R3 ECHORING ER--EB 1000M Bedienungsanleitung

ECHORING ETHERNET BRIDGE

User Manual

EREB 1000M (EU version)

r20.08

Contact Information:

R3 – Reliable Realtime Radio Communications GmbH

Bismarckstraße 1012 www.echoring.com

10625 Berlin [email protected]

http://echoring.com

Revision: 1.2

http://echoring.com

Revision: 1.2

Table of Contents

1 General Terms of Use of this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Please Observe the Following Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

3 Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.1 Intended Use of the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.2 Versions of this Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.3 Conformity/Country Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

4 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4.2 Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4.2.1 DIN Rail Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4.2.2 Wall or Mast Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.3 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.4 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Webbased Configuration Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.2 Set up and access Web User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.3 Configure the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.4 Replace an Ethernet Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.5 Update devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

http://echoring.com

Revision: 1.2

http://echoring.com

Revision: 1.2

1 General Terms of Use of this Document

It is the user’s responsibility to check regularly and ensure they have downloaded the latest

version of this manual, as R3 may edit, revise, or improve product documentation over

time.

The user must ensure the product is used correctly according to this document’s guidelines,

in particular observing all relevant standards and regulations.

This document, including all diagrams and illustrations, is copyrightprotected. Any and all

changes violate our Terms of Use.

ATTENTION — Installation must only be performed by qualified specialist personnel. !

http://echoring.com

Revision: 1.2

2 Please Observe the Following Notes

Please observe and obey the following note formats and instructions throughout the docu

ment:

TIP — Text in this format is information explaining the use of the product.

!ATTENTION — Text in this format must be observed in order to avoid malfunction and/or even damage,

or to avoid security risks.

iEXAMPLE — Text in this format provides examples.

2. Please Observe the Following Notes Page 2 of 11 © by R3 – Reliable Realtime Radio

http://echoring.com

Revision: 1.2

3 Product Information

3.1 Intended Use of the Product

The EchoRing Ethernet Bridge (device) enables a timecritical and reliable wireless link

between Ethernetbased industrial protocol devices. It can be employed for:

• Replacing cablebased network infrastructure with a wireless connection in machinery,

vehicles and devices, enabling simplified infrastructure and flexible operations.

• Replacing network cables between moving structures or components in machinery,

vehicles and devices in order to reduce weight, size and use of installation space, as

well as wear and tear on network infrastructure.

ATTENTION — This radio device is intended for transmitting wireless data. It is furthermore intended to

be used for low latency and/or high reliability data communications. When using device, be mindful of the

general behavior and physics of the wireless channel. Abrupt or predictable changes in the operational

environment, such as movement of people or objects, and the presence of interfering devices, can result in

reduced wireless signal quality and failed data transmissions. Thus, when used in critical applications,

where the result of poor wireless connectivity can cause severe human injury or economic

damage, intended operations cannot rely solely on this device. A comprehensive system solution,

such as an integrated wired failsafe in case of poor wireless connectivity, must be installed and tested to

the level of intended application’s importance.

3.2 Versions of this Product

• EREB 1000M (EU version)

• EREB 1001M (US version) – NOT COVERED BY THIS DOCUMENTATION

3.3 Conformity/Country Approvals

The device complies with these essential EU directives, which include modification:

• 2011/65/EU Restriction of the use of certain hazardous substances (RoHS), and

• 2014/53/EU Radio equipment (RED).

Additional information (e.g. declaration of conformity, documents, test reports, restrictions,

etc.) can be found on www.echoring.com.

http://echoring.com

Revision: 1.2

4 Installation

ATTENTION — The device emits RF energy in the ISM (Industrial, Scientific, Medical) band. Make sure

that all medical devices used in proximity to this device meet appropriate susceptibility specifications for

this type of RF energy.

!ATTENTION — The device is recommended for use in industrial environments. It is mandatory to employ

a functional ground connection to comply with safety requirements.

!ATTENTION — The device is not supposed to be disassembled. Do not break the seal!

4.1 General

TIP — Please consider the general behavior and physics of the wireless channel when deploying devices.

Placement of devices may need to be adjusted during functional testing.

4.2 Mechanical Installation

Figure 4I: Dimensions are in millimeters (mm)

Screw the antenna to the device’s SMA connector. Note: antenna is excluded from diagram

4.2.1 DIN Rail Mounting

Figure 4II: DIN rail mounting

1. Use the selftapping screws provided

to attach the device to DIN rail. Place

the screws through the small DIN rail

adapter plates and screw into device

in their designated position.

2. Place the device nowfixed adapter

on the top edge of DIN rail.

3. Push the device downwards so it

snaps into place.

TIP — To release device from DIN rail, push the device downwards while pulling outwards.

4. Installation Page 4 of 11 © by R3 – Reliable Realtime Radio

http://echoring.com

Revision: 1.2

4.2.2 Wall or Mast Mounting

1. Place the wall mounts in their desired

positions on the device. The mounts

can be placed horizontally or verti

cally.

2. Use adequate force to drive the

mount bolt in the device notch. If

using a hammer, please be sure not

to accidently hit and damage the

device casing.

3. Repeat with the other mounts.

Figure 4III: Wall or mast mounting

TIP — Attaching wall mounts to a device is irreversible.

4.3 Connectors

Figure 4IV: Connectors

TIP — The Ethernet connector is PoE (Power over Ethernet) and can also be used to supply power to the

device.

Figure Pins Function

1 Power supply + (9 – 30 V DC)

2 Ground for digital input

3 Ground for power supply

4 Digital input + (9 – 30 V DC)

5 Functional ground

Table 4i: Power connector (M12 plug, A coded)

ATTENTION — The signal cable for digital input must be carried in the same cable as the power supply

and functional ground if the line length exceeds 3 meters. !

http://echoring.com

Revision: 1.2

Figure Pins Function Color Mark (T568B)

1 Send Orange/white

2 Receive Green/white

3 Send Orange

4 Receive Green

Table 4ii: PoE/Ethernet connector (M12 plug)

4.4 LED Indicators

Figure 4V: LED Indicators

LED Color/pattern Meaning

PWR •Off No power.

•Green Device is powered on.

ETH •Off No traffic.

•Green flashing Traffic (data) is being sent through the device.

CFG •Off Device is in operational mode.

•Green Device is in configuration mode.

•Green flashing Device is updating its firmware.

HLT •Green Device is running successfully according to configuration.

•Red Device does not run. Device is either out of range of other

devices or a software related problem has occurred.

ETH +

CFG

•Green flashing Device is in Performance Analyzer mode.

Table 4iii: Explanation of LEDs

Inhaltsverzeichnis

Andere R3 Netzwerk-Router Handbücher

R3 EchoRing ER-EB 1000M Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise