Radio Shack Add-On 2.4 GHzWireless Color Camera Bedienungsanleitung

Owner’s Manual

Please read before using this equipment.

Add-On 2.4 GHz

Wireless Color Camera

49-2536.fm Page 1 Tuesday, October 10, 2000 11:38 AM

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to

rain or moisture.

CAUTION

RISK OF ELECTRIC

SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER OR BACK. NO

USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

PERSONNEL.

Plug ’n Power is a registered trademark used by

RadioShack Corporation.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

49-2536.fm Page 2 Tuesday, October 10, 2000 11:38 AM

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that

might be of sufficient magni-

tude to constitute a risk of elec-

tric shock. Do not open the

product’s case.

This symbol is intended to

inform you that important oper-

ating and maintenance instruc-

tions are included in the

literature accompanying this

product.

The graphical symbols with supplemental

markings are located on the back of the AC

adapter.

49-2536.fm Page 3 Tuesday, October 10, 2000 11:38 AM

4Features

Features

Your RadioShack Add-On 2.4 GHz Wire-

less Color Camera is a small, compact

CMOS color camera with a built-in 2.4

GHz video sender. It is designed for use

with the RadioShack 2.4 GHz Wireless

Color System (Cat. No. 49-2535). You

can also use your camera with the Ra-

dioShack Room to Room Audio/Video

Sender (Cat. No. 15-1972).

Note: See the Owner’s Manuals for the

Wireless Color System and Room to

Room Audio/Video Sender for more infor-

mation about using your camera with

those products.

Its features include:

Built-In Microphone — lets you hear

sound from the area around the camera.

49-2536.fm Page 4 Tuesday, October 10, 2000 11:38 AM

Features

Color CMOS Sensor — provides superi-

or image resolution.

4-Channel Slide Switch — lets you se-

lect the same channel as the camera’s

receiver.

Adjustable Hinged Bracket — lets you

adjust the camera to the desired cover-

age area.

FCC STATEMENT

This equipment generates and uses radio

frequency energy, and if not installed and

used properly, that is, in strict accordance

with the manufacturer's instructions, may

cause interference to radio and television

reception. It has been type tested and

found to comply with the limits for remote

control security devices in accordance

with the specifications in sub-parts B and

49-2536.fm Page 5 Tuesday, October 10, 2000 11:38 AM

6Features

C of Part 15 of

FCC Rules

. These limits

provide reasonable protection against ra-

dio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures:

• reorient or relocate the receiving

antenna

• increase the distance between the

equipment and the radio or TV

• use outlets on different electrical cir-

cuits for the equipment and the radio

or TV

Consult your local RadioShack store if

the problem still exists.

49-2536.fm Page 6 Tuesday, October 10, 2000 11:38 AM

Features

Changes or modifications not expressly

approved by RadioShack may cause in-

terference and void the user’s authority to

operate the equipment.

You must use shielded interface cables

with this equipment.

This device complies with Part 15 of the

FCC Rules

. Operation is subject to the

following two conditions: (1) this device

may not cause harmful interference, and

(2) this device must accept any interfer-

ence received, including interference that

may cause undesired operation.

CAMERA MOUNTING

GUIDELINES

Before you install the camera, carefully

plan where and how you will position it

and where you will route the cable that

49-2536.fm Page 7 Tuesday, October 10, 2000 11:38 AM

8Features

connects the camera to the power

source. Consider the following when

planning the installation.

• Select a location for the camera that

provides a clear view of the area you

want to monitor, is free from dust,

and is not in the line-of-sight of a

strong light source or in direct sun-

light.

• Plan the cable’s route so it is not

close to power or telephone lines,

transformers, or other electrical

equipment that could interfere with,

or accept interference from, the sys-

tem.

• Select a location for the camera that

has an ambient temperature

between –4°F (–20°C) and 122°F

(50°C).

49-2536.fm Page 8 Tuesday, October 10, 2000 11:38 AM

Features

• If you plan to install the camera in a

location that has conditions not rec-

ommended in this manual, consult

with a professional installer and con-

sider use of a separate camera

cover or housing.

• Before starting a permanent installa-

tion, have another person hold the

camera while you verify its perfor-

mance by observing on the monitor.

This helps determine the best final

position for your camera.

LIGHTING AND YOUR

CAMERA’S LOCATION

Though the camera is highly sensitive, it

cannot “see” in total darkness over a

wide area. To assist the camera’s night

vision, install a 100-watt incandescent

lamp (which is rich in infrared radiation)

49-2536.fm Page 9 Tuesday, October 10, 2000 11:38 AM

10 Preparation

to illuminate the camera’s viewing area.

You can also use a small incandescent

flood lamp. Halogen lamps, other high

pressure outdoor lamps, and fluorescent

lighting are poor in infrared and are there-

fore not recommended.

Preparation

MOUNTING THE CAMERA

You can mount the camera in a perma-

nent location such as a wall or on a mov-

able platform (such as a tripod) for

mounting on a desk, shelf, or table.

Mounting on a Wall

1. Using the base of the camera as a

guide, mark the locations for the two

supplied mounting screws on the

mounting surface.

49-2536.fm Page 10 Tuesday, October 10, 2000 11:38 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Sicherheitskamera Handbücher

Radio Shack

Radio Shack 49-1356 Bedienungsanleitung

Radio Shack

Radio Shack B/W 1/3-INCH BASIC CCD CAMERA Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Wireless Add-On Camera Bedienungsanleitung

Radio Shack

Radio Shack 32.4 GHz Wireless Video System Bedienungsanleitung

Radio Shack

Radio Shack 49-2516 Bedienungsanleitung

Radio Shack

Radio Shack 49-2513 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung