RAB FXLED Bedienungsanleitung

FXLED INSTALLATION INSTRUCTIONS

Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.

Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding

is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A

PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.

SLIPFITTER MOUNTING

1. The sliptter mounting ts a 2 3/8” O.D. Tenon. Place the

sliptter over the Tenon and secure the xture with the

Set Screws (2) on the side of the sliptter.

2. Remove two screws on side of Round Cover Plate.

Remove the Round Cover Plate and adjust the angle of

the xture.

3. Loosen the Locking Bolt and swivel xture to desired

angle.

4. Tighten the Locking Bolt and re-attach Round Cover

Plate.

Tenon

Set Screws

Round

Cover

Plate

Locking Bolt

Pivot Bolts

TRUNNION MOUNTING

CAUTION: UL and C-UL listed or CSA certied liquid tight

cord grip suitable for use with three conductor type STW

exible cord shall be used for connection to a wet location

outlet box provided by others.

To adjust the angle of the xture using the trunnion:

1. Loosen the Pivot Bolts & angle locking screw.

2. Adjust xture to desired angle.

3. Tighten Pivot Bolts & angle locking screw.

TROUBLESHOOTING

1. Check that the line voltage at the xture is correct. Refer

to wiring directions.

2. Be sure the xture is grounded properly.

3. Is the photocell, if used, functioning properly?

CLEANING & MAINTENANCE

CAUTION: Be sure xture temperature is cool enough

to touch. Do not clean or maintain while xture is

energized.

1. Clean glass lens with non-abrasive glass cleaning

solution.

2. Do not open the xture to clean the LED. Do not touch

the LED.

ACCESSORIES

Chrome Wire Guard: GDFXLED78W

Poly Shield: GDFXLED78P

Lens & Door Replacement: LFXLED78 (bronze)

LFXLED78W (white)

FXLED INSTALLATION INSTRUCTIONS

Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.

Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com

GUARD OR SHIELD INSTALLATION

Wire Guard and Poly Shield mount with (4) #8-32 Stainless

Steel Screws. Screws are provided with the accessory. See

g. 3 for Guard. See g. 4 for Shield

1. Line up guard or shield with existing pre-drilled holes in

frame as shown, tighten screws.

GUARD & SHIELD INSTALLATION

The Wire Guard and Poly Shield can be mounted on the

same xture with (4) #8-32 screws as shown below.

Stainless

Steel

Screws

Fig. 3

Fig. 4

Easy Installation & Product Help

Tech Help Line

Call our experts 888 RAB-1000

Northvale, New Jersey 07647 USA

rabweb.com

Visit our website for product info

Answered promptly sales@rabweb.com

Note: These instructions do not cover all details or variations

in equipment nor do they provide for every possible situation

during installation, operation or maintenance.

FXLED IN 1113

Patent - US:

pat. D659,280

ON-OFF WIRING

Universal voltage driver permits operation at 120V thru 277V,

50 or 60 Hz. Units ordered with (/480V) sux are 480V, 60Hz.

For Non-Dimming, follow the wiring directions as in g. 1.

1. Connect the black xture lead to the (+) LINE supply lead.

2. Connect the white xture lead to the (-) COMMON supply

lead.

3. Connect the GROUND wire from xture to supply ground.

LIGHT

FIXTURE

(+)LINE BLACK

(-)COMMON WHITE

GROUND GROUND

Fig. 1

Fig. 2

0-10V DIMMABLE WIRING

Universal voltage driver permits operation at 120V thru 277V,

50 or 60 Hz. For 0-10V Dimming, follow the wiring directions

as in g. 2.

1. Connect the black xture lead to the (+) LINE supply lead.

2. Connect the white xture lead to the (-) COMMON supply

lead.

3. Connect the GROUND wire from xture to supply ground.

Do NOT connect the GROUND of the dimming xture to

the output.

4. Connect the purple xture lead to the (V+) DIM lead.

5. Connect the gray xture lead to the (V-) DIM lead.

6. Cap the yellow xture lead, if present. Do NOT connect.

Stainless

Steel

Screws

Stainless

Steel

Screws

Inhaltsverzeichnis

Andere RAB Beleuchtungsausrüstung Handbücher

RAB

RAB Lightcloud Controller Mini Bedienungsanleitung

RAB

RAB LESLIE Bedienungsanleitung

RAB

RAB STRINGER34 Bedienungsanleitung

RAB

RAB STRING-50 Bedienungsanleitung

RAB

RAB DRI-21-EMGR-DC-D10 Bedienungsanleitung

RAB

RAB GUS- 2FT Bedienungsanleitung

RAB

RAB EXIT34-RG Bedienungsanleitung

RAB

RAB SMSLES2X13 Bedienungsanleitung

RAB

RAB X34 Bedienungsanleitung

RAB

RAB STL110H/L Bedienungsanleitung

RAB

RAB PLC-9-V-8XX-BYP Bedienungsanleitung

RAB

RAB SWISHFA -2X2 Bedienungsanleitung

RAB

RAB GT500R/L Bedienungsanleitung

RAB

RAB TOMO- 2FT Bedienungsanleitung

RAB

RAB ECOMBO34 Bedienungsanleitung

RAB

RAB EZPAN HE 1X4 Bedienungsanleitung

RAB

RAB T5HE-10-24P-8-EXT Series Bedienungsanleitung

RAB

RAB STL200H/L Bedienungsanleitung

RAB

RAB PLL-14-8 DIR Series Bedienungsanleitung

RAB

RAB X17 XFU 60W Bedienungsanleitung

RAB

RAB SHARK - 8FT Bedienungsanleitung

RAB

RAB HAZL34-40 Bedienungsanleitung

RAB

RAB T8 Bedienungsanleitung

RAB

RAB EM Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung