GENERAL RULES FOR SAFETY
produced by said company.
of security.
specified in these instructions must be
3) Do not leave packaging materials within the reach of
children, as they constitute potential sources of danger.
10) The installation must be carried out in accordance
with Standards UNI 8612, CEN pr EN 12453 and CEN
pr EN 12635. The safety level of the equipment
sensitive bands, etc.) allow you to avoid dangers
6) The manufacturer declines all responsibility for
inconveniences arising from improper use of the
equipment or applications other than that for which it
was created.
system in emergency cases, and deliver to
elements that make up the system
distance or other pulse generators, to
In non-EEC countries, in addition to respecting national
regulations, to obtain an adequate level of safety, the
above-mentioned standards must be met.
repair or direct intervention; it is necessary
13) Check that before electrical installation
other system components that have not been
greater than 3 mm. Alternatively, it is recommended
remain in close proximity to the equipment during
minus light signaling as well as
18) For maintenance, use only
19) Do not make any modification to the
22) Do not leave remote controls within reach of children.
structure of the gate, in addition to the devices
information regarding manual operation of the
12) The power supply network of the automatic
equipment must be equipped with an omnipolar switch
with a contact opening distance equal to or
15) Safety devices (e.g.: photocells,
for the people around.
of automatic equipment in the event that they are used
8612, EN pr EN 12604 and CEN pr EN 12605.
23) The user must refrain from any attempt to
Improper use of the product can cause serious
personal injury. correctly performed. Connect the parts to it
21) Do not allow children, or any other person,
a serious safety hazard.
16) For each team it is essential to use at least
automatic equipment.
5) This product has been designed and built exclusively
for the use indicated in this manual. Any application not
expressly indicated could be harmful to the equipment
or
a signaling sign properly attached to the
original spare parts.
regarding safety and correct operation
8) The mechanical construction elements must comply
with the provisions of the UNI Regulations
functioning.
1) ATTENTION! In order to ensure personal safety,
it is important to carefully follow all instructions.
Improper installation or
20) The installation technician must provide all the
11) Before carrying out any operation on the equipment,
disconnect it from the power supply.
The presence of flammable gases or smoke implies
that is attached to the product.
omnipolar interruption.
(crushing, dragging, cutting).
involuntarily.
24) Everything that is not expressly
14) Make sure that the ground connection is
2) Read the instructions carefully before starting to
install the equipment.
the use.
4) Keep the instructions for future reference.
automatic must be C+E.
considered not permitted.
metal parts of the closure and the yellow/green cable of the
prevent automatic equipment from being activated
17) The manufacturer declines all responsibility
automation.
use a 6 A magneto-thermal switch with
7) Do not install the device in an explosive atmosphere.
system user the "User instructions"
derived from mechanical actions of movement
9) The manufacturer is not responsible for non-
observance of the appropriate technical criteria in the
construction of the closures to be motorized, nor for
deformations that can be verified with
Always consult with specialized personnel.
there is a differential switch with a threshold of 0.03 A
WARNINGS FOR THE INSTALLER
Machine Translated by Google
