171.808UK, 171.809UK User Manual
Operation
The U-MIC receiver is designed to connect to a microphone input channel on a
mixer or amplifier. Turn down the volume level on the microphone input of the
mixer or amplifier before connecting to avoid loud noises when connecting.
Connect the 3.5mm plug end of the supplied lead to the U-MIC receiver (7) and
the 6.3mm plug into an appropriate microphone input channel.
The beltpack transmitter has an on/off switch (4), which should be in the up
position (off). The top volume control (1) should be turned fully down. Connect
the neckband microphone to the 3.5mm microphone input (2).
Slide open the cover of the battery compartment (5) and insert 2 x AA alkaline
batteries, ensuring that the polarity is the correct way around.
Move the switch down to the “on” position and the power indicator (3) should
light. Note that the switch has a centre position which is also “on”.
Gradually turn up the volume control on top of the transmitter and the level on
the mixer or amplifier and speak into the neckband microphone until the sound
can be heard through the connected speakers or recording equipment. Increase
the volume to the required level.
If the microphone is not being used, turn down the volume level on the top of the
beltpack transmitter and the mixer/amplifier and switch the power off.
For long term storage, unplug the jack and USB receiver and remove the
batteries from the beltpack transmitter.
