Version 1.0 - August 2022 3
User manual SDM Battery Series
!
!
SDM Battery Series torque wrenches are reversible, non-impacting, torque controlled tightening tools and must
always be operated with the following:
• Fully charged battery
• Impact sockets with locking pin and o-ring
• Proper reaction arm with retaining ring.
1. General instruc� ons
2. Assembly
NOTE: Do not operate the tool before reading these instructions. If breakdown, malfunction or damage
occurs, do not attempt to repair, please contact Radial Torque Tools B.V. immediately.
1. Make sure the battery is fully charged.
2. Slide in the battery pack until it engages.
3. Fasten and secure the reaction arm on the jagged side of the gearbox with the retaining ring.
NOTE: These torque wrenches contain metal components that can be dangerous in hazardous areas.
Thank you for purchasing this ne Radial product! We highly recommend reading this user manual
thoroughly in order to understand all aspects of these tools. All tool features, our safety instructions and
tool maintenance are explained in detail.
Familiarizing yourself with all the ins and outs of this tool will ensure a long lifetime of the tool and a happy
operator.
On our website you can download the latest software for your Radial tool and you can nd additional
product information such as product videos. See: www.radialtorque.eu.
If you can have further questions, feel free to contact us by phone or e-mail.
Thank you,
The Radial Team
6. To remove the reaction arm,
place a screwdriver at the
beginning of the retaining ring
and spread the retaining ring
open. Then pull the retaining ring
o and remove the reaction arm.
5. Then gradually press the
retaining ring until it is completely
closed.
4. Spread the retaining ring open
with a screwdriver and place the
open side in the groove at the end
of the gearbox.
Introduction
