Radial Engineering J-Rak R800 1015 Bedienungsanleitung

Congratulations on your purchase of the Radial J-Rak. The J-Rak is a 19" rack adaptor

that has been designed to work with products like the Radial JDI, Radial J48 and the

many other Radial products that employ the same compact bookend design.

As with all Radial products, the J-Rak features heavy duty 14-gauge steel construction

and a baked enamel finish that should provide you with years of trouble free performance.

The J-Rak is also supported with the Radial 3-year warranty to protect against

manufacturing defects.

Although the J-Rak is a simple device, we invite you to take a few moments to read

through this manual and familiarize yourself with some of the unique features that we

have built into this simple yet extremely versatile device.

Should you have any questions or comments, please feel free to contact us by sending us

an email at [email protected]. We recommend that you browse our web site at

www.radialeng.com for the latest updates or applications.

Enjoy!

Radial J-Rak

19” Rack Mount Adapter Shelf

Part #R800 1015

True to the Music

www.radialeng.com

Radial Engineering

1638 Kebet Way, Port Coquitlam BC V3C 5W9

tel: 604-942-1001 • fax: 604-942-1010

email: [email protected] web: www.radialeng.com

Radial Engineering is a division of JP CableTek Electronics Ltd.

Operator’s Manual

Radial Engineering J-Rak Operator’s Manual

1. PRODUCT DESCRIPTION

The Radial J-Rak is essentially an upside down shelf that has been designed to work with Radial

products such as the JDI and J48, allowing as many as eight of these to be rack-mounted in a

standard 19" rack system. The J-Rak requires 2 rack spaces (3 ½”).

The J-Rak was originally designed to allow touring companies to make better use of their DI box

inventory by allowing stand-alone units to be converted to rack mounted DIs for applications

such as keyboards and electronic drums. With the recent addition of the Radial JS-2 two-way and

JS-3 three-way mic splitters, it is now possible to create a variety of custom rack options for

touring, permanent installations or studio.

2. STANDARD EQUIPMENT

The J-Rak comes complete with the rack-shelf and eight

(8) insert sleeves. These resemble the book-end outer

shells that are common to all Radial compact direct boxes

and splitters. The difference being is that these shells

are slightly smaller and feature threaded screw holes to

fit the J-Rak.

The J-Rak itself features a series of wax pencil writing

ID strips to allow the engineer to assign and label the

eight channels. This simple feature makes channel

identification easy while also simplifying trouble

shooting on busy stages.

NOTE: Before writing on the ID strips, we suggest that you test a small section to make sure

that the pencil you are using will not react with the paint. Although most wax pencils and dry

erase pencils seem to work, some may mar the finish or be difficult to erase. As we are unable to

test all brands, we cannot assure all erasable markers will work.

3. SETTING THE J-RAK

To begin, remove the protective ‘book-end’ shells by

unscrewing the four (4) hex screws on each of the Radial

devices that you intend to rack mount.

All Radial products employ a standard hardened 6/32"

hex screws. Do not discard these screws as these are

used to reinstall the smaller outer shells that come with

your J-Rak.

True to the Music

The J-Rak is unique in that it allows one to install the

direct box or splitter module ‘frontward’ or ‘backward’

depending on the system designer’s need. Before you

bolt the new assembly into the J-Rak, take a moment to

think about how you will be connecting your gear. For

instance, when using the J-Rak with a keyboard rack, you

may find it best to have the ¼” jacks on the inside of the

rack to make hooking up to rack-mounted sound modules

and samplers easier.

To add even more versatility, you may order factory made

Radial rack-panels that act as extensions for front or rear

19" rack mounting. Please contact your Radial dealer for

more details.

This photo shows a J-Rak with 8 modules installed.

Radial Engineering J-Rak Operator’s Manual

When tightening, make sure you get a nice snug fit but

do not overtighten as this will only make removing the

device more difficult later on.

Installation is easy - slide the Radial module into place

and affix the modules to the J-Rak top shelf with the

supplied hex screws.

Install the smaller J-Rak shells. Be careful not to

strip the screws or pem-nuts. Note that the XLR

connection is always on the bottom.

True to the Music

RADIAL LIMITED THREE YEAR WARRANTY

Radial Engineering - a division of JP CableTek Electronics Ltd. ("Radial") warrants this product to be free

from defects in material and workmanship to the original owner and will remedy any such defects free of

charge according to the terms of this warranty. Radial will repair or replace at its option any defective

component(s) of this product, excluding the finish, wear and tear on components under normal use, and

the tube and footswitch (which are warranted for 90 days), for a period of three (3) year from the original

date of purchase. In the event that a particular product is no longer available, Radial reserves the right to

replace the product with a similar product of equal or greater value. To make a request or claim under this

limited warranty, the product must be returned prepaid in the original shipping container (or equivalent)

to Radial or to an authorized Radial repair centre and you must assume the risk of loss or damage. A copy

of the original invoice showing date of purchase and the dealer name must accompany any request for

work to be performed under this limited warranty. This limited warranty shall not apply if the product has

been damaged due to abuse, misuse, misapplication, accident or as a result of service or modification by

any other than an authorized Radial repair centre.

THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND

DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT

NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD

DESCRIBED ABOVE OF ONE YEAR.

RADIAL SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL OR INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. THIS

WA R R A N T Y G I V E S Y O U S P E C I F I C L E G A L R I G H T S , A N D Y O U M AY A L S O H AV E O T H E R R I G H T S ,

WHICH MAY VARY, FROM STATE/PROVINCE TO STATE/PROVINCE.

www.radialeng.com

True to the Music

Radial Engineering

1638 Kebet Way, Port Coquitlam, BC V3C 5W9

tel: 604-942-1001 • fax: 604-942-1010

email: [email protected] • web: www.radialeng.com

Radial Engineering is a division of JP CableTek Electronics Ltd.

Radial J-Rak Operator’s Manual • V1 07-30-03 (Ref # R800 9645 00)

Radial Engineering J-Rak Operator’s Manual

Andere Radial Engineering Adapter Handbücher

Radial Engineering

Radial Engineering BT-PRO Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung