Qtx PB-COB Bedienungsanleitung

PB-COB

Zoom LED PAR Bar with

Wireless Foot Control

Item ref: 151.557UK

User Manual

Thank you for choosing this QTX PB-COB PAR bar. A PAR bar kit fantastic for mobile DJs and

performers who need their lighting to be quick to set up and easily transportable. This PAR bar

boasts 4 high power Cans, each fitted with 1 x 30W 4-in-1 COB LEDs. Smooth colour blending

control can be achieved with the included wireless foot controller or via DMX. The main unit

also has 4 built in white LEDs to add a flash effect, adding extra dynamics to the light display.

In the box:

Your PB-COB should arrive to you in a single carton in good condition.

Carton 1:

PAR bar with 4 LED PAR Cans

Wireless foot controller

Padded carry case

2 x IEC mains lead (UK and EU)

Tripod stand

Mounting/free standing brackets

Warning:

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.

In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.

Qualified personnel should then check the unit before continuing use.

Always check the correct supply voltage and the condition of the IEC lead before

connecting to a power outlet.

Always ensure any DMX leads used are in good condition with no shorted connections or

damaged plugs.

Please read through this manual thoroughly before use, any damage cause by

misuse of product will not be covered by warranty.

Please do not open cover, contains high voltage. This

product is not serviceable or repairable by the end user.

Please refer to qualified personnel for service and repair.

er or professional when unit malfunction.

151.557UK User Manual

Setup:

PB-COB is ready to use straight from the box, no complicated set up required. Simply erect

the tripod stand supplied and slot in the PAR bar unit on top of stand via the 35mm top hat.

Pan and tilt for each PARcan can be adjusted individually to illuminate the required area.

The PB-COB is also suitable for free standing or ceiling mounting, simply attach the supplied

brackets to both ends of the PAR bar as free standing feet or for mounting to the ceiling.

Product Layout:

1. DMX signal out (XLR male socket)

2. DMX signal in (XLR female plug)

3. IEC power out

4. IEC power in

5. Built in microphone

6. Microphone sensitivity

7. 7 Segment LCD display

8. Manual control button

9. White flash LED

10. 10W 4in1 COB PAR cans

11. Earth connection screw Do NOT

remove

12. Wireless antenna

151.557UK User Manual

Zoom-able cans:

One of the special features on PB-COB is that each individual can has an adjustable focal lens

to allow light output to focus for a spot effect or dilate as wash effect to suit different

applications.

Each can is capable of projecting a beam angle from 14° to 36°. To adjust, turn the front focal

lens anti-clockwise for a focused spot effect or turn clockwise for a dilated wash effect.

Manual control menu:

Press the “menu” button to enter the setting menu.

Press “up” and “down” to navigate through various setting options.

Press “enter” to enter the desired setting.

Choose set value by “up” and “down” buttons and confirm setting by pressing “enter”.

Sub menu

Function



()

PAR light only auto program 1-17,  speed

adjustment, slow to fast

()

Flash light only auto program 1-10,  speed

adjustment, slow to fast

()

PAR light and flash auto program 1-3,  speed

adjustment, slow to fast



()

PAR light only sound activate program 1-12

()

Flash light only sound activate program 1-10

()

PAR light and flash sound activate program 1-3





Manual colour mixing, red value 0% to 100% brightness



Manual colour mixing, green value 0% to 100% brightness



Manual colour mixing, blue value 0% to 100% brightness



Manual colour mixing, white value 0% to 100% brightness



Strobe setting for manual colour mixing mode, slow to fast





Synchronised auto mode,  speed adjustment, slow

to fast



Synchronised sound activate mode





DMX 3 channel mode, start address setting



DMX 6 channel mode, start address setting



DMX 28 channel mode, start address setting





Slave mode, ID value





Enable as master for synchronised set up 



Enable wireless function for foot control



Unit self function test



Reset to initial factory setting

151.557UK User Manual

Operation:

The PB-COB can operate in stand-alone, master, slave or DMX modes.

Stand-alone:

For stand-alone display show, Auto, sound-activated or manual colour mode may be selected.

Simply select  (auto mode) or  (sound activate mode) from the menu and select if you

want PAR cans only (XX or XX), Flash only (XX or XX) or PAR cans and flash (XX or

XX). For auto modes, speed (to ) can be set after the preferred mode is confirmed.

For manual colour modes, select  and enter each RGBW colour mixing value and strobe

speed, if required.

Master/Slave:

More than one units of PB-COB can be operated together via a DMX link. To set a unit as

master, select  from the menu follow by , select  to enable unit as master.

In addition to mirroring the master unit effect, all slave units can also perform a sequential

chase. In order to perform the sequential chase correctly, all slave units need to have their ID

value set accordingly. The master unit will recognize slave units in order of ID value, for

example a setup of four slave units with address value of 1,2,3,4 with be the same as

1,12,24,56.

Synchronise mode:

Two units of PB-COB can be synchronised with each other via a DMX connection. When under

synchronised mode, both units will share the same speed, pattern or sound activation but

display a different light show. To enter synchronised mode, simply select  from the menu

and choose from  for synchronized auto mode or  for synchronized sound-activated

mode.

DMX mode:

The PB-COB can be controlled by DMX signal, simply connect the DMX signal source to the

DMX in at the rear of the unit via a balanced XLR lead. Extra fixtures can be controlled by the

same DMX signal by looping through the DMX out on the PB-COB. To enter DMX mode, select

from the menu and choose which channel mode you wish to use (3, 6 or 28 channel

mode). Confirm the correct DMX start address. A flashing address value indicates that the unit

has correctly entered DMX mode and is awaiting a DMX signal. The DMX address value will

remain lit as soon as DMX signal is detected from the DMX connection.

151.557UK User Manual

Foot Controller:

PB-COB uses wireless technology to allow wire-free control from the foot controller.

This greatly increases the flexibility for light set up and controlling, great for mobile gigs and

performances.

Wireless foot control is powered by a single A23 cell. The battery compartment is located at

the bottom of the foot controller (a Philips tip screwdriver is required to open the

compartment).

To enable the wireless function on the PB-COB unit, select > from the menu and

select yes to confirm. Make sure both antennas are pointed upward from the foot controller

and from the PB-COB unit. Now the PB-COB is ready to be controlled by the foot controller.

AUTO –Press to cycle through various preset auto programs, cycling through  > >

 > > >….etc

MUSIC –Press to cycle through various preset sound to light programs, cycling through 

> >  > > >….etc

COLOUR –Press to cycle through 15 preset static colours

BLACKOUT –press to enter and exit blackout mode

151.557UK User Manual

DMX channel value reference:

3 channel mode (channel 2/3 functions is depend on the value of channel 1):

Channel

DMX Value

Function

Channel 1

000-009

Black out

010-050

PAR only auto show

051-090

Flash only auto show

091-130

PAR and flash auto show

131-170

PAR only auto show

171-210

Flash only auto show

211-255

PAR and flash auto show

Channel 2 (channel 1 at 010-050)

000-014

PAR only auto program 1

015-029

PAR only auto program 2

030-044

PAR only auto program 3

045-059

PAR only auto program 4

060-074

PAR only auto program 5

075-089

PAR only auto program 6

090-104

PAR only auto program 7

105-119

PAR only auto program 8

120-134

PAR only auto program 9

135-149

PAR only auto program 10

150-164

PAR only auto program 11

165-179

PAR only auto program 12

180-194

PAR only auto program 13

195-209

PAR only auto program 14

210-224

PAR only auto program 15

225-239

PAR only auto program 16

240-255

PAR only auto program 17

Channel 2 (channel 1 at 051-090)

000-024

Flash only auto program 1

025-049

Flash only auto program 2

050-074

Flash only auto program 3

075-099

Flash only auto program 4

100-124

Flash only auto program 5

125-149

Flash only auto program 6

150-174

Flash only auto program 7

175-199

Flash only auto program 8

200-224

Flash only auto program 9

225-255

Flash only auto program 10

Channel 2 (channel 1 at 091-130)

000-099

PAR and flash auto program 1

100-199

PAR and flash auto program 2

200-255

PAR and flash auto program 3

151.557UK User Manual

Channel 2 (channel 1 at 131-170)

000-014

PAR only auto program 1

015-029

PAR only auto program 2

030-044

PAR only auto program 3

045-059

PAR only auto program 4

060-074

PAR only auto program 5

075-089

PAR only auto program 6

090-104

PAR only auto program 7

105-119

PAR only auto program 8

120-134

PAR only auto program 9

135-149

PAR only auto program 10

150-164

PAR only auto program 11

165-179

PAR only auto program 12

180-194

PAR only auto program 13

195-209

PAR only auto program 14

210-224

PAR only auto program 15

225-239

PAR only auto program 16

240-255

PAR only auto program 17

Channel 2 (channel 1 at 171-210)

000-024

Flash only auto program 1

025-049

Flash only auto program 2

050-074

Flash only auto program 3

075-099

Flash only auto program 4

100-124

Flash only auto program 5

125-149

Flash only auto program 6

150-174

Flash only auto program 7

175-199

Flash only auto program 8

200-224

Flash only auto program 9

225-255

Flash only auto program 10

Channel 2 (channel 1 at 211-255)

000-099

PAR and flash auto program 1

100-199

PAR and flash auto program 2

200-255

PAR and flash auto program 3

Channel 3 (Channel 1 at 010-130)

000-255

Auto program speed, slow to fast

6 channel mode:

Channel

DMX Value

Function

Channel 1

000-255

PAR Red dimmer 0-100%

Channel 2

000-255

PAR Green dimmer 0-100%

Channel 3

000-255

PAR Blue dimmer 0-100%

Channel 4

000-255

PAR White dimmer 0-100%

Channel 5

000-191

Flash dimmer 0-100%

192-200

Sound to light flash

201-249

Continuous flash

250-255

All on

Channel 6

000-255

Flash speed 0-100%

151.557UK User Manual

28 channel mode:

Channel

DMX Value

Function

Channel 1

000-255

PAR 1 Red dimmer 0-100%

Channel 2

000-255

PAR 1 Green dimmer 0-100%

Channel 3

000-255

PAR 1 Blue dimmer 0-100%

Channel 4

000-255

PAR 1 White dimmer 0-100%

Channel 5

000-255

PAR 1 Master dimmer 0-100%

Channel 6

000-255

PAR 1 Strobe speed 0-100%

Channel 7

000-255

PAR 2 Red dimmer 0-100%

Channel 8

000-255

PAR 2 Green dimmer 0-100%

Channel 9

000-255

PAR 2 Blue dimmer 0-100%

Channel 10

000-255

PAR 2 White dimmer 0-100%

Channel 11

000-255

PAR 2 Master dimmer 0-100%

Channel 12

000-255

PAR 2 Strobe speed 0-100%

Channel 13

000-255

PAR 3 Red dimmer 0-100%

Channel 14

000-255

PAR 3 Green dimmer 0-100%

Channel 15

000-255

PAR 3 Blue dimmer 0-100%

Channel 16

000-255

PAR 3 White dimmer 0-100%

Channel 17

000-255

PAR 3 Master dimmer 0-100%

Channel 18

000-255

PAR 3 Strobe speed 0-100%

Channel 19

000-255

PAR 4 Red dimmer 0-100%

Channel 20

000-255

PAR 4 Green dimmer 0-100%

Channel 21

000-255

PAR 4 Blue dimmer 0-100%

Channel 22

000-255

PAR 4 White dimmer 0-100%

Channel 23

000-255

PAR 4 Master dimmer 0-100%

Channel 24

000-255

PAR 4 Strobe speed 0-100%

Channel 25

000-255

Flash 1 speed 0-100%

Channel 26

000-255

Flash 2 speed 0-100%

Channel 27

000-255

Flash 3 speed 0-100%

Channel 28

000-255

Flash 4 speed 0-100%

151.557UK User Manual

Specifications

Power

110-240Vac, 50/60Hz (IEC)

Power consumption

130W

Fuse rating

T3.15A

LED type

4 x 30W RGBW COB LED and 4 x

1W white LED

Beam angle

14-36°

DMX channels

3, 6 or 28

Height adjustment

1.5 - 2.5m

Dimensions : PAR bar

1023 x 215 x 71mm

Weight

11.2kg

LED safety standard

BSEN62471:2008

Troubleshooting

No power (mains)

Check mains voltage is correct and outlet is switched on

Check IEC lead and fuse (if fuse continually blows, refer to your

dealer)

No light output

Check control panel mode settings (standby, slave, sensitivity, DMX)

Check DMX settings from controller (dimmer levels, blackout etc.)

Check foot control ensure unit not in black out mode

No strobe output

Check strobe settings on control panel or from DMX controller

Check Mic sensitivity is not set to minimum

Unresponsive to DMX

Check DMX connection and leads

Check that unit is in DMX mode and ensure DMX address remains lit

to confirm receiving DMX signal

Check DMX controller is not set to black out

Check DMX controller is on correct fixture/page

Check master dimmer value

Check correct DMX address is set

Overheating/

cutting out

Check that the unit is not too close to a heat source

Foot control not

working

Check wireless function is enabled on the light unit

Check control has battery inserted and battery is not flat

Check antennas on both light unit and control are lifted

Check the unit and control is not located next to wireless router as

interference may occur

151.557UK User Manual

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Inhaltsverzeichnis

Andere Qtx Beleuchtungsausrüstung Handbücher

Qtx

Qtx TinyMover Bedienungsanleitung

Qtx

Qtx MHS-90L Bedienungsanleitung

Qtx

Qtx Tri-Bar Bedienungsanleitung

Qtx

Qtx MHS-30 Bedienungsanleitung

Qtx

Qtx Derby FX-Bar Bedienungsanleitung

Qtx

Qtx DMX-D8 Bedienungsanleitung

Qtx

Qtx smartLIGHT SL-H7 Bedienungsanleitung

Qtx

Qtx PAR-180 Bedienungsanleitung

Qtx

Qtx Starscape Bedienungsanleitung

Qtx

Qtx MITO Bedienungsanleitung

Qtx

Qtx Wash & Beam Bedienungsanleitung

Qtx

Qtx 3D OBJECTS 152.762UK Bedienungsanleitung

Qtx

Qtx TETRAMER Bedienungsanleitung

Qtx

Qtx LED TWISTER IV Bedienungsanleitung

Qtx

Qtx LED DERBY III Bedienungsanleitung

Qtx

Qtx LUX-LD01 Bedienungsanleitung

Qtx

Qtx RP4 Bedienungsanleitung

Qtx

Qtx PB-1214 Bedienungsanleitung

Qtx

Qtx HPWash200 Bedienungsanleitung

Qtx

Qtx HPWash 100 Bedienungsanleitung

Qtx

Qtx 151.604UK LED DUOFLOWER Bedienungsanleitung

Qtx

Qtx MDMX-24 Bedienungsanleitung

Qtx

Qtx Derby 9 Bedienungsanleitung

Qtx

Qtx HZ-1500LED Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung