Proof 1 (October 30, 2014)
TITLE
DWG. NO.
SIZE SCALESHEET OF
REV.
QSG, INST, SOFIA
1279600 A
31/1
C
NOTE: All prints CMYK
2
Artwork Notes:
1. Die lines and/or Key lines do not print
2. All unspecied colors print BLACK
3. All unspecied color tint values are 100%
4. Fonts:
AvenirNextLTPro-Bold (OTF)
AvenirNextLTPro-Demi (OTF)
AvenirNextLTPro-DemiCn (OTF)
AvenirNextLTPro-DemiCnIt (OTF)
AvenirNextLTPro-DemiIt (OTF)
AvenirNextLTPro-Medium (OTF)
AvenirNextLTPro-MediumIt (OTF)
AvenirNextLTPro-Regular (OTF)
Helvetica (TrueType)
Helvetica-Bold (TrueType)
Helvetica-Light (TrueType)
MyriadPro-Bold (OTF)
MyriadPro-Semibold (OTF)
MyriadPro-SemiboldIt (OTF)
Universal-NewswithCommPi (Type 1)
ZapfDingbatsITC (TrueType)
Paper Roll
Calibration
Cassette
Pouch
Calibration
Cassette
AC Power Cord DC Power Cord
SD Cards:
Test Type Files (Blue)
Language Files (Yellow)*
Blank SD Card
UNPACK SOFIA
◗
Inspect the shipping container for obvious shipping damage prior to opening.
◗
Unpack the shipping container and inspect the unit for damage.
UNPACK INSTALLATION PACK
◗
Inspect the shipping container for obvious shipping damage prior to opening.
◗
Unpack the shipping container and inspect the contents for damage.
CONNECT TO POWER AND TURN ON
Place Sofia on the counter top within reach of an electrical outlet. The unit is portable
and can be moved to a suitable location for testing.
INSTALLING TEST TYPE FILES
Test files must be loaded prior to performing testing. A new test type file is needed for
each new assay. Select “Load Test Types” from the Supervisor menu. Then insert the
appropriate SD Card with the test type files (blue) into the slot in the back of Sofia.
Follow the Sofia prompts to complete the installation.
CALIBRATION CHECK
◗
Use the up/down keys to highlight CALIBRATION from the menu.
◗
Press the soft key under the lower right corner of the display screen under SELECT.
◗
Remove Calibration Cassette from the Pouch.
Insert the Calibration Cassette into Sofia
and close the drawer. Sofia will perform
the Calibration Check automatically.
The Sofia display will indicate when the
Calibration Check is completed.
NOTE: If Calibration Check cannot be
completed successfully, notify the on-site
Supervisor or contact Quidel Technical
Support for assistance.
The Calibration Cassette will automatically
eject when calibration is complete. Remove
and return the Calibration Cassette to the
storage Pouch.
Select OK to return to the Main Menu after
calibration is complete.
Important: Store the Calibration Cassette in
the provided storage Pouch between uses.
Sofia
Barcode Scanner
Run QC according to assay specific Package Insert.
Paper Cover
*Language Files (Yellow) may not be provided
in the Installation Pack. If needed, contact
Quidel Technical Support.
BATTERY Gold
LRG AA SIZE 1.5V
SUPER ALKALINE
BATTERY Gold
LRG AA SIZE 1.5V
SUPER ALKALINE
BATTERY Gold
LRG AA SIZE 1.5V
SUPER ALKALINE
BATTERY Gold
LRG AA SIZE 1.5V
SUPER ALKALINE
4x LR6-AA + 6V, 4.16 A
Plug the DC power cord
into the power port in the
back of Sofia.
1
Plug the appropriate, country
specific AC power cord into the
DC Power Cord and appropriate
electrical outlet.
2
Plug the Barcode scanner
into the PS2 port in the back
of Sofia. Note: The Barcode
scanner may have 2 plugs;
one will remain unplugged.
3
Turn Sofia on using the power switch
located on the rear panel. Hold the
toggle switch down until the screen
illuminates (1-2 seconds).
4
Barcode Scanner Stand
