Radio Shack Wireless Security Keychain Remote Bedienungsanleitung

Please read this user’s guide before

installing, setting up and using your new product

www.radioshack.com

Thank you for purchasing your Wireless

Security Keychain Remote from

RadioShack. keychain remote

Two CR2016 lithium batteries (installed)

what’s included

1. Press and hold down arm for 3-4 seconds,

and then release it.

Note: If you need to register the keychain

remote a second time, remove the batteries,

and then hold down arm for 3-4 seconds to

pick up a random code.

2. Press menu start or on your security

system console. ENTER PIN (Personal

Identiﬁcation Number) appears on the

display.

3. Use the console keypad to enter your four-

digit PIN. * appears on the display as each

digit is pressed. After you enter your PIN, 1.

INSTALL appears.

4. Press ok and 1. INSTALL / ZONE appears.

5. Press any button on your keychain remote.

RMOT 1 SET appears on the console display

to conﬁrm registration.

6. Press clear to return to the setup screen.

Press clear again to conﬁrm your exit from

setup mode. Press 1 to return to the main

display, or press 2 to stay in setup mode.

See your Wireless Security Kit User Guide (49-

1000) for instructions on changing your PIN.

49-1002

Wireless Security

Keychain Remote

registering your keychain remote

Use your wireless keychain remote to arm and disarm your Wireless Security Kit

(49-1000). Your Wireless Security Kit includes one keychain remote, and you can purchase

up to 15 additional keychain remotes (16 total) to use with your system. Your keychain can

also control devices connected to remote modules (such as a lamp) that are controlled by

your Wireless Security System. Your keychain includes random digital security coding for

enhanced security.

Press to arm your security system (door/window sensors,

motion detectors).

Press to disarm your security system.

on and off (A and B) allow you to turn on and off up to two

devices that are connected to home automation modules,

such as a 61-3002 Lamp Module. Use this feature to turn lights

on and off while you are away from home.









arming the system

Press arm on your keychain remote.

All door/window sensors and motion

detectors that are part of your security

system are armed instantly.

disarming the system

When you return home, you have 30

seconds to enter and disarm the system

from the console (using your PIN) before

the alarm sounds. Thirty seconds is the

default entry time. Refer to your Wireless

Security Kit User Guide for details on how

to change the default delay and entry

times. Press disarm on the keychain remote

to instantly disarm the system.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Consult your local RadioShack store or an

experienced radio/TV technician for help.

• If you cannot eliminate the interference, the

FCC requires that you stop using your keychain

remote.

Changes or modiﬁcations not expressly approved

by RadioShack may cause interference and void

the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the condition that this

device does not cause harmful interference.

RadioShack.com are trademarks

used by RadioShack Corporation.

49-1002

07A04

Printed in China

arming/disarming your system

FCC information

Your keychain remote comes with two

CR2016 button-cell batteries installed. If

your keychain stops working properly,

replace the batteries.

1. Gently pry the

two halves of the

keychain remote

apart as shown.

2. Remove the old

batteries and

replace them with

two fresh CR2016 button-cell batteries.

Fresh batteries must be inserted within

30 seconds in order to retain the

security code.

3. Press the two halves of the remote

back together.

4. Press arm to arm your system. If the

system does not arm, you must

“registering your keychain remote” on

page 1.

replacing the batteries

• Dispose of old batteries promptly and properly.

• Do not burn or bury batteries.

• Use only fresh batteries of the required size and

recommended type.

• Do not mix old and new batteries, different types

of batteries, or rechargeable batteries of different

capacities.

Warning: Keep away from small children. If

swallowed, promptly see doctor.

Inhaltsverzeichnis

Andere Radio Shack Fernbedienung Handbücher

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack 15-2147 - Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 8-IN-ONE REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 15-1931 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack 6-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 7-in-One IR Bedienungsanleitung

Radio Shack

Radio Shack 15-310 Bedienungsanleitung

Radio Shack

Radio Shack 15-309 Bedienungsanleitung

Radio Shack

Radio Shack Keychain Bedienungsanleitung

Radio Shack

Radio Shack Univer 15-2138 Bedienungsanleitung

Radio Shack

Radio Shack 150-2114 Bedienungsanleitung

Radio Shack

Radio Shack 15-1995 Bedienungsanleitung

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Bedienungsanleitung

Radio Shack

Radio Shack 7-in-One Home Theater Bedienungsanleitung

Radio Shack

Radio Shack 63-1166 Bedienungsanleitung

Radio Shack

Radio Shack 15-1990 Bedienungsanleitung

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack Light and Learn Remote Bedienungsanleitung

Radio Shack

Radio Shack 15-1915B Bedienungsanleitung

Radio Shack

Radio Shack Keychain-Remote Control System Bedienungsanleitung

Radio Shack

Radio Shack 15-303 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung