RAEV BULLET X Bedienungsanleitung
User Manual of Electric Bicycle
BULLETX
01
1.Basic Information..........................................................02
1.1 Unpacking Information .........................................................02
1.2 Parts Description ......................................................................03
2.Installation Procedure.........................................04
2.1 Handlebar Installation ..........................................................04
2.2 Front Wheel Installation .....................................................04
2.3 Pedal Installation .....................................................................05
2.4 Battery Installation and Removal ................................06
3.Battery Charging ..........................................................07
4.Riding Introduction ....................................................08
4.1 Riding Mode ................................................................................08
4.2 Introduction to Instrument Key Functions ...........09
5.Precautions about Use.......................................10
5.1 Compliance with Traffic Laws and Traffic Safety Tips.........10
5.2 Safety Precautions about Electric Bicycle .............10
5.3 Preparation for Riding .........................................................10
5.4 Code Position Diagram .......................................................10
1.Basic Information..........................................................02
1.1 Unpacking Information .........................................................02
1.2 Parts Description ......................................................................03
2.Installation Procedure.........................................04
2.1 Handlebar Installation ..........................................................04
2.2 Front Wheel Installation .....................................................04
2.3 Pedal Installation .....................................................................05
2.4 Battery Installation and Removal ................................06
3.Battery Charging ..........................................................07
4.Riding Introduction ....................................................08
4.1 Riding Mode ................................................................................08
4.2 Introduction to Instrument Key Functions ...........09
5.Precautions about Use.......................................10
5.1 Compliance with Traffic Laws and Traffic Safety Tips.........10
5.2 Safety Precautions about Electric Bicycle .............10
5.3 Preparation for Riding .........................................................10
5.4 Code Position Diagram .......................................................10
6.Battery ...........................................................................................11
6.1 Precautions about Use of Lithium Battery .............11
6.2 Operating Environment .....................................................11
6.3 Charging Environment .......................................................12
6.4 Storage Environment ...........................................................12
7.Technical Parameters ..........................................13
8.Parameter Settings..................................................14
9.Error Code and FAQs.............................................16
9.1 Error code .....................................................................................17
9.2 FAQs .................................................................................................18
Contents
User Manual
1. Basic Information
RL
02
1x Bicycle
1x Wheel
2x Pedal
1x Charger
2x Keys
5x Tools
1x User Manual
1.1 Unpacking Information
1x Bicycle 1x Wheel
1x Charger
2x Pedal
5x Tools
1x User Manual
2x Keys
1.2 Parts Description
Cushion
Rear reflector
Handle
Motor
Tensioner
Pedal
Controller
LCD Display
Brake handlebar
Car light
Battery
Switch
Charging hole
Front
Disc Brake
Front fork
03
90°
Remove the pre-tightened set screws of the handlebar end cover using 4mm socket head wrench
Place the handlebar, adjust it to a suitable angle, close the end cover of the handlebar and pre-tighten 4 screws
using 4mm socket head wrench
Tighten set screws of the handlebar end cover in the order of1, 2, 3 and 4
Align the f ront disc at the space of the gateway lining, align the f ront axle at the front fork axle hole and insert it
into the hole
Install gaskets and capnuts on both sides
Tighten cap nuts onboth sides using 15mm open spanner
14
2
3
2. Installation Procedure
2.1 Handlebar Installation
2.2 Front Wheel Installation
04
2.3 Pedal Installation
Differentiate the identifiers of left and right pedals, L means left pedal and R means right pedal
When installing pedals, keep the pedal bolt end face vertical to the mounting hole of the crank and tighten and
fix it using 15mm open spanner
(When installing the left pedal, rotate itanticlockwise; when installing the right pedal, rotate it clockwise)
L
L
R
R
R
L
L
R
During installation
Align the left to left and
the right to right
L R
05
2.4 Battery Installation and Removal
Inset the key, rotate it to ON state and place the battery in the bodypreset position;
Forcibly push the battery downward to the bottom
Rotate the key to Lock state and pull itout
06
Open the soft cover on the battery side
Insert the plug of the charger into the charging port of the battery and connect the other plug to the power supply
The status light of the charger is red
After the battery is fully charged, the status light of the charger is green
Remove the charger, keep itproperly and close the soft cover
If the battery is charged on board, pleasepower off the instrument
3. Battery Charging
Charging Port
switch
Soft cover
Usb
07
4.1 Riding mode
4.Riding Introduction
In EV mode, press and hold ON. After power-off, adjust the gears (1-3) by Instrument ± Key, and pull the speed
thumb shifter to enter EV mode
In assistant mode, press and hold ON. After power-on, adjust the gears (1-3) by Instrument± Key, step on the
pedal for more than half a cycle to enter assistant mode
In manual riding mode-press and hold ON. After power-on, adjust the gear (0) by Instrument ± Key, and step on
the pedal to enter manual riding mode
The electric mode has a top speed of 12mph in first gear, 16mph in second gear and 20mph in third gear
08
Brake handlebar
Handlebar grip
Instrument
Handle
Horn button
ON/OFF: Press and hold ON for more than 2s to turn on the power; in startup state, press and hold ON for more than 2s to turn
off the power
M mode key: In startup state, the displayed information is switched among total distance (mileage/h), trip distance
(mileage/h), riding time (h), total distance (mileage/h), maximum speed (mileage/h) and average speed (mileage/h)
± key: In startup state, press and hold + for 2s to turn on the instrument backlight and turn on the headlamp. When the
headlamp is turned on, press and hold for 2s to turn off the headlamp. Short press ± to switch among assistance gears (0-3) of
the electric bicycle. Gear 1 means that the instrument is turned on, and gear 0 means parking mode and no motor output
4.2 Introduction to Instrument Key Functions
Km/h
MPH
Mile
Km
AVG MAX
Trip
Time
ODO
09
UP key
Speed mode
Headlight indication
Speed display
Mileage mode
Power indication
Mileage indication
Fault prompt
Gear indication
Down key
ON/OFF key
Mode key
Inhaltsverzeichnis
