Radio Shack 23-416 Bedienungsanleitung

Cat. No. 23-416

OWNER’S MANUAL

Please read before using this equipment.

AC Char

for Ni-Cd/Ni-MH

RC Battery Packs

23-416.fm Page 1 Friday, August 6, 1999 3:08 PM

FEATURES

Your RadioShack AC Charger is perfect for charging remote-

controlled racing car batteries. It can fully charge a 4.8-volt,

6.0-volt, 7.2-volt, or 9.6-volt nickel-cadmium or nickel-metal

hydride battery pack in as little as one hour! (High-capacity

7.2-volt, 2000 mAh Ni-Cd and 9.6-volt, 1250 mAh Ni-MH bat-

tery packs require 11/2–2 hours to fully charge.)

Your Universal Charger’s features include:

Automatic Battery Type Selection — automatically selects

the battery type when you snap the battery into the charger’s

battery compartment, for foolproof charging.

Charge Indicator — lights when the battery pack is charging,

automatically turns off when the battery pack finishes charg-

ing, and flashes if battery pack fails to charge, indicating a

problem with the battery (the battery is not properly connect-

ed, needs to be replaced, or there is a short, for example).

Short Circuit Protection — prevents damage if the charging

jack is accidentally shorted.

Safety Guard Protection Timer — prevents overcharging

that can damage the battery pack.

RadioShack is a registered trademark used by Tandy Corporation.

23-416.fm Page 2 Friday, August 6, 1999 3:08 PM

This symbol is intended to alert you to the presence of un-

insulated dangerousvoltage within the charger’s enclosure

that might be of sufficient magnitude to constitute a risk of

electric shock. Do not open the charger’s case.

This symbol is intended to inform you that important oper-

ating and maintenance instructions are included in the liter-

ature accompanying this charger.

Not recommended for outdoor use.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of

fire or shock hazard, do not ex-

pose this product to rain or mois-

ture.

CAUTION !

23-416.fm Page 3 Friday, August 6, 1999 3:08 PM

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

DANGER: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.

This manual contains important safety and operating instruc-

tions for this battery charger. Before you use the battery

charger, read all the instructions and cautionary markings in

this manual and on the battery charger, the battery, and the

product that uses the battery.

Warnin

: To reduce the risk of injury:

• Charge only nickel-cadmium and nickel-metal hydride

rechargeable batteries. Other types of batteries could

burst, causing personal injury and damage.

• Unplug the charger from the outlet before attempting any

maintenance or cleaning.

• Do not disassemble the charger; take it to a qualified

service technician when service or repair is required. Im-

proper reassembly may result in a risk of electric shock

or fire.

• Do not use an attachment not recommended or sold by

RadioShack as this could result in a risk of fire, electric

shock, or injury to persons.

Caution: To reduce the risk of damage:

• Do not expose the charger to rain or excessive moisture.

• Do not operate the charger if it has been dropped or

damaged in any way. Take it to a qualified service techni-

cian for repair.

• Do not operate the charger with a damaged cord or plug

— replace them immediately. To reduce the risk of dam-

age to the electric plug and cord:

–Make sure the cord is not located where it will be stepped

on, tripped over, or otherwise subjected to damage or stress.

–Disconnect the charger by pulling the cord’s plug rather than

the cord.

23-416.fm Page 4 Friday, August 6, 1999 3:08 PM

OPERATION

Always use a battery pack until it can no longer provide the

necessary power, then recharge it.

Cautions:

• This charger works only with 4.8-volt, 6.0-volt, 7.2-volt

and 9.6-volt nickel-cadmium/nickel-metal hydride cord-

connected or cartridge battery packs. Charging another

type of battery pack could damage the battery pack or

the charger.

• Avoid charging fully-charged battery packs. Doing so

can damage the battery pack or cause it to lose some of

its storage capacity.

• Use the charger only in an area that is at room tempera-

ture (65–80×F). Charging battery packs in hot areas can

permanently reduce the battery pack’s power capacity.

• To protect battery packs, allow them to cool for 20 min-

utes before recharging them.

• Charge only one battery pack at a time.

CHARGING A CORD-CONNECTED

BATTERY PACK

Warnin

: Connect or disconnect the battery connector only

when the charger’s AC cord is disconnected. Otherwise, the

battery connector might arc and burn.

1. Insert the battery connector of the battery pack you want

to charge into CHARGING JACK.

illus of CHARGING

JACK location with

battery pack connector

23-416.fm Page 5 Friday, August 6, 1999 3:08 PM

Notes:

• If the connector does not fit, turn it over and try again.

Do not force it.

• To charge a 4.8-volt cord-connected battery pack,

plug the small end of the supplied adapter cord fully

into the battery pack’s connector. Then plug the adapt-

er cord’s large end fully into the CHARGING JACK.

2. Insert the battery pack into the charger’s large compart-

ment. Make sure that the battery pack makes contact

with the voltage selector sensor and the two latches at

the bottom of the compartment.

Note: Do not insert a cartridge battery pack while charg-

ing a cord-connected battery pack, otherwise, the cord-

connected battery pack will not charge.

3. Plug the charger’s cord into a standard AC outlet. After a

few seconds, the charger automatically selects the ap-

propriate charging current and charging begins.

Notes:

• The CHARGE indicator lights when the battery pack is

charging and automatically turns off when the battery

pack finishes charging, and flashes if the battery pack

illus of 4.8 volt

battery pack connection

illus of battery pack

insertion

23-416.fm Page 6 Friday, August 6, 1999 3:08 PM

fails to charge.

• If the battery pack you want to charge is a new one or

has not been used for more than 3 months, leave it in

the charger for 24 hours, even if the CHARGE indica-

tor turns off.

• If the CHARGE indicator flashes, check the battery

connection. If it still flashes, the battery pack might

need to be replaced or there might be a short in the

CHARGING JACK. Try charging a different battery

pack. If the charger still does not work, disconnect it

from power and take it to your local RadioShack for

assistance.

• The CHARGE indicator lights flash after five minutes if

a short to the CHARGING JACK is detected.

4. When the CHARGE indicator turns off, unplug the charg-

er’s AC cord from the outlet, then disconnect the battery

pack.

illus of CHARGE indicato

location

23-416.fm Page 7 Friday, August 6, 1999 3:08 PM

CHARGING A STANDARD CARTRIDGE

BATTERY PACK

To charge a standard cartridge battery pack, simply insert the

battery pack in the CARTRIDGE compartment, then press it

down firmly to ensure thebattery packmakes contact with the

metal pins at the bottom of the compartment.

Caution: Do not force the battery pack. If the cartridge does

not fit, turn it over and try again.

23-416.fm Page 8 Friday, August 6, 1999 3:08 PM

SPECIFICATIONS

Input Voltage ................................... AC 120 V ±10%, 60 Hz

Charging Current for Battery Packs

Cord-Connected 7.2V ........................... DC 1.5 A ±10%

Cord-Connected 4.8V/9.6V .................. DC 0.8 A ±10%

Cartridge 4.8V/6.0V/7.2V/9.6V ............. DC 0.8 A ±10%

Constant Trickle Charge Current

(All Battery Types) .......................................... 30 mA ±7 mA

Safety Guard Protection Timer ..... 130 minutes ±10 minutes

Rated Power ................................................................. 60W

Specifications are typical; individual units might vary. Specifi-

cations are subject to change and improvement without no-

tice.

23-416.fm Page 9 Friday, August 6, 1999 3:08 PM

CARE AND MAINTENANCE

Your RadioShack AC Universal Charger is an example of su-

perior design and craftsmanship. The following suggestions

will help you care for your charger so you can enjoy it for

years.

Keep the charger dry. If it gets wet, wipe it dry im-

mediately. Liquids might contain minerals that

can corrode the electronic circuits.

Use and store the charger onlyin normal temper-

ature environments. Temperature extremes can

shorten the life of electronic devices, and distort

or melt plastic parts.

Keep the charger away from dust and dirt, which

can cause premature wear of parts.

Handle the charger gently and carefully. Drop-

ping it can damage circuit boards and cases and

can cause the charger to work improperly.

Wipe the charger with a damp cloth occasionally

to keep it looking new. Do not use harsh chemi-

cals, cleaning solvents, or strong detergents to

clean the charger.

Modifying or tampering with the charger’s internal compo-

nents can cause a malfunction and might invalidate its war-

ranty. If your charger is not performing as it should, take it to

your local RadioShack store for assistance.

23-416.fm Page 10 Friday, August 6, 1999 3:08 PM

Inhaltsverzeichnis

Andere Radio Shack Akkuladegerät Handbücher

Radio Shack

Radio Shack 23-422 Bedienungsanleitung

Radio Shack

Radio Shack 23-437 Bedienungsanleitung

Radio Shack

Radio Shack 23-401 Bedienungsanleitung

Radio Shack

Radio Shack Racing Battery Pack DC Charger Bedienungsanleitung

Radio Shack

Radio Shack 23-418 Bedienungsanleitung

Radio Shack

Radio Shack Universal Battery Pack Conditioner/Charger Bedienungsanleitung

Radio Shack

Radio Shack 23-428 Bedienungsanleitung

Radio Shack

Radio Shack 0904-211-18801 Bedienungsanleitung

Radio Shack

Radio Shack 23-427 Bedienungsanleitung

Radio Shack

Radio Shack 23-436 Bedienungsanleitung

Radio Shack

Radio Shack 20 Hour 9.6 V Ni-Cd/NI-MH Battery Pack... Bedienungsanleitung

Radio Shack

Radio Shack 23-043 Bedienungsanleitung

Radio Shack

Radio Shack RC Car Battery Universal Fast Charger Bedienungsanleitung

Radio Shack

Radio Shack 23-228 Bedienungsanleitung

Radio Shack

Radio Shack 17-6025 Bedienungsanleitung

Radio Shack

Radio Shack 23-402 Bedienungsanleitung

Radio Shack

Radio Shack 23-348 Bedienungsanleitung

Radio Shack

Radio Shack 23-038 Bedienungsanleitung

Radio Shack

Radio Shack Twin Charger for Startac Cellular Phones Bedienungsanleitung

Radio Shack

Radio Shack Ni-Cd/Ni-MH Universal Battery Charger Bedienungsanleitung

Radio Shack

Radio Shack AA Travel Charger Pack Bedienungsanleitung

Radio Shack

Radio Shack Battery Charger Bedienungsanleitung

Radio Shack

Radio Shack Twin RC Bedienungsanleitung

Radio Shack

Radio Shack 23-410 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung