Radio Shack 23-410 Bedienungsanleitung

Cat. No. 23-410

OWNER’S MANUAL

Please read before using this equipment.

Ni-Cd and Nickel Metal H

dride

Rechar

eable Batter

Pulse Char

23-410.fm Page 1 Friday, August 6, 1999 2:54 PM

FEATURES

Your RadioShack Ni-Cd and Nickel Met-

al Hydride Rechargeable Battery Pulse

Charger lets you quickly charge five dif-

ferent sizes of standard nickel-cadmium

(Ni-Cd) or nickel-metal hydride (Ni-MH)

batteries.

The charger’s four battery chambers let

you charge up to four batteries of the

same size and type — AAA, AA, C, or D

— at the same time, while the connector

inside the charger lets you also charge

one 9V battery.

Your charger has these features:

Intelli

ent Dischar

e S

stem (IDS) —

automatically discharges and conditions

cells to a suitable level before recharg-

ing, to ensure maximum charging ca-

pacity.

Microprocessor Controlled Char

— automatically detects the battery type

and monitors the charging process to

ensure the right amount of current is

supplied.

Soft-Start Char

— gradually in-

creases charging current when batteries

start charging to avoid heat build-up that

can reduce battery life.

Fuzz

ic Intelli

ent Char

Cur-

rent Control — automatically senses

when a battery is fully charged and

switches first to top-off, then trickle-

charge, to prevent overcharging.

Red LED Indicator — shows 9V battery

charging status.

Liquid Cr

stal Displa

— shows AAA,

AA, C, or D-size battery charging status.

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of

fire or shock hazard, do not ex-

pose this product to rain or mois-

ture.

RadioShack is a registered trademark used by Tandy Corporation.

23-410.fm Page 2 Friday, August 6, 1999 2:54 PM

SAFETY INSTRUCTIONS

SAVE THESE

INSTRUCTIONS

This manual contains important safety

and operating instructions for your

charger.

Before you use the battery charger, read

all instructions and cautionary markings

on the charger, the batteries to be

charged, and the products that use the

batteries.

Warnin

• To reduce the risk of injury, charge

only nickel-cadmium or nickel-metal

hydride batteries with this charger.

Other types of batteries might burst,

causing personal injury and damage

to the charger.

• To prevent damage to your charger

and risk of electric shock, always

unplug the AC adapter from the AC

outlet before you plug it into or

unplug it from the charger.

• Do not expose the charger to rain or

excessive moisture.

• Use of any attachments not

intended for use with this battery

charger can result in a risk of fire,

electric shock, or personal injury.

• Never operate the charger if it has

received a sharp blow or been

dropped or damaged in any way.

Have it repaired by qualified service

personnel.

• Do not disassemble the charger.

Have it serviced or repaired by qual-

ified service personnel only. Incor-

rect assembly can result in a risk of

electric shock or fire.

• To reduce the risk of electric shock,

unplug the charger from the outlet

before attempting any maintenance

or cleaning.

• To reduce the risk of damage to the

AC adapter, disconnect the charger

by pulling the plug rather than the

cord.

• Do not use an extension cord. Its

use could result in fire or electric

shock.

• Do not operate the charger if the AC

adapter is damaged. Have the

charger repaired by qualified service

personnel.

• Never alter the provided AC

adapter. If it does not fit in the AC

outlet, have a qualified technician

install the proper outlet. Improper

connection can result in an electric

shock.

• Never use the charger as a DC

power source for any electrical

equipment.

23-410.fm Page 3 Friday, August 6, 1999 2:54 PM

OPERATION

CHARGING HINTS

To see what is happening while your

charger is charging AAA, AA, C, or D-

size batteries, watch for these symbols

to appear on the charger’s display.

Cautions:

• Remove all batteries from the

charger at least 3 seconds before

connecting the charger to AC power.

Failure to do so might cause the

charger to lock up during the power

up cycle. If this happens, disconnect

power, remove the batteries, then

reconnect power.

• All batteries loaded into the

charger’s chambers must be of the

same size and type.

• Do not try to charge a battery of a

size other than those listed in this

manual. Doing so could damage the

batteries and charger.

• Before unplugging the adapter from

the AC outlet, remove the batteries

to prevent leakage that will damage

the charger.

Load Reminds you to

load batteries.

Numeric Di

its show bat-

tery volta

Bad Battery If a battery is bad

or should not be

char

ed, both

and appear.

Power Appears durin

trickle char

when batteries are

almost fully

char

ed.

Intelligent

Discharge

System (IDS)

Durin

battery dis-

char

appears steadily

with blinkin

Soft-Start Durin

soft-start,

appears

steadily and

blinks.

FastCharge Durin

fast char

, appears

steadily and

blinks.

Top-off/

Trickle Durin

top-off or

trickle char

appears

steadily with

and alternately

blinkin

Amount of

Charge The bars illus-

trate the char

process and scan

inside the amount-

of-char

e symbol

(except durin

top-

off/trickle char

). The more

bars that appear

while a battery is

bein

analyzed,the

more char

e there

is in the battery.

23-410.fm Page 4 Friday, August 6, 1999 2:54 PM

CONNECTING POWER

Before connecting power, remove all

batteries from the charger. Insert the

supplied adapter’s barrel plug into the

DC 12V 500 mA jack on the back of the

charger. Then plug the other end of the

adapter into a standard AC outlet. 00

appears and flashes on the display.

OPENING THE COVER

To open the cover, press the tab below

the cover and lift up the cover.

CHECKING 1.2V

BATTERIES

You can use this charger to check the

charge in a 1.2V Ni-Cd/Ni-MH battery.

(You cannot use this function to check

the voltage of a 9V battery.)

1. With the charger connected to AC

power, place a single battery into

any chamber. Do not close the

cover yet (this starts the charging

process).

2. Press ANALYZE.

The charger dis-

plays the estimated

charge level, with

the amount-of-

charge symbol and

the numeric charac-

ters showing the

voltage.

Notes:

• The amount-of-charge shown is

based on the normal discharging

curve of a fully charged battery. It

might be inaccurate if the battery

being checked was not fully

charged before it was last used.

23-410.fm Page 5 Friday, August 6, 1999 2:54 PM

• If the battery is unsuitable for

charging, appears on the dis-

play. Do not attempt to charge a

bad battery. At the end of a nickel-

cadmium or nickel-metal hydride

battery’s useful life, it must be

recycled or disposed of properly.

Contact your local, county, or

state hazardous waste manage-

ment authorities for information

on recycling or disposal programs

in your area. Some options that

might be available are: municipal

curbside collection, drop-off

boxes at retailers such as your

local RadioShack store (nickel-

cadmium only), recycling collec-

tion centers, and mail-back pro-

grams.

• The checking process drains cur-

rent from batteries. Therefore,

repeatedly checking the same

batteries decreases their voltage.

3. To check another battery, repeat

Steps 1 and 2. To charge the bat-

tery, see “Charging AA/AAA/C/D

Batteries.”

CHARGING AA/AAA/C/D

BATTERIES

This graph shows the estimated typical

fast-charging time for different sizes of

batteries. Note that charging times in-

crease when more than one battery is

charged.

Note: Charging times are typical; actual

charging times might vary. The built-in

Fuzzy Logic Control automatically deter-

mines the optimal charging current,

which in turn determines the charging

time.

1. After connecting power to the

charger, open the cover and place

up to four AAA, AA, C, or D batteries

in the charger, one battery per

chamber, as indicated by the polar-

ity symbols (+ and –) marked inside

the chambers.

Insert Charging

Time Graph

23-410.fm Page 6 Friday, August 6, 1999 2:54 PM

Caution: All batteries loaded into

the charger’s chambers must be of

the same size and type.

2. Close the cover. disappears.

First, the charger checks the batter-

ies’ condition. Then, if the batteries

are more than 60% discharged, the

charger’s Intelligent Discharge Sys-

tem (IDS) automatically and com-

pletely discharges them. The

numeric symbol shows the batteries’

voltage, the bars in the amount-of-

charge symbol scan down, and the

black triangle in the IDS icon flashes

to indicate that the charger is dis-

charging the batteries.

Note: To stop the

discharging cycle,

you can press DIS-

CHARGE. The

charger begins soft-

start charging. How-

ever, repeatedly

doing this can

reduce the batteries’

maximum capacity.

If the batteries are less than 60%

discharged, the charger starts soft-

start charging, gradually increasing

the charging current to the batteries.

The bars in the amount-of-charge

symbol scan inward and the black

bar in the soft-start symbol icon

flashes.

Next, the charger begins fast charg-

ing. flashes, and the charger

charges the batteries up to 80–90%

of full capacity. The bars inside the

amount-of-charge symbol scan

upward.

The charger then enters the top-off

charging mode to top off the remain-

ing 10–20% of battery capacity.

and and the top bar inside the

amount-of-charge symbol flash.

Finally, the charger enters the trickle

charging mode, providing a very low

current to keep the batteries at their

fullest until you open the cover.

and continue to flash and

appears. All bars in the amount-of-

charge symbol appear.

3. Open the cover and remove the bat-

teries.

4. Unplug the adapter from the AC out-

let.

Warning: To prevent damage to

your charger and risk of electric

shock, always unplug the AC

adapter from the AC outlet before

you plug it into or unplug it from the

charger.

Cautions:

• After you unplug the adapter from

the AC outlet, wait at least 3 sec-

onds before you plug it into the

AC outlet again.

• Be sure to remove all batteries

before you unplug the adapter to

prevent battery leakage that will

damage the charger.

23-410.fm Page 7 Friday, August 6, 1999 2:54 PM

Note: The charger can activate or revi-

talize some chemically dormant batter-

ies. If you have new batteries (or

batteries that have not been used for a

long time) that cannot be fully charged

(charged to more than 60% of battery

capacity) singly, recharge them three or

four at a time, then discharge them com-

pletely through normal use. Repeat this

process five times. Then, if the batteries

will still not fully charge singly, this

means you will always have to charge

them three or four at a time.

CHARGING A 9V

BATTERY

Refer to the graph on Page 6 for charg-

ing times.

1. After connecting power to the

charger, simply push the terminals

of the 9V battery onto the connec-

tors inside the charger, matching the

polarity symbols marked next to the

connectors. The charger begins

charging the battery and the 9V

charging indicator flashes.

Notes:

• The cover does not need to be

closed to charge the 9V battery.

• You can charge up to 4 AA or

AAA batteries, or 2 C or D batter-

ies at the same time as you

charge a 9V battery.

2. When charging is complete, the 9V

charging indicator lights steadily.

Remove the battery.

Note: If other batteries are still

charging after the 9V battery is fully

charged, the 9V charging indicator

continues to flash until the other bat-

teries are fully charged.

3. Unplug the adapter from the AC out-

let.

Warning: To prevent damage to

your charger and risk of electric

shock, always unplug the AC

adapter from the AC outlet before

you unplug it from the charger.

Cautions:

• After you unplug the adapter from

the AC outlet, wait at least 3 sec-

onds before you plug it into the

AC outlet again.

• Be sure to remove all batteries

before you unplug the adapter to

prevent battery leakage that will

damage the charger.

23-410.fm Page 8 Friday, August 6, 1999 2:54 PM

CARE AND MAINTENANCE

Your RadioShack Ni-Cd and Nickel Metal Hydride Rechargeable Battery Pulse

Charger is an example of superior design and craftsmanship. The following sugges-

tions will help you care for your charger so you can enjoy it for years.

Keep the charger dry. If it gets wet, wipe it dry immediately. Liquids can

contain minerals that corrode electronic circuits.

Use and store the charger only in normal temperature environments.

Temperature extremes can shorten the life of electronic devices, dam-

age batteries, and distort or melt plastic parts.

Handle the charger gently and carefully. Dropping it can damage circuit

boards and cases and can cause the charger to work improperly.

Keep the charger away from dust and dirt, which can cause premature

wear of parts.

Wipe the charger with a damp cloth occasionally to keep it looking new.

Do not use harsh chemicals, cleaning solvents, or strong detergents to

clean your charger.

Modifying or tampering with the charger’s internal components can cause a malfunc-

tion and invalidate your charger’s warranty. If your charger is not performing as it

should, take it to your local RadioShack store for assistance.

23-410.fm Page 9 Friday, August 6, 1999 2:54 PM

SPECIFICATIONS

Number of Channels for 1.2V Ni-Cd/Ni-MH Batteries ............................................... 4

Number of Channels for a 9V Ni-Cd/Ni-MH Battery .................................................. 1

Input Power Rating ............................................................. DC 12 V, 500 mA, 6.0 VA

Output Power Rating ...................................................... DC 2.0 V, 2.0 A max. 4.0 VA

DC 10.5 V, 25.0mA max. 0.3 VA

1.2V Ni-Cd/Ni-MH Battery Charging Current ............................................. 2.0 A max.

9V Ni-Cd/Ni-MH Battery Charging Current .......................................... 17.5–22.5 mA

Discharging/Negative Pulse Loading ............................................................. 0.5 ohm

Discharging Current Rating ......................................................................... 2.5A max.

Battery Sizes ................................................................................ AAA, AA, C, D, 9 V

1.2V Ni-Cd/Ni-MH Battery Rated Capacity ........................................... 180 mAh min.

9V Ni-Cd/Ni-MH Battery Rated Capacity ....................... 65 mAh min./120 mAh max.

Operating Temperature ................................................ 32×F to 104×F (0×C to 40×C)

Recommended Charging Temperature

for Optimum Charging Performance ............................ 68×F to 86×F (20×C to 30×C)

Storage Temperature ............................................... –4×F to 158×F (–20×C to 70×C)

Specifications are typical; individual units might vary. Specifications are subject to

change and improvement without notice.

23-410.fm Page 10 Friday, August 6, 1999 2:54 PM

Inhaltsverzeichnis

Andere Radio Shack Akkuladegerät Handbücher

Radio Shack

Radio Shack Racing Battery Pack DC Charger Bedienungsanleitung

Radio Shack

Radio Shack Twin Charger for Startac Cellular Phones Bedienungsanleitung

Radio Shack

Radio Shack 23-416 Bedienungsanleitung

Radio Shack

Radio Shack Ni-Cd/Ni-MH Universal Battery Charger Bedienungsanleitung

Radio Shack

Radio Shack 20 Hour 9.6 V Ni-Cd/NI-MH Battery Pack... Bedienungsanleitung

Radio Shack

Radio Shack 23-402 Bedienungsanleitung

Radio Shack

Radio Shack 23-038 Bedienungsanleitung

Radio Shack

Radio Shack 0904-211-18801 Bedienungsanleitung

Radio Shack

Radio Shack 23-418 Bedienungsanleitung

Radio Shack

Radio Shack 23-437 Bedienungsanleitung

Radio Shack

Radio Shack 23-436 Bedienungsanleitung

Radio Shack

Radio Shack 21-1930 Bedienungsanleitung

Radio Shack

Radio Shack 23-436 Bedienungsanleitung

Radio Shack

Radio Shack 08A01 Bedienungsanleitung

Radio Shack

Radio Shack Silicon Solar Cell 276-0124 Bedienungsanleitung

Radio Shack

Radio Shack Twin RC Bedienungsanleitung

Radio Shack

Radio Shack 5-Hour AA & AAA Ni-Cd/Ni-MH Battery Charger Bedienungsanleitung

Radio Shack

Radio Shack 1-Hour AA & AAA Ni-Cd/Ni-MH Battery Charger Bedienungsanleitung

Radio Shack

Radio Shack 23-228 Bedienungsanleitung

Radio Shack

Radio Shack Racing Battery Pack AC/DC Charger Bedienungsanleitung

Radio Shack

Radio Shack 23-428 Bedienungsanleitung

Radio Shack

Radio Shack 23-226 Bedienungsanleitung

Radio Shack

Radio Shack 23-248 Bedienungsanleitung

Radio Shack

Radio Shack 23-334 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung