RADEMACHER Troll Basic 5602 Bedienungsanleitung
VBD 599-2 (01.21)
Item no. 3650 01 12 (ultra-white)
EN
Troll Basic 5602
Instruction manual for the electrical connection and for commissioning
Type: 5602
2
EN
i
Contents
1. These instructions..............................................................4
1.1 Application of this manual................................................................4
2. Hazard symbols ..................................................................5
2.1 Levels of danger and signal words.................................................5
2.2 Symbols and depictions used..........................................................6
3. Safety Instructions .............................................................7
3.1 Intended Use..........................................................................................8
3.2 Incorrect Use..........................................................................................8
3.3 Required Expert Knowledge of the Installer ..............................9
3.4 Glossary - Definition............................................................................9
4. Included in delivery ........................................................ 10
5. General View of the Operating Unit............................. 11
5.1 General View of the Installation Housing................................. 13
5.2 Electrical connections...................................................................... 14
5.3 Function of the buttons and LEDs............................................... 15
6. Product Description........................................................ 16
6.1 Compatible switches........................................................................ 17
6.2 Overview of Features....................................................................... 18
7. Technical Specifications................................................. 19
7.1 Factory Settings ................................................................................. 22
7.2 Conduct in the event of power failure....................................... 22
8. Important information prior to electrical
installation and mounting............................................. 23
9. Safety Instructions for the Electrical Connection ..... 24
9.1 Connecting a tubular motor ......................................................... 27
9.2 Connection Diagram with Tubular Motor ................................ 28
10. Installation after the Electrical Connection ............... 29
3
EN
Contents
i
11. Connecting a light sensor*............................................ 30
11.1 Light sensor connection when using the supplied frame . 30
11.2 Light sensor connection when using a frame
supplied by a third-party manufacturer ................................... 32
11.3 Dismantling the light sensor......................................................... 33
12. Important Information regarding the
Commissioning................................................................ 34
13. Manual Operation ........................................................... 35
14. Automatic mode.............................................................. 36
14.1 Switch all automatic functions on / off simultaneously;
Auto/Manu switchover.................................................................... 36
15. Automatic timer .............................................................. 37
15.1 Configuring an opening and closing time............................... 38
15.2 Switching the automatic timer on / off..................................... 39
16. Automatic solar function............................................... 40
16.1 Automatic solar function; configuring sensitivity ................. 42
17. Automatic dusk function ............................................... 44
17.1 Automatic dusk function; configuration of sensitivity ........ 46
18. Dimming the LEDs .......................................................... 48
19. Hardware Reset in the event of Unit Failure .............. 49
20. Erase all Settings, Software Reset ................................ 50
21. Dismounting .................................................................... 51
22. Simplified EU Declaration of Conformity.................... 52
23. Accessories ....................................................................... 52
24. Warranty Conditions....................................................... 53
4
EN
i
1. These instructions...
...describe how to install, connect and operate theTroll Basic 5602.
1.1 Application of this manual
◆Before you begin, please read this manual through completely
and follow all the safety instructions.
◆Please also read the instruction manuals of the accessories,
if available, as well as the instructions of the respective
connected appliance.
◆This manual is a component of the product.
Please store it in an easily accessible place.
◆When passing the Troll Basic 5602 on to a third party,
this manual must be passed on as well.
◆Damage resulting from non-compliance with these
instructions and safety instructions will void the guarantee.
We assume no liability for any consequential damage.
i
5
EN
i
2. Hazard symbols
The following hazard symbols are used in this instruction
manual:
Danger of fatal electric shock
Danger area / dangerous situation
2.1 Levels of danger and signal words
DANGER!
This hazard will lead to serious injury or death if not avoided.
WARNING!WARNING!
This hazard may result in serious injury or death if not avoided.
CAUTION!
This hazard may result in minor or moderate injury if not avoided.
ATTENTION!
This hazard may lead to property damage.
i
6
EN
2.2 Symbols and depictions used
Depiction Description
1. Procedures
2.
◆Itemisation
1) or a) Lists
i
further useful
information
Please read the
respective manual
Indicator light flashes red
Indicator light lights up red
Indicator light is off
i
7
EN
3. Safety Instructions
The use of defective equipment can lead to personal injury
and damage to property (electric shocks / short circuiting).
◆Never use defective or damaged equipment.
◆Check the Troll Basic beforehand for damage.
◆Consult our customer service department in the event that
you discover damage, see page 54.
Incorrect use leads to an increased risk of injury.
◆Train all personnel to use the Troll Basic safely.
◆This device may be used by children from 8 years of age
upwards as well as by persons with reduced physical,
sensory or mental capacities or with lack of experience and
knowledge if they are supervised or have been instructed
on how to use the device safely and if they understand
what dangers may resulted from this.
◆Children must not play with the device.
◆Never remove the operating unit from the installation
housing during operation.
i
8
EN
3.1 Intended Use
Only use the Troll Basic 5602 for connecting and controlling
a tubular motor for:
◆Roller Shutters
◆Awnings
Operating conditions
◆Only operate the Troll Basic 5602 in dry rooms.
◆A 230 V / 50 Hz power supply, together with a site-provided
disconnecting device (fuse), must be available at the
installation location.
◆The tubular motor must be fitted with a mechanical or
electronic end position switch.
3.2 Incorrect Use
Using the Troll Basic 5602 for any other purpose than previously
mentioned is not permissible.
Improper use can lead to serious injuries or property
damage.
◆TheTroll Basic 5602 is not suitable to be used for an electrically
safe disconnection of the connected appliances.
There is a risk to life caused through short circuiting and
electric shocks if the troll Basic 5602 is used outside or in
damp rooms.
◆Do not install and use the Troll Basic 5602 outdoors or in
damp rooms.
i
i
9
EN
3.3 Required Expert Knowledge of the Installer
The electrical connection, installation and commissioning of the
Troll Basic 5602 must only be carried out by a qualified electrician
in accordance with the instructions in this manual.
3.4 Glossary - Definition
UW
◆UW = ultra-white (device colour)
DIN 49075
◆German Standard "Cover panels for installations devices for
building into device boxes...".
i
i
10
EN
i
4. Included in delivery
Included in delivery
a) 1 x Operating unit (50 x 50 mm)
b) 1 x Frame
c) 1 x Installation housing
d) 1 x Spacer frame, see page 32
e) 1 x Instruction manual (not illustrated)
After unpacking please check and compare...
... the contents of the package with the above specified.
*) Accessories, optionally available, see page 52
Light sensor
a)
b) c)
d)
*)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere RADEMACHER Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
