Radio Shack 15-303 Bedienungsanleitung

15-303

User’s Guide

Satellite/Cable Universal Remote Control

Thank you for purchasing your Satellite/Cable

Universal Remote Control from RadioShack. Please

read this user’s guide before installing, setting up,

and using your new remote control.

Contents

Package contents ............................................................................................................ 3

Features............................................................................................................................ 3

Install Batteries................................................................................................................. 3

Setup ................................................................................................................................ 5

Brand Code Setup ..........................................................................................................................6

Auto Code Search...........................................................................................................................7

Manual Code Search.......................................................................................................................8

Operation......................................................................................................................... 9

Check Current Brand Code.............................................................................................................9

Lock Device...................................................................................................................................10

Lock Volume and Mute .................................................................................................................11

Copying Device Codes .................................................................................................................11

Reset Your Universal Remote........................................................................................................12

Additional Information ................................................................................................... 13

Troubleshooting ............................................................................................................................13

Speciﬁcations ................................................................................................................................15

FCC Information............................................................................................................................15

Limited Warranty...........................................................................................................................16

Setup

Package contents

• RemoteControl • User’sGuide • Code List

Features

• Operatesuptofourdevices

• Controls TV volume regardless of mode

1Install the batteries

Remove the battery cover and insert two AAA batteries (not included), matching the

polarity symbols (+ /–) marked inside. Replace the battery cover.

bBattery Notes:

• Disposeofoldbatteriespromptlyandproperly.Donotburnorburythem.

• Useonlyfreshbatteriesoftherequiredsizeandrecommendedtype.

• Donotmixoldandnewbatteries,differenttypesofbatteries(alkaline

orrechargeable),orrechargeablebatteriesofdifferentcapacities.

• Ifyoudonotplantouseyourremoteformorethanaweek,removethe

batteries.Batteriescanleakchemicalsthatcandamageelectronicparts.

AAA

Setup

CH+/– Select the next or previous

channel. Select the next or previous

chapter on some DVD players.

Device Keys Select a device to

control: TV; VCR/DVD; satellite/cable

(SAT/CBL); or AUX.

GTurn on /off a selected device.

VOL+/– Adjust volume.

0–9 Channel numbers.

Control your VCR or DVD player.

These functions are the same as

those on the device’s original remote.

OK Conﬁrm a setting in the Menu.

Move the cursor

through the program guide and

menu screens.

Conﬁrm a selection.

MUTE Press to mute the sound.

CC Closed captioning.

INFO View the current channel

and program information.

MENU Display the menu for the

selected device.

GUIDE Display the program guide

for the selected device.

SLEEP Set the sleep timer for your

selecteddevice.Onlyworkson

devices with sleep function.

PIP Switch the Picture-in-Picture

feature on/off (if available on your TV).

SWAP Swaps the Picture-in-Picture

window and the main picture.

FREEZE Freezes your Picture-in-

Picture window.

LAST Recall the last viewed channel.

EXIT Exit the selected device’s

menu, guide or program.

INPUT Select the video inputs.

ASPECT Select aspect ratio.

SET Activate setup mode.

–Access subchannels on a TV

or receiver.

Setup

2Setup

Your universal remote can operate a TV, cable or satellite, VCR, DVD player, and

external audio (AUX) device.

Set up your universal remote in one of three ways:

• Brand Code Setup: Directly enter the device code from the Code List. Try each

code until you ﬁnd one that works for your device.

• Auto Code Search: Your universal remote automatically goes through all the

device codes. (This method can take up to 60 minutes to search all the codes for

the 4 devices.)

• Manual Code Search: Manually goes through each code for your device one by

one at the touch of the G button.

n Note:

Keepyourremotepointedatthedevicethatyouwanttoprogramthroughoutsetup.

Brand Code Setup

1. Power on the device that you want to control.

2. Find the code (or codes) for your device in the included Code List. If your device’s

brand is not listed, use the Auto Code Search or Manual Code Search method.

Setup

3. Onyouruniversalremote,pressandholdSET, and then press a device key (TV,

VCR/DVD,SAT/CBL,AUX). The device key lights up and stays lit, indicating that

the remote is in setup mode. Release both buttons.

n Note:Donotholddownthekeysforlongerthan3secondsortheremoteenters

autosearchmode.

4. Enter the ﬁrst 3-digit code for your device and brand. Pause brieﬂy between each

digit to make sure the remote receives all inputs. The device key ﬂashes when input

is received, then turns off if you entered the right code. If the device key stays lit,

enter the next code for your device and brand. Repeat for all possible codes until

the device light turns off.

5. Verify the setup by testing the remote control’s buttons and functions. If some of

your device’s functions do not respond to the remote, repeat step 4 with another

code.

n Notes:

• Touseadifferenttypeofdevicethanwhatislabeledonthedevicekey,followthe

“Copying Device Codes”stepsonpage11.

• Ifyouwanttoquitduringdevicesetup,pressthedevicekeyorwait10secondsfor

theremotetoexitsetupautomatically.

• Ifyouareuncertainaboutyour3-digitcodeentry,follow“Check Current Brand Code”

onpage9toconrmyourcode.

Setup

Auto Code Search

Auto Code Search automatically sends device codes to the device that you want to

control.

1. Power on the device that you want to control. For VCRs and DVD players, you must

insert a tape or disc.

2. Onyouruniversalremote,press and hold SET, then press and hold a device key

(TV, VCR/DVD,SAT/CBL,AUX). Continue to hold down both keys for more than 3

seconds. The device key ﬂashes and the universal remote starts searching. Release

both buttons.

3. When the device responds in any way (switches off, play, pause, volume change,

channel changes ), press any key other than SET within 2 seconds to conﬁrm the

code. The device key will stop ﬂashing.

4. Verify the setup by testing various keys and functions. Press Gon your universal

remote to turn on the device if it turned off in step 3. If some of your device’s

functions do not respond to the remote, repeat steps 2-4.

nNotes:

• BecauseAutoCodeSearchrequiresyoutostopthesearch,youmustremainwiththe

deviceduringtheprocess.

• Tostopsearching,pressanykey(exceptSET).Thedevicekeylightturnsoffandsearch

stops.

Setup

Manual Code Search

Manual Code Search sends codes to the device you want to control one by one at the

touch of the Gbutton.

1. Power on the device that you want to control. For VCRs and DVD players, you must

insert a tape or disc.

2. Ontheuniversalremote,pressandholdSET, then press a device key (TV, VCR/

DVD,SAT/CBL,AUX). The device key lights up and stays lit, indicating the remote

is in setting mode. Release both buttons.

n Note:Donotholddownthekeysforlongerthan3secondsortheremoteenters

autosearchmode.

3. Press Gon the universal remote. The universal remote enters manual code search

mode and the device key ﬂashes.

4. Press Grepeatedly on your universal remote until the device turns off. (Each press

of the Gkey sends a different code to your device.)

When the device turns off, the code is correct. Press the ﬂashing device key on your

universal remote within 10 seconds to conﬁrm the code.

5. Press G on your universal remote to turn your device back on.

6. Verify the setup by testing various keys and functions. If some of your device’s

functions do not respond to the remote, repeat steps 2-6.

Operation

nNotes:

• Duringasearch,youcanpressSETtochangesearchdirectionfromforwardto

backwardorviceversa.

• Ifnokeysarepressedin10seconds,searchstops.

Operation

Check Current Brand Code

For future reference and to save time if you ever need to set up your remote again,

retrieve and write down your device codes for each device key on your universal

remote.

Complete the following steps to check the code number for a speciﬁc device. The

device key on your remote will ﬂash to indicate the codes.

1. Press the device key on your universal remote.

2. To check the ﬁrst digit, press and hold SET, and then press 1. The device key will

ashrepeatedlytoindicatetherstdigit.(Oncefor1,twicefor2,etc.Ifthedevice

key does not ﬂash, this indicates that the ﬁrst digit is “0.”)

Operation

3. To check the second digit, press and hold SET, and then press 2. The device key

will ﬂash repeatedly to indicate the second digit.

4. To check the third digit, press and hold SET, and then press 3. The device key will

ﬂash repeatedly to indicate the third digit.

Lock Device

Lock the device code in your remote so it doesn’t get changed or deleted

unintentionally.

To lock in the code for your current device:

1. Press the device key that you want to lock on your universal remote.

2. Hold down SET, and then press 7. The device key blinks twice. The code for the

current device is now locked and cannot be overwritten.

3. To unlock the current device key, press and hold SET, and then press 8. The device

key blinks twice.

nNote:

• Thelockeddevicescannotbechangeduntilyouunlockthecurrentdevicekeyorreset

yourremote.

• Tounlockacodeotherthanthecurrentone,pressthatdevicekeybeforefollowingstep3.

Inhaltsverzeichnis

Andere Radio Shack Fernbedienung Handbücher

Radio Shack

Radio Shack 15-2147 - Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Bedienungsanleitung

Radio Shack

Radio Shack 15-310 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack Keychain Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-1915B Bedienungsanleitung

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack Keychain-Remote Control System Bedienungsanleitung

Radio Shack

Radio Shack Wireless Security Keychain Remote Bedienungsanleitung

Radio Shack

Radio Shack 4 Bedienungsanleitung

Radio Shack

Radio Shack 7-in-One IR Bedienungsanleitung

Radio Shack

Radio Shack 63-1166 Bedienungsanleitung

Radio Shack

Radio Shack 2-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 6-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack Audio/ Video Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-309 Bedienungsanleitung

Radio Shack

Radio Shack 15-1931 Bedienungsanleitung

Radio Shack

Radio Shack Light and Learn Remote Bedienungsanleitung

Radio Shack

Radio Shack 15-1925 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung