Radio Shack ET-2105 Bedienungsanleitung

CONTENTS

Features .............................................................................. 1

Selecting a Location .................................................... 6

Connecting the Base ........................................................... 7

Connecting, Charging, and Replacing

the Battery Pack .......................................................... 8

Setting the Ringer ...................................................... 10

Setting the Dialing Mode ............................................ 10

Using the Earphone ................................................... 11

Using the Belt Clip ..................................................... 11

Operation ......................................................................... 12

Making and Receiving Calls ....................................... 12

Adjusting the Keypad’s Volume ................................. 13

Changing Channels ................................................... 13

Using Redial .............................................................. 13

Using Mute ................................................................. 14

Using Flash ................................................................ 14

Using Tone Services on a Pulse Line ........................ 14

Using Page ................................................................ 15

Memory Dialing ................................................................. 15

Storing a Number in Memory ..................................... 15

Entering a Pause in a Memory Number ..................... 16

Dialing a Stored Number ............................................ 17

Chain Dialing Service Numbers ................................. 17

Testing Stored Emergency Numbers ......................... 17

Troubleshooting ................................................................ 18

Care .................................................................................. 19

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

OWNER’S MANUAL — Please read before using this equipment.

ET-2105

900 MHz Hands-free Phone

FEATURES

Your RadioShack 900 MHz Hands-free Phone combines the clar-

ity of 900 MHz communication with portability and convenience.

The phone’s cordless keypad clips to your belt or clothing so you

can make and answer calls away from the base. The earphone

with microphone lets you keep your hands free while you talk.

Your phone has these features:

Ample Talk and Standby Time — when fully charged (about 12

hours), the supplied battery provides about 7 hours of talk time or

7 days of standby time.

Ten-Memory Speed Dial — stores up to ten frequently called

phone numbers for easy dialing.

Ten-Channel Auto Scan — automatically selects a clear channel

when you make or answer a call.

Security Access-Protection Code — prevents other cordless

phone users from using your phone line. Each time you place the

keypad on the base, the keypad automatically sets a new security

access-protection code.

Volume Control — lets you control the volume of the sound you

hear through the earphone.

Page — lets you send a paging signal from the base to the key-

pad to help locate a misplaced keypad or page someone at the

keypad.

Detachable Belt Clip — lets you carry the keypad on your belt or

clothing for easy portability.

Earphone Compartment with Cover — lets you store the ear-

phone when not in use.

Neck Strap Hole — lets you thread a neck strap (not supplied)

through the keypad and hang the keypad around your neck.

Your phone is ETL listed to UL standards and meets all applicable

FCC standards.

WARNING: To reduce the risk of fire or shock hazard, do not ex-

pose this product to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSON-

NEL.

This symbol is intended to alert you to the pres-

ence of uninsulated dangerous voltage within the

product’s enclosure that might be of sufficient

magnitude to constitute a risk of electric shock.

Do not open the product’s case.

READ THIS BEFORE INSTALLATION

We have designed your phone to conform to federal regulations,

and you can connect it to most telephone lines. However, each

phone (and each device, such as a telephone or answering ma-

chine) that you connect to the telephone line draws power from

the telephone line. We refer to this power draw as the device's

ringer equivalence number, or REN. The REN is on the bottom of

your phone’s base.

If you use more than one phone or other device on the line, add

up all of the RENs. If the total is more than five (or three in rural ar-

eas), your telephones might not ring. If ringer operation is im-

paired, remove a device from the line.

Your phone complies with Part 68 of

FCC Rules

. You must, upon

request, provide the FCC registration number and the REN to

your telephone company. Both numbers are on the bottom of your

phone’s base.

Note: You must not connect your phone to:

• coin-operated systems

• party-line systems

• most electronic key telephone systems

This symbol is intended to inform you that impor-

tant operating and maintenance instructions are

included in the literature accompanying this prod-

uct.

Important:

• Cordless phones such as this one require AC power to oper-

ate. When the AC power is off, you cannot dial out or receive

incoming calls using your phone. For this reason, the phone

should not be your only telephone. To be safe, you should

also have a phone that does not require AC power to operate

(not a cordless phone) so you can still make and receive calls

if there is an AC power failure.

• Some cordless phones operate at frequencies that might

cause interference to nearby TVs and VCRs. To minimize or

prevent such interference, the base of the cordless phone

should not be placed near or on top of a TV or VCR.

• Your cordless phone operates on standard radio frequencies,

as allocated by the FCC. Even though your phone's access

protection code prevents unauthorized use of your phone

line, it is possible for other radio units operating on similar fre-

quencies within a certain area to unintentionally intercept

your conversations and/or cause interference. This possible

lack of privacy can occur with any cordless phone.

THE FCC WANTS YOU TO KNOW

In the unlikely event that your phone causes problems on the

phone line, the phone company can temporarily discontinue your

service. If this happens, the phone company attempts to notify you

in advance. If advance notice is not practical, the phone company

notifies you as soon as possible and advises you of your right to

file a complaint with the FCC.

Also, the phone company can make changes to its lines, equip-

ment, operations, or procedures that could affect the operation of

this telephone. The telephone company notifies you of these

changes in advance, so you can take the necessary steps to pre-

vent interruption of your telephone service.

LIGHTNING

Your telephone has built-in protection circuits to reduce the risk of

damage from surges in telephone line and power line current.

These protection circuits meet or exceed the FCC requirements.

However, lightning striking the telephone or power lines can dam-

age your telephone.

Lightning damage is not common. Nevertheless, if you live in an

area that has severe electrical storms, we suggest that you unplug

your phone when storms approach to reduce the possibility of

damage.

FCC STATEMENT

The phone complies with the limits for a Class B digital device as

specified in Part 15 of

FCC Rules

. These limits provide reason-

able protection against radio and TV interference in a residential

area. However, your equipment might cause TV or radio interfer-

ence even when it is operating properly. To eliminate interference,

you can try one or more of the following corrective measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the radio

or TV.

• Use outlets on different electrical circuits for the equipment

and the radio or TV.

Consult your local RadioShack store if the problem still exists.

PREPARATION

Selecting a Location

You can place the phone’s base on a flat surface such as a desk,

shelf, or table.

Select a location that is:

• near an easily accessible AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery, electrical appliances, metal

walls, filing cabinets, wireless intercoms, security alarms, and

room monitors

The base’s location affects the phone’s range. If you have a

choice of several locations, try each to see which provides the

best performance.

Caution: The supplied AC adapter was designed specifically for

your phone. Use only the supplied adapter.

Your telephone connects directly to a modular telephone line jack.

If your telephone wiring does not have a modular jack, you can

update the wiring yourself using jacks and adapters (available at

your local RadioShack store), or have the telephone company up-

date the wiring for you. You must use compatible modular jacks

that are compliant with Part 68 of

FCC Rules

Note: The USOC number of the jack to be installed is RJ11C.

CONNECTING THE BASE

You can power the base using the supplied 12V, 200 mA AC/DC

adapter.

Cautions:

You must use a Class 2 power source that supplies

12V DC and delivers at least 200 mA. Its center tip

must be set to positive and its plug must fit the

phone's DC 12V 200mA jack. The supplied adapter meets

these specifications. Using an adapter that does not meet

these specifications could damage the phone or the adapter.

• Always connect the AC adapter to the phone before you con-

nect it to AC power. When you finish, disconnect the adapter

from AC power before you disconnect it from the phone.

Follow these steps to connect the base to a phone line and AC

power:

1. Plug one end of the supplied modular cord into the TEL LINE

jack on the back of the base.

2. Plug the modular cord’s other end into a modular phone line

jack.

3. Insert the supplied AC adapter’s barrel plug into the DC 12V

200mA jack on the back of the base.

4. Plug the adapter into a standard AC outlet.

5. Lift the base’s antenna to a vertical position.

Connecting, Charging, and

Replacing the Battery Pack

The phone comes with a rechargeable NiMH battery pack. You

must connect the battery pack and charge it for at least 12 hours

before you use the phone for the first time.

1. Press down and slide off the battery pack compartment cover.

2. Lift the battery pack out of the compartment.

3. Plug the battery pack’s connector into the socket in the com-

partment (the connector fits only one way), then replace the

battery pack.

4. Replace the cover.

To charge the battery pack, place the keypad faceup on the base.

The CHARGE/IN USE indicator lights.

Notes:

• Recharge the battery pack if the keypad beeps and the IN

USE/LOW BATT indicator on the keypad flashes while you

are using the phone, or if the IN USE/LOW BATT indicator

flashes when the phone is not in use.

• When you first use the phone after charging or recharging the

battery pack, the phone might not work. Return the keypad to

the base for about 5 seconds to reset the security access-

protection code.

• If the CHARGE/IN USE indicator does not light when you

place the keypad on the base, be sure the battery pack and

AC adapter are correctly and securely connected. Also,

check the charging contacts on the keypad and base. If the

contacts are dirty or tarnished, clean them with a pencil

eraser.

• If the battery pack becomes completely discharged or the

base loses power while the keypad is away from it, place the

keypad on the base for about 5 seconds to reset the security

access-protection code. If the keypad loses power, leave it on

the base to charge the battery pack.

• If you are not going to use your phone for an extended period

of time, disconnect its battery pack. This helps increase the

battery pack’s life.

• When the keypad is on the base, the CHARGE/IN USE indi-

cator lights even when the battery pack is not connected. If

your phone does not work, be sure the battery pack is prop-

erly connected.

The supplied battery pack should last about a year. If the battery

pack does not hold a charge for more than 2 hours after an over-

night charge, replace it with a new 3.6-volt, 600 mAh battery pack

with a connector that fits the socket in the battery compartment.

You can order a replacement battery pack through your local Ra-

dioShack store.

Note: To avoid losing numbers stored in memory, you must install

and begin charging the new battery pack within 2 minutes of re-

moving the old one.

Warning: Dispose of the old battery pack promptly and properly.

Do not burn or bury it.

Inhaltsverzeichnis

Andere Radio Shack Telefon Handbücher

Radio Shack

Radio Shack 43-3905 Bedienungsanleitung

Radio Shack

Radio Shack 43-838 Bedienungsanleitung

Radio Shack

Radio Shack ET-177 Bedienungsanleitung

Radio Shack

Radio Shack Big Button Phone Bedienungsanleitung

Radio Shack

Radio Shack SYSTEM 612 Bedienungsanleitung

Radio Shack

Radio Shack COUNTRY LIFE 43-860 Bedienungsanleitung

Radio Shack

Radio Shack TAD-705 Bedienungsanleitung

Radio Shack

Radio Shack 43-3601 Bedienungsanleitung

Radio Shack

Radio Shack Desktop Phone Bedienungsanleitung

Radio Shack

Radio Shack 17-918 Bedienungsanleitung

Radio Shack

Radio Shack ET-928 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1004 Bedienungsanleitung

Radio Shack

Radio Shack 4-Line System Speakerphone with Caller ID and Headset... Bedienungsanleitung

Radio Shack

Radio Shack ET-216 Bedienungsanleitung

Radio Shack

Radio Shack 43-3816 Bedienungsanleitung

Radio Shack

Radio Shack ET-195 Bedienungsanleitung

Radio Shack

Radio Shack ET-501 Bedienungsanleitung

Radio Shack

Radio Shack 43-3818 Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack ET-688 Bedienungsanleitung

Radio Shack

Radio Shack 43-3515 Bedienungsanleitung

Radio Shack

Radio Shack Caller Bedienungsanleitung

Radio Shack

Radio Shack 43-3911 Bedienungsanleitung

Radio Shack

Radio Shack 43-337 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung