Racal Instruments 1260-60 Bedienungsanleitung

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

1260 VXI

SWITCHING CARD

1260-60

18GHz MICROWAVE

SWITCH MODULE

PUBLICATION NO. 980673-011

RACAL INSTRUMENTS

Racal Instruments, Inc.

4 Goodyear St., Irvine, CA 92618-2002

Tel: (800) RACAL-ATE, (800) 722-2528, (949) 859-8999; FAX: (949) 859-7139

Racal Instruments, Ltd.

480 Bath Road, Slough, Berkshire, SL1 6BE, United Kingdom

Tel: +44 (0) 1628 604455; FAX: +44 (0) 1628 662017

Racal Systems Electronique S.A.

18 Avenue Dutartre, 78150 LeChesnay, France

Tel: +33 (1) 3923 2222; FAX: +33 (1) 3923 2225

Racal Systems Elettronica s.r.l.

Strada 2-Palazzo C4, 20090 Milanofiori Assago, Milan, Italy

Tel: +39 (0)2 5750 1796; FAX +39 (0)2 5750 1828

Racal Elektronik System GmbH.

Technologiepark Bergisch Gladbach, Friedrich-Ebert-Strasse, D-51429 Bergisch Gladbach, Germany

Tel.: +49 2204 8442 00; FAX: +49 2204 8442 19

Racal Australia Pty. Ltd.

3 Powells Road, Brookvale, NSW 2100, Australia

Tel: +612 9936 7000, FAX: +612 9936 7036

Racal Electronics Pte. Ltd.

26 Ayer Rajah Crescent, 04-06/07 Ayer Rajah Industrial Estate, Singapore 0513.

Tel: +65 7792200, FAX: +65 7785400

Racal Instruments, Ltd.

Unit 5, 25F., Mega Trade Center, No 1, Mei Wan Road, Tsuen Wan, Hong Kong, PRC

Tel: +852 2405 5500, FAX: +852 2416 4335

http://www.racalinstruments.com

PUBLICATION DATE: May 8, 2001

This book or parts thereof may not be reproduced in any form without written permission of the publisher.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

WARRANTY STATEMENT

All Racal Instruments, Inc. products are designed and manufactured to exacting standards and in full

conformance to Racal’s ISO 9001 procedures.

For the specific terms of your standard warranty, or optional extended warranty or service agreement, contact

your Racal customer service advisor. Please have the following information available to facilitate service.

1. Product serial number

2. Product model number

3. Your company and contact information

You may contact your customer service advisor by:

E-Mail: Helpdesk@racalinstruments.com

Telephone: +1 800 722 3262 (USA)

+44(0) 8706 080134 (UK)

+852 2405 5500 (Hong Kong)

Fax: +1 949 859 7309 (USA)

+44(0) 1628 662017 (UK)

+852 2416 4335 (Hong Kong)

RETURN of PRODUCT

Authorization is required from Racal Instruments before you send us your product for service or calibration.

Call your nearest Racal Instruments support facility. A list is located on the last page of this manual. If you are

unsure where to call, contact Racal Instruments, Inc. Customer Support Department in Irvine, California, USA

at 1-800-722-3262 or 1-949-859-8999 or via fax at 1-949-859-7139. We can be reached at:

helpdesk@racalinstruments.com.

PROPRIETARY NOTICE

This document and the technical data herein disclosed, are proprietary to Racal Instruments, and shall not,

without express written permission of Racal Instruments, be used, in whole or in part to solicit quotations from

a competitive source or used for manufacture by anyone other than Racal Instruments. The information herein

has been developed at private expense, and may only be used for operation and maintenance reference

purposes or for purposes of engineering evaluation and incorporation into technical specifications and other

documents which specify procurement of products from Racal Instruments.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

FOR YOUR SAFETY

Before undertaking any troubleshooting, maintenance or exploratory procedure, read carefully the

WARNINGS and CAUTION notices.

This equipment contains voltage hazardous to human life and safety, and is capable of inflicting

personal injury.

If this instrument is to be powered from the AC line (mains) through an autotransformer, ensure

the common connector is connected to the neutral (earth pole) of the power supply.

Before operating the unit, ensure the conductor (green wire) is connected to the ground (earth)

conductor of the power outlet. Do not use a two-conductor extension cord or a three-prong/two-

prong adapter. This will defeat the protective feature of the third conductor in the power cord.

Maintenance and calibration procedures sometimes call for operation of the unit with power

applied and protective covers removed. Read the procedures and heed warnings to avoid “live”

circuit points.

Before operating this instrument:

1. Ensure the instrument is configured to operate on the voltage at the power source. See

Installation Section.

2. Ensure the proper fuse is in place for the power source to operate.

3. Ensure all other devices connected to or in proximity to this instrument are properly grounded or

connected to the protective third-wire earth ground.

If the instrument:

- fails to operate satisfactorily

- shows visible damage

- has been stored under unfavorable conditions

- has sustained stress

Do not operate until performance is checked by qualified personnel.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

This page was left intentionally blank.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6/98 Addendum Page 1

NOTE FOR SYSTEMS WITH 1260-OPT 01T

The “Module-Specific Syntax” section of this manual shows the command syntax for the 1260-01S

Smart Card. If you are using the newer 1260-01T Smart Card, the commands will NOT work as

shown.

Consult the 1260-01T Manual for a description of the commands which may be used with the 1260-

01T Smart Card.

The channel numbers described in this manual are valid for the 1260-01T. The channel

numbers continue to be used for the 1260-01T.

The syntax of the commands which use channel numbers has changed for those cards

controlled by the 1260-01T.

The new syntax used to close a channel is:

CLOSE (@ <module address> ( <channel> ) )

For example, with for a relay module whose <module address> is set to 7, closing

<channel> 0 is performed with the command:

CLOSE (@ 7 (0))

Using the older 1260-01S, the command would be (as shown in this manual):

CLOSE 7.0

Many other command syntax differences exist. Please consult chapter 2 of the 1260-01T

manual for a description of the commands which are available for the 1260-01T.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6/98 Addendum Page 2

Control Information for the 1260-60

The following information describes the control-register-to-relay-channel mapping for a 1260-60 Relay

Module. This information may be used to control a 1260-60 when using a 1260-01T in the register-based

mode of operation.

There are two types of relays which populate the 1260-60 module. The standard relays (channels 0 through

111), are each controlled by a single bit within an 8-bit Control Register. Each of these relays is controlled by

setting or clearing a single bit within a Control Register. Control Registers on the module operate 8 channels

simultaneously. There are eight control bits per Control Register. Setting the bit to a 1 closes the relay;

setting the bit to a 0 opens the relay.

The RF relays (channels 200, 201, and 202) are each controlled by 2 bits. Each of these relays is a latching

relay. One bit is pulsed to set the relay to the OPEN state, in which the COM output is connected to the

normally closed input. A different bit is pulsed to set the relay to the CLOSED state, where the COM output is

connected to the normally open input. An OPEN or CLOSE control bit must be set high for a minimum of

15 milliseconds before it is deasserted to ensure that the latching relay is actuated.

The table below shows the mapping from logical channels to control bits. The logical channels are used

when operating the relay module in message-based mode. The control bits within the Control Registers are

used to operate the module in register-based mode.

Each Control Register is located 2 addresses from the previous Control Register. That is, each Control

0 is located at the “Base A24 Address” for the module. Consult the “Register-Based Operation” Section of

Chapter 2 of the 1260-01T manual for a description of calculating control register addresses.

Channel Control Register Control Bit

003

107

213

317

423

527

633

737

802

906

10 1 2

11 1 6

100 0 1

101 0 5

102 1 1

103 1 5

104 2 1

105 2 5

106 3 1

107 3 5

108 0 0

109 0 4

110 1 0

111 1 4

200 4 0 (CLOSE)

1 (OPEN)

201 4 2 (CLOSE)

3 (OPEN)

202 4 4 (CLOSE)

5 (OPEN)

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

User Manual 1260-60A/B

Table of Contents

Chapter 1

INTRODUCTION.........................................................................................................................1-1

1260-60A/B Module Specification..............................................................................................1-1

Specifications............................................................................................................................1-2

1X12 Switch Arrays Specifications ............................................................................................1-3

General .....................................................................................................................................1-4

Chapter 2

INSTALLATION INSTRUCTION..................................................................................................2-1

Unpacking and Inspection.........................................................................................................2-1

Reshipment Instructions............................................................................................................2-1

Option 01 Installation.................................................................................................................2-1

Module Installation.....................................................................................................................2-1

Relay Bank Configuration..........................................................................................................2-2

Sink/Source Configuration.....................................................................................................2-2

Power - Bank A......................................................................................................................2-2

Power - Bank B......................................................................................................................2-2

Chapter 3

MODULE SPECIFIC SYNTAX.....................................................................................................3-1

1260-60A/B Syntax....................................................................................................................3-1

Commands ............................................................................................................................3-2

OPEN.................................................................................................................................3-2

CLOSE...............................................................................................................................3-2

PDATAOUT........................................................................................................................3-2

PSETUP.............................................................................................................................3-3

SETUP...............................................................................................................................3-3

Standard Features.................................................................................................................3-3

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

User Manual 1260-60A/B

Chapter 4

CONNECTOR PIN CONFIGURATION........................................................................................ 4-1

RF Relays ................................................................................................................................. 4-1

Relay Banks.............................................................................................................................. 4-1

Chapter 5

THEORY OF OPERATION.......................................................................................................... 5-1

PCB Assemblies ....................................................................................................................... 5-1

Chapter 6

DRAWINGS ................................................................................................................................ 6-1

Chapter 7

PARTS LIST................................................................................................................................ 7-1

Chapter 8

OPTIONAL HARNESS ASSEMBLIES......................................................................................... 8-1

Chapter 9

PRODUCT SUPPORT.................................................................................................................9-1

Product Support........................................................................................................................ 9-1

Reshipment Instructions............................................................................................................ 9-1

Support Offices......................................................................................................................... 9-2

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

User Manual 1260-60A/B

iii

List of Figures

Figure 1-1, 1260-60 ......................................................................................................................1-1

Figure 4-1, 1260-60A/B Front Panel .............................................................................................4-2

Figure 4-2, Relay Bank Pin Configuration.....................................................................................4-3

Figure 4-3, Internal Supply Sink Driver Example...........................................................................4-4

Figure 4-3, External Supply Sink Driver Example..........................................................................4-4

Figure 4-3, Internal Supply Source Driver Example ......................................................................4-5

Figure 4-3, External Supply Source Driver Example .....................................................................4-5

List of Tables

Table 4-1, 1260-60A,B Pin Assignments ......................................................................................4-3

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Racal Instruments Netzwerk-Hardware Handbücher

Racal Instruments

Racal Instruments 1260 VXI Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung