Radio Shack TP-396 Bedienungsanleitung

TEKCOM Industries Limited

Page 1of 9

OWNER’S MANUAL

FRS/GMRS RADIO

TP-396

(2002-09-12)

INTRODUCTION

With RadioShack’s base station FRS/GMRS radio, you can stay in constant communication

with your family throughout your home. In addition, they’re great for office use as well.

Your radio has 22 channels and 38 different QUIET codes. If someone else is using the

channel you selected and you do not want to hear that person, select another channel, or use

the QUIET feature. You can talk with a person who has a FRS/GMRS radio if both radios are

tuned to the same channel and QUIET code.

Your radio has auto-squelch, which means you will not hear anything on a channel unless

someone is transmitting nearby on the same channel. You can turn off auto-squelch to hear

weaker, distant transmissions.

You can connect an optional speaker/microphone and earphone to the radio. The VOX

operation brings you convenient hands-free use.

Your transceiver has these features:

Selective Channel and QUIET ---- You can select the channel from one of the 22

FRS/GMRS channels and one of the 38 QUIET codes. The channel and Quiet code are

selected on the display.

PLL Controlled Circuitry ---- provides accurate and stable channel selection.

QUIET (Continuous Tone Control Squelch System) ---- helps reduce interference from

other systems in the area operating on the same frequency.

Built-in Modulation Limiter Circuit ---- automatically adjusts for a wide variety of voice

levels to ensure an understandable transmission.

External Earphone and Microphone---- Let you transmit or receive message by pressing

or releasing Talk button on the headset or use VOX option for hands-free operation.

Fixed Rod Antenna ---- Let you have a better performance of communication.

We recommend you record your transceiver’s serial number here. This number is on the

transceiver’s back panel.

TEKCOM Industries Limited

Page 2of 9

Serial Number_______________________

Your transceiver might cause TV or radio interference even when it is operating properly. To

determine whether your transceiver is causing the interference, turn off your transceiver. If the

interference goes away, your transceiver is causing it. Try to eliminate the interference by:

•Moving your transceiver away from the receiver.

•Contacting your local RadioShack store for help.

Connecting Power

The FRS/GMRS intercom requires the supplied 6V, 500mA AC adapter and a standard AC

outlet for power.

Caution:

You must use a Class 2 power source that supplies 6V DC and delivers at

least 500 mA. Its center tip must be set to positive and its plug must fit the

FRS/GMRS intercom’s DC 6V 500 mA jack. The supplied adapter meets

these specifications. Using an adapter that does not meet these specifications could

damage the FRS/GMRS intercom or the adapter.

lAlways connect the AC adapter to the FRS/GMRS intercom before you connect it to AC

power. When you finish, disconnect the adapter from AC power before you disconnect if

from the FRS/GMRS intercom.

1. Insert the supplied AC adapter’s barrel plug

into the DC 6V 500 mA jack on the back of

the FRS/GMRS intercom.

2. Route the adapter cord into the groove on the

back of the intercom.

3. Plug the adapter into a standard AC outlet.

4. Raise the antenna to a vertical position.

Mounting on a Wall

Note: To mount the FRS/GMRS intercom on a wall, you need two screws (not supplied) with

heads that fit the keyhole slots on the bottom of the FRS/GMRS intercom.

1. Drill two holes 2¾ inches (70 mm) apart. Then thread a screw into each hole, letting the

screw heads extend about -inch (3.5 mm) from the wall.

TEKCOM Industries Limited

Page 3of 9

2. Insert the supplied AC adapter’s barrel plug into the DC 6V 500 mA jack on the back of

the FRS/GMRS intercom.

3. Route the AC adapter’s cord into the strain relief groove on the bottom left of the

FRS/GMRS intercom, then plug the adapter into a standard AC outlet.

4. Place the FRS/GMRS intercom’s two keyhole slots over the screws and slide the

FRS/GMRS intercom down to secure it.

5. Raise the antenna to a vertical position.

SETTING THE QUIET CODE AND CHANNEL

The quiet feature lets you communicate with another radio which uses the same channel and

CTCSS (quiet) code as your radio.

FCC INFORMATION

Important: Do not open your radio to make any internal adjustments. Your radio is set up to

transmit a regulated signal on one of 22 assigned frequencies. It is against the law to alter or

adjust the settings inside the radio to exceed those limitations. Any adjustments to your radio

must be made by a qualified technician using the proper test equipment.

To be safe and sure:

lNever open your radio’s case.

lNever change or replace anything in your radio except the batteries.

Your radio might cause TV or radio interference even when it is operating properly. To

determine whether your radio is causing the interference, turn it off. If the interference goes

away, your radio is causing it. Try to eliminate the interference by:

lmoving your radio away from the receiver

lcalling your local RadioShack store for help

If you cannot eliminate the interference, the FCC requires that you stop using the radio.

TEKCOM Industries Limited

Page 4of 9

This device complies with Part 15 of theFCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

SAFETY INFORMATION

Your wireless transceiver contains a radio frequency transmitter. When The PTT button Is

pushed the trasmitter sends out (RF) signals.

CAUTION:

To comply with FCC RF exposure a separation distance of at least 8 inches (20 cm) must be

maintained between the antenna of this transmittre and all persons , during normal operation

The antenna used for this transmitter must not be co-located or operating in conjunction with

any other antenna or transmltter. Unauthorized antenas, modifications, or attachments could

damage the transceiver and may violate FCC regulations.

CAUTION:

DO NOT transmit for more than 50% of total use time (50% duty cycle). Transmitting more

than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded.

Failure to observe these restrictions is in violation with the FCC rules.

GMRS License:

Use of GMRS radios within the United States requires a FCC GMRS license, An individual

18 years of age or older, who is not a representative of a foreign government is eligible to

apply for a GMRS system license. You will need two forms from the FCC, FCC Form 159

and FCC FORM 605 Main Form and Schedule F. You can find the forms online at

http://www,fcc,gor/formpage.html,or call 1-800-418-3676.

USING THE RADIO

A. DISPLAY

Your radio comes with a multifunction backlighted display. By pressing any button except

PTT, the backlight will illuminate for 15 seconds.

TEKCOM Industries Limited

Page 5of 9

1. : Displays when the MENU is selected.

2. M2 display the second memory channel.

3. Display the first memory channel.

4. “SCAN” : Displays when the scan mode is activated.

5. “DUAL” : Displays when the dual-watch function is activated.

6. “ ”:Displays when the key tone function is activated.

7. “ ”:Displays when the working channel is set to be skipped.

8. “VOX” Display when VOX is activated.

9. “QUIET”: Displays when the QUIET mode is enabled.

10. Shows the selected privacy code number.

11. Shows the selected channel number.

12. Display the third memory channel.

13. “”: Displays when the keypad lock is activated.

14. C-TONEDisplay when overtone is set.

15. “BUSY” : Displays when a call is being received.

16. “ ”:Displays when your radio is transmitting or the CALL button is pressed.

B. FUNCTION AND LOCATION OF THE CONTROLS

TEKCOM Industries Limited

Page 6of 9

1. Power Jack

Just plug the station into the DC outlet of included DC adapter ,then connect the adapter to a

standard AC outlet.

2. Rod Antenna

Adjust antenna will let you have a better performance of communication.

3. VOX Sensitivity Control

Rotate this control to adjust the VOX sensitivity.

4. “ON/OFF” Volume Control.

In “OFF” position, your transceiver is off. Rotate this control clockwise to turn on your radio

and adjusts the volume, until you get a comfortable listening level.

5. CH /Scan/Skip

Press CH to move one channel higher. Press and hold CH for more than 1.5 seconds

to enter into the scan upwardly mode. PressCH will change the scanning direction.

Scan

User can choose a desired channel from being scanned. Press CH or to go to the

desired channel. Press MON key and hold for more 1.5 seconds, then press CH key to

skip this channel from scanning. Icon “ ” is on to indicate this working channel is set to be

skipped.

TEKCOM Industries Limited

Page 7of 9

Skip

Press MON key and hold for more than 1.5 seconds, then press CH key to activate or

deactivate Skip function. Icon “ ” will be shown if activated.

6. Talk Botton

To talk, hold down the Talk. Speak into the microphone in a normal tone of voice when the

icons is displayed. When you finish speaking, release the Talk button.

7. MON Button / MCU Reset Button / Keylock

To hear everything happening on a channel, including weak transmission, hold down MON

button for more than 1.5 seconds. Re lease theMON button to turn the auto-squelch back on.

Holding the MON button while turning on the radio will resume your radio’s MCU and the quiet

code will be reset to number 12, QUIET privacy mode operation is deactivated, keypad lock

disabled, backlight switched off and channel setting will go to number 1.

When the unit is reset, memory channel M1, M2, M3 will go to CH1, CH2, CH3 without QUIET

code.

Your can also lock your radio setting to avoid accidental pressing of keys by activating the

keypad lock. Press and hold the MON button, then press the QUIET button to activate or

deactivate the keypad lock.

8. QUIET /QUIET Scan Button

Press QUIET button to enable or disable theQUIET privacy mode operation.

ａ） Hold down QUIET button for 2 seconds until QUIET is displayed and the quiet code

flashes.

ｂ） Repeatedly press (or hold down) CH or CH until you see the code number you want

to use.

ｃ） Press QUIETbutton to store the code.

To turn on the quiet feature, press QUIET. QUIET appears. To turn off the feature, press

QUIETuntil QUIETdisappears.

Note: We recommend that you select a quiet code from the range 7-30. If you select a code

below or above that range, you must wait 1 to 2 seconds after holding downTALK before you

start talking.

QUIET Scanning

Press Quiet key for more than 1.5 seconds, then press “ ” for 1.5 seconds, quiet begin

scanning, scan icons of “SCAN” will be lightened on LCD. When received the same QUIET

code, the scanning stops and will keep scanning after the signal disappears. Press any key

will exit and return to the normal working channel.

TEKCOM Industries Limited

Page 8of 9

9. CH / CALL

Press CH to move one channel down. Press and hold CH for more than 1.5 seconds

to enter into call function. “ “Will be displayed.

A ringer sound on all radios tuned to the same FRS/GMRS channel and/or the privacy code

as your radio.

10. VOX button / C-Tone / Key-Tone

Press “VOX” and it will display, VOX is activated, then press “VOX”. “VOX” will deactivated,

to adjust VOX knob will change sensitivity of VOX.

Press and hold the VOX for more than 1.5 seconds, C-Tone will flash. Press or to

switch the function to “ON” or “OF”. Press VOX again will flash. Press or will

determinekey-tone.

12. External Mic/Spk Jack

Connect an optional speaker/microphone or earphone in this jack.

14. M1 (M2 or M3)/ Dual Watch

Press M1 (M2 or M3) for more than 1.5 seconds to switch the unit to the channel and QUIET

code stored at this location.

Dual Watch

It can be activated or deactivated by pressing the MON key and follow by M1 (M2 or M3).

‘DUAL’ icon will be shown on the LCD if activate. During Dual-Watching, upon receiving a

signal from the normal working channel or M1 (M2 or M3) channel, the unit will stop at that

channel. If the signal is gone, the unit will resume Dual-Watch.

Note: You can only communicate with another radio that is using the same channel and/or the

samequiet code as your radio.

TEKCOM Industries Limited

Page 9of 9

TECHNICAL SPECIFICATIONS

RX Frequency..........................................................................................462-467 MHz

Channels...................................................................................................................22

Modulation type........................................................................................................FM

Antenna impedance..........................................................................................50 Ohm

Microphone...........................................................................................condenser type

Power supply..........................................................................................DC 6V

Sensitivity at 12dB Sinad.....................................................................................0.5µV

Adjacent Channel Rejection..................................................................................45dB

Audio Squelch .......................................................................................................Auto

Audio output power...........................................................................200mW @ 8 Ohm

Audio Distortion .......................................................................................................5%

RF Output Power......................................................................500 MW ERP (FRS)

600 MW ERP (GMRS)

Harmonic Emissions............................................................................more than 50dB

Dimensions (HWD)............................................................….......178*118*36mm

Weight (without batteries)......................................................................................310g

TEKCOM Industries Limited

Page 10of 9

21-1846

Channel

Transmit

Frequency

(MHZ)

Transmit

Power

(Watts) Description

1462.5625 0.6 FRS 1/GMRS Interstitial 1

2462.5875 0.6 FRS 2/GMRS Interstitial 2

3462.6125 0.6 FRS 3/GMRS Interstitial 3

4462.6375 0.6 FRS 4/GMRS Interstitial 4

5462.6625 0.6 FRS 5/GMRS Interstitial 5

6462.6875 0.6 FRS 6/GMRS Interstitial 6

7462.7125 0.6 FRS 7/GMRS Interstitial 7

8467.5625 0.5 FRS 8

9467.5875 0.5 FRS 9

10 467.6125 0.5 FRS 10

11 467.6375 0.5 FRS11

12 467.6625 0.5 FRS 12

13 467.6875 0.5 FRS 13

14 467.7125 0.5 FRS 14

15 462.5500 0.6 GMRS Primary 1

16 462.5750 0.6 GMRS Primary 2

17 462.6000 0.6 GMRS Primary 3

18 462.6250 0.6 GMRS Primary 4

19 462.6500 0.6 GMRS Primary 5

20 462.6750 0.6 GMRS Primary 6

21 462.7000 0.6 GMRS Primary 7

22 462.7250 0.6 GMRS Primary 8

QUIET Privacy Codes Frequency: Hz

01=67.0 11=97.4 21=136.5 31=192.8

02=71.9 12=100.0 22=141.3 32=203.5

03=74.4 13=103.5 23=146.2 33=210.7

04=77.0 14=107.2 24=151.4 34=218.1

05=79.7 15=110.9 25=156.7 35=225.7

06=82.5 16=114.8 26=162.2 36=233.6

07=85.4 17=118.8 27=167.9 37=241.8

Inhaltsverzeichnis

Andere Radio Shack Zwei-Wege-Funkgerät Handbücher

Radio Shack

Radio Shack BUZZBUGGS 21-1848 Bedienungsanleitung

Radio Shack

Radio Shack Mobile CB Bedienungsanleitung

Radio Shack

Radio Shack 21-1935 Bedienungsanleitung

Radio Shack

Radio Shack Two-Way Family Radio Bedienungsanleitung

Radio Shack

Radio Shack Mobile/Marine 14-Channel FRS Radio Bedienungsanleitung

Radio Shack

Radio Shack Deluxe 2-Way Personal FRS Radio Bedienungsanleitung

Radio Shack

Radio Shack 22 Ch GMRS/FRS Two-way Radios Bedienungsanleitung

Radio Shack

Radio Shack FRS Bedienungsanleitung

Radio Shack

Radio Shack 21-417 Bedienungsanleitung

Radio Shack

Radio Shack Two-Way Personal Radio Bedienungsanleitung

Radio Shack

Radio Shack TRC-92 Bedienungsanleitung

Radio Shack

Radio Shack 21-1620 Bedienungsanleitung

Radio Shack

Radio Shack TRC-239 Bedienungsanleitung

Radio Shack

Radio Shack 19-1208 Bedienungsanleitung

Radio Shack

Radio Shack FRS-101 Bedienungsanleitung

Radio Shack

Radio Shack TRC-519 Bedienungsanleitung

Radio Shack

Radio Shack FRS Bedienungsanleitung

Radio Shack

Radio Shack TRC-93 Bedienungsanleitung

Radio Shack

Radio Shack TRC-232 Bedienungsanleitung

Radio Shack

Radio Shack 21-1901 Bedienungsanleitung

Radio Shack

Radio Shack TRC-499 Bedienungsanleitung

Radio Shack

Radio Shack 21-1902 Bedienungsanleitung

Radio Shack

Radio Shack TRC-236 Bedienungsanleitung

Radio Shack

Radio Shack 21-1599 Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung