grating effect 9

160-175

Grating effect 10

176-191

Grating effect 11

192-207

Grating effect 12

208-223

Grating effect 13

224-239

Grating effect 14

240-255

Grating effect 15

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Qtx Beleuchtungsausrüstung Handbücher

Qtx

Qtx WSL-Q7 Bedienungsanleitung

Qtx

Qtx PAR-180 Bedienungsanleitung

Qtx

Qtx HPWash 100 Bedienungsanleitung

Qtx

Qtx GoboPar35 Bedienungsanleitung

Qtx

Qtx Pixel-Bar Bedienungsanleitung

Qtx

Qtx Derby 9 Bedienungsanleitung

Qtx

Qtx Derby FX-Bar Bedienungsanleitung

Qtx

Qtx SpectraWash Bedienungsanleitung

Qtx

Qtx PB-1214 Bedienungsanleitung

Qtx

Qtx HZ-1500LED Bedienungsanleitung

Qtx

Qtx LUX-LD01 Bedienungsanleitung

Qtx

Qtx smartLIGHT SL-H7 Bedienungsanleitung

Qtx

Qtx TinyMover Bedienungsanleitung

Qtx

Qtx MDMX-24 Bedienungsanleitung

Qtx

Qtx 3D OBJECTS 152.762UK Bedienungsanleitung

Qtx

Qtx PB-COB Bedienungsanleitung

Qtx

Qtx DMX-D8 Bedienungsanleitung

Qtx

Qtx 150.456UK Bedienungsanleitung

Qtx

Qtx Starscape Bedienungsanleitung

Qtx

Qtx MHS-90L Bedienungsanleitung

Qtx

Qtx LED DERBY III Bedienungsanleitung

Qtx

Qtx GYRO Bedienungsanleitung

Qtx

Qtx RP4 Bedienungsanleitung

Qtx

Qtx TetraCube Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung