Radio Shack 43-3601 Bedienungsanleitung

Owner’s Manual

Please read before using this equipment.

ET-3601

20 Number One-Touch Memory

Home/Office Speakerphone

43-3601.fm Page 1 Monday, April 10, 2000 5:53 PM

2Contents

Contents

Features ................................................................................................................... 3

FCC Statement ................................................................................................... 3

Preparation .............................................................................................................. 4

Selecting a Location ........................................................................................... 4

On a Desk Top ............................................................................................. 4

On a Wall Plate or Wall ................................................................................ 4

Connecting the Handset ..................................................................................... 5

Connecting an Optional AC Adapter .................................................................. 5

Setting the Ringer ............................................................................................... 6

Setting the Dialing Mode .................................................................................... 6

Setting the Volume ............................................................................................. 6

Operation ................................................................................................................. 7

Using the Speakerphone .................................................................................... 7

Switching Between the Handset and Speakerphone ................................... 7

Using a Headset ................................................................................................. 8

Using Privacy ...................................................................................................... 8

Using Redial ....................................................................................................... 8

Using Flash ......................................................................................................... 8

Using Interoffice Signals ..................................................................................... 8

Using Pause ....................................................................................................... 9

Using Special Tone Services .............................................................................. 9

Memory Dialing ................................................................................................... 9

Chain-Dialing Service Numbers ................................................................... 9

Troubleshooting .................................................................................................... 10

Care and Maintenance .......................................................................................... 10

The FCC Wants You to Know ........................................................................... 10

Lightning ........................................................................................................... 11

RadioShack and RadioShack.com are trademarks used by Tandy Corporation.

43-3601.fm Page 2 Monday, April 10, 2000 5:53 PM

3Features

Features

Your RadioShack 20 Number One-

Touch Memory Home/Office Speaker-

phone lets you store frequently called

telephone numbers in memory so you

can call any stored number. Its features

include:

Built-in Speakerphone — gives you

hands-free operation.

Headset Jack — lets you use an option-

al headset to make or receive calls.

Privacy — lets you temporarily turn off

the speakerphone and handset micro-

phone.

Adjustable Ringer and Receiver Vol-

ume — lets you adjust the ringer and re-

ceiver’s volume to the desired level.

Hearing-Aid Compatibility — allows

you to use your telephone with a hearing

aid that is equipped with a telephone

switch.

Your telephone is ETL listed and meets

all applicable FCC standards.

FCC STATEMENT

We have designed your telephone to

conform to federal regulations, and you

can connect it to most telephone lines.

However, each device that you connect

to the telephone line draws power from

the line. We refer to this power draw as

the phone’s ringer equivalence number

(REN). The REN is on the bottom of

your phone.

If you use more than one phone or other

device on the line, add up all the RENs.

If the total is more than five (three in ru-

ral areas), your phone might not ring.

The ringer operation is impaired, re-

move one of the devices from the line.

Your telephone complies with Part 68 of

FCC Rules

, you must, upon request,

provide the FCC registration numbers

and the REN to your telephone compa-

ny. Both numbers are shown on the bot-

tom of the telephone.

Note: You must not connect your tele-

phone to:

• coin-operated systems

• party-line systems

• most electronic key telephone sys-

tems

43-3601.fm Page 3 Monday, April 10, 2000 5:53 PM

4Preparation

Preparation

SELECTING A LOCATION

You can place your telephone on a

shelf, desk or table, or mount it on a

wall. Select a location that is:

• Near an accessible telephone jack

• Not in the way of normal activities in

the area

On a Desk Top

Use the supplied mounting bracket as a

stand when you place the base on a

desk, shelf, or table.

1. Insert the two smaller tabs on the

mounting bracket into the matching

slots near the keyhole slot on the

bottom of the phone’s base. Then

press down on the bracket until its

two larger tabs snap into place.

2. Plug one end of the supplied long

modular cord into the LINE jack on

the back of the base.

3. Plug the modular cord’s other end

into a modular phone line jack.

On a Wall Plate or Wall

1. Insert the two smaller tabs on the

mounting bracket into the matching

slots near the center bottom of the

phone’s base. Then press down on

the bracket until its two larger tabs

snap into place.

2. Plug one end of the supplied short

modular cord into the LINE jack on

the back of the base as in “On a

Desk Top,” Step 2.

LINE Jack

43-3601.fm Page 4 Monday, April 10, 2000 5:53 PM

5Preparation

3. Plug the modular cord’s other end

into the wall plate jack, then align

the base’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

4. Press and lift out

the handset hold-

er, rotate it 180°,

then snap it back

into place so it

holds the hand-

set.

Note: To mount the phone directly on a

wall, you need two screws (not supplied)

with heads that fit into the keyhole slots

on the bottom of the base.

Follow the steps under “On a Wall Plate

or Wall,” then apply these additional in-

structions for placement on a wall.

1. Drill two holes 315/16 inches (100

mm) apart. Then thread a screw into

each hole, letting the heads extend

about 5/16 inch (8 mm) from the wall.

2. Plug one end of the supplied long

modular cord into the LINE jack on

the back of the base.

3. Align the base’s keyhole slots with

the mounting screws and slide the

base downward to secure it.

CONNECTING THE

HANDSET

Plug one end of the coiled cord into the

modular jack on the handset. Then con-

nect it to the jack on the left side of the

telephone’s base.

Note: Your local RadioShack store sells

a variety of longer coiled handset cords,

which are especially useful when you

mount the phone on a wall.

CONNECTING AN

OPTIONAL AC ADAPTER

Your telephone operates from telephone

line power. In some areas, however, the

telephone line might not provide enough

power to operate all of your telephone’s

features. If the speakerphone’s volume

is too low, even with the volume control

set to its highest level, or if the speaker-

phone does not work, you need to con-

nect the supplied AC adapter.

315/16

Inches

5/16

Inches

43-3601.fm Page 5 Monday, April 10, 2000 5:53 PM

6Preparation

Cautions:

You must use a Class 2

power source that supplies

9V DC and delivers at least

200 mA. Its center tip must be set to

positive and its plug must fit the tele-

phone's DC 9V jack. The supplied

adapter meets these specifications.

Using an adapter that does not meet

these specifications could damage

the telephone or the adapter.

• Always connect the AC adapter to

the telephone before you connect it

to AC power. When you finish, dis-

connect the adapter from AC power

before you disconnect it from the

telephone.

Plug the barrel plug of the supplied

adapter into the DC 9V jack on the back

of the telephone. Plug the other end into

the AC outlet.

SETTING THE RINGER

If you do not want to hear the phone

ring, set RINGER to OFF. You can still

make calls with the ringer off, and you

can answer calls if you hear another

phone on the same phone line ring.

If you want to hear the phone ring, set

RINGER to the desired volume (HI or

LO).

SETTING THE DIALING

MODE

Set T/P (Tone/Pulse) for the type of ser-

vice you have. If you are not sure which

type you have, do this simple test.

1. Set T/P to T. Lift the handset and lis-

ten for a dial tone.

2. Press any number except 0. If your

phone requires that you dial an

access code (9, for example) before

you dial an outside number, do not

press the access code number

either.

3. If the dial tone stops, you have

touch-tone service. Leave T/P set to

If the dial tone continues, you have

pulse service. Set T/P to P.

SETTING THE VOLUME

Slide RECEIVER VOL to LO (low), MED

(medium), or HI (high) as desired.

Slide SPEAKER VOL to set the volume

as desired.

DC 9V Jack

SPEAKER VOL

RECEIVER VOL

T/P RINGER

43-3601.fm Page 6 Monday, April 10, 2000 5:53 PM

7Operation

Operation

To dial a number manually, lift the hand-

set and enter the telephone number as

usual.

USING THE

SPEAKERPHONE

To use the built-in speakerphone in-

stead of the handset at any time, press

SPEAKERPHONE. The SPEAKER-

PHONE indicator lights.

Press SPEAKERPHONE again to discon-

nect the telephone line.

Switching Between the

Handset and Speakerphone

To switch from the handset to the

speakerphone, press SPEAKERPHONE,

then return the handset to the cradle.

To switch from the speakerphone to the

handset, just lift the handset.

To switch from the speakerphone to the

handset during redialing or memory dial-

ing, let the number completely dial, then

lift the handset.

To switch from the handset to the

speakerphone during redialing or mem-

ory dialing, let the number completely

SPEAKERPHONE

REDIAL PRIVACY

STORE

PAUSE

FLASH

Memory Buttons

(Use the memory

index card to

record numbers.)

43-3601.fm Page 7 Monday, April 10, 2000 5:53 PM

8Operation

dial, then press SPEAKERPHONE and

return the handset to the cradle.

USING A HEADSET

For hands-free convenience, you can

connect an optional headset with a 3/32-

inch (2.5 mm) plug to the telephone.

Contact your local RadioShack store for

a suitable headset.

With the handset off the hook, plug the

headset's cord into the HEADSET jack

on the left side of the telephone.

To switch from the headset to the hand-

set, unplug the headset cord from the

telephone, replace the handset on the

cradle, then pick up the handset to make

or receive a call.

USING PRIVACY

To temporarily disconnect the speaker-

phone or handset without ending the call

(so you can talk privately with someone

in the room), press PRIVACY. The PRI-

VACY indicator lights and the person on

the other end of the phone line cannot

hear you.

To resume your call, press PRIVACY

again. The PRIVACY indicator goes off.

You can also use the privacy feature

with the handset microphone.

USING REDIAL

You can quickly redial the last number

dialed by pressing REDIAL while you

hear a dial tone. The redial number is re-

placed each time you dial a new num-

ber.

Note: If you press FLASH while dialing a

number, only the digits preceding

FLASH are stored in redial memory.

USING FLASH

Many special telephone services, such

as Call Waiting, require a switchhook

signal. FLASH provides the electronic

equivalent of a switchhook operation.

For example, if you have Call Waiting,

you can put a call on hold and take a

second incoming call on the same line

by pressing FLASH.

Neither the flash entry nor any digits you

dial after you press FLASH are stored in

redial memory. However, you can store

a flash entry within a memory dialing se-

quence as the first digit. The flash entry

counts as one digit in memory.

Note: If you do not have any special

phone services, pressing FLASH might

disconnect the current call.

USING INTEROFFICE

SIGNALS

Some interoffice telephone systems pro-

vide special services that require a

switchhook signal. For example, a single

switchhook signal followed by an exten-

sion can transfer a call from one office to

another inside the office telephone net-

work.

HEADSET Jack

43-3601.fm Page 8 Monday, April 10, 2000 5:53 PM

9Operation

You can store a single switchhook signal

in memory at the beginning of an exten-

sion. Then, when a call comes in asking

for the person at that extension, you can

transfer the call with the push of a single

button.

USING PAUSE

In some telephone systems, you must

dial an access code (9, for example) and

wait for a second dial tone before dialing

an outside number. When you manually

dial a number, or when you store a num-

ber in memory, you can have your tele-

phone pause anywhere during the

dialing sequence. Simply press PAUSE

at the desired location.

When you redial or memory dial a num-

ber, the telephone pauses for about 3.6

seconds at the pauses entry. For longer

pauses, press PAUSE more than once.

Each pause entry counts as one digit in

memory.

USING SPECIAL TONE

SERVICES

Some computer services, such as alter-

nate long-distance and bank-by-phone,

require tone signals for communications.

If you have pulse service, you can still

use these special tone services by fol-

lowing these steps.

1. Connect to the special service using

pulse dialing.

2. When the special service answers,

set T/P to T.

3. When you complete the call, hang

up the handset and set T/P back to

MEMORY DIALING

The telephone can store up to 20 phone

numbers in memory. Follow these steps

to store a number in memory.

1. With the handset off hook or the

speakerphone on, press STORE.

2. Enter the telephone number, then

press

STORE.

3. Press the desired memory location

button.

4. Use a pointed object, such as a

straightened paper clip, to pry up

the plastic cover from over the

memory index card. Write the num-

ber you stored next to the memory

location button, then replace the

plastic cover.

To dial a stored number, press the

memory location button for the number.

Chain-Dialing Service Numbers

For quick recall of numbers for special

services (such as bank by phone), store

each group of numbers in its own mem-

ory location.

Dial the service’s main number first.

Then, at the appropriate place in the

call, press the memory location button

for the location where the additional in-

formation is stored.

43-3601.fm Page 9 Monday, April 10, 2000 5:53 PM

10 Troubleshooting

Troubleshooting

If your telephone is not operating prop-

erly, check these items:

• Is the phone properly connected?

•Is

T/P set correctly?

• This phone might not operate when

another phone is in use on the same

line (especially in areas with low

telephone voltage). If the tele-

phone’s volume drops or you hear

unusual sounds, check to see if

another phone on the same line is

off hook. Hang up the other phones

to correct the problem.

• When the party on the phone cannot

hear you, but you can hear them,

check the PRIVACY indicator. If the

light is on, press PRIVACY so it is off.

If you still have problems, disconnect the

phone. If other phones on the same line

work properly, the fault is in this phone

or its installation. If you cannot find the

problem, take your phone to your local

RadioShack store for assistance.

Care and Maintenance

To enjoy your telephone for a long time:

• Keep the telephone dry. If it gets

wet, wipe it dry immediately.

• Use and store the telephone only in

normal temperature environments.

• Handle the telephone gently and

carefully. Don’t drop it.

• Keep the telephone away from dust

and dirt.

• Wipe the telephone with a damp

cloth occasionally to keep it looking

new.

Modifying or tampering with the tele-

phone’s internal components can cause

a malfunction and invalidate its warran-

ty. If your telephone is not performing as

it should, take it to your local Ra-

dioShack store for assistance. If the

trouble is affecting the telephone lines,

the phone company can ask you to dis-

connect your telephone until you have

resolved the problem.

THE FCC WANTS YOU TO

KNOW

In the unlikely event that your telephone

causes problems on the telephone line,

the telephone company can disconnect

your service. The telephone company

attempts to notify you in advance. If ad-

vance notice is not practical, the tele-

phone company notifies you as soon as

possible and advises you of your right to

file a complaint with FCC.

Also, the telephone company can make

changes to its lines, equipment, opera-

tions, or procedures that could affect the

operation of this telephone. The tele-

43-3601.fm Page 10 Monday, April 10, 2000 5:53 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Telefon Handbücher

Radio Shack

Radio Shack 43-838 Bedienungsanleitung

Radio Shack

Radio Shack ET-3507 Bedienungsanleitung

Radio Shack

Radio Shack 43-3909 Bedienungsanleitung

Radio Shack

Radio Shack 43-1301 Bedienungsanleitung

Radio Shack

Radio Shack 43-3901 Bedienungsanleitung

Radio Shack

Radio Shack ET-182 Bedienungsanleitung

Radio Shack

Radio Shack ET-3204 Bedienungsanleitung

Radio Shack

Radio Shack ET-2105 Bedienungsanleitung

Radio Shack

Radio Shack ET-152 Bedienungsanleitung

Radio Shack

Radio Shack 43-3201 Bedienungsanleitung

Radio Shack

Radio Shack ET-898 Bedienungsanleitung

Radio Shack

Radio Shack ET-294 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1004 Bedienungsanleitung

Radio Shack

Radio Shack 43-140 Bedienungsanleitung

Radio Shack

Radio Shack ET-1755 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack 43-3911 Bedienungsanleitung

Radio Shack

Radio Shack Caller Bedienungsanleitung

Radio Shack

Radio Shack ET-148 Bedienungsanleitung

Radio Shack

Radio Shack ET-296 Bedienungsanleitung

Radio Shack

Radio Shack 17-918 Bedienungsanleitung

Radio Shack

Radio Shack 43-3515 Bedienungsanleitung

Radio Shack

Radio Shack ITZA 2 Bedienungsanleitung

Radio Shack

Radio Shack 43-3241 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung