Raidon Intank ir2622 Bedienungsanleitung

InTANK

iR2622

User Manual

Your Data Security Guardian

iR2622 User Manual

» InTANK iR2622 User Manual ……………………………………………….3

» InTANK iR2622 產品使說明 ….…………………………..………………14

iR2622 User Manual

Thank you for purchasing RAIDON products. This manual will introduce the InTANK iR2622 Series.

Before using your InTANK iR2622, please read this manual thoroughly. Although all information

contained in this user manual has been carefully verified before publishing, however, the actual

product specification will be based on the time of delivery from RAIDON. Any updates to the product

specifications or relevant information may be found on www.raidon.com.tw. Products are subject to

change without prior notifications.

If you have any questions regarding the products of RAIDON, or you would like to know the latest

product information, user manual update, or firmware update, please contact your local supplier or

visit www.raidon.com.tw for further information.

1. Package Contents and Product Views

2. Operating Information

3. Hardware Requirements and Precautions

4. Hardware Installation Procedure

5. Setting RAID Mode

6. Computer Set Up

7. Hard Disk status on LCD screen

8. Data Rebuilding Operation

9. GUI Monitoring Software and Firmware Update GUI

10. Frequently Asked Questions

Open the package and you should find the following:

Please make sure that the contents listed above are not damaged or missing. If you should find

damages or missing contents, please contact your supplier immediately.

Introduction

Table of Contents

1. Package Contents and Product Views

iR2622

iR2622ｘ1( with removable drive tray enclosed x2)

Internal RS232 Cable x 1

External RS232 Cable ｘ1

SATA Cable ｘ1

CD-Rom ｘ1

Accessories Kit bag ｘ2

Quick Installation Guide x 1

iR2622 User Manual

Product View

1. LCD Display

2. LED of failure Alarm

3. Pri. HDD status indicator

4. Sec. HDD status indicator

5. Mute Button

6. Removable drive tray

7. HDD tray key lock

8. HDD Access

9. Cooling fan

10. RAID mode switch

11. RS232 Port

12. SATA Port

13. 15 PIN Power Connector

14. 4Pin Power Connector

LED Indicators :

Status

Fail LED

HDD 1

HDD 2

TRAY 1

TRAY 2

Buzzer

Stand by

——

Orange / light on

Blue / light on

——

HDD Failure

Red / light on

——

Red / light on

Access

——

Orange / light on

Blue and Purple / blinking

——

Rebuilding(Source)

——

Orange / light on

Blue / light on

——

Rebuilding(Target)

——

Red / blinking

——

Fan Failure

Red / light on

——

Over Heat(≥50 "C)

Red / light on

——

iR2622 User Manual

Operating Temperature : 0 ~ 40 "C (32 ~ 104 "F)

Storage Temperature : -10 ~ 70 "C (14 ~ 158 "F)

Line Voltage : 100 ~ 240V AC

1. Computers or servers with SATA I & SATA II & SATA III.

2. Hard drive with SATA I & SATA II & SATA III

3. You are strongly advised to set the storage mode (the default is the Independent mode) before

using the iR2622.

4. The product allows the user to simultaneously utilize two hard drives manufactured by different

companies. However, if the user expects better efficiency, we strongly recommend the users to

use hard drives manufactured by the same manufacturer.

5. Please make sure that the two hard drives are free from bad blocks or defects prior to

installation in order to avoid system crashes or data loss.

6. The actual storage capacity of iR2622 recognized by the system may differ from the total

capacity stated on the hard drives combined once the drives have been formatted.

7. It is highly recommended for users to back up important data contained within the iR2622 unit

on a regular basis or whenever the user feels necessary to a remote or a separate storage

device. Stardom will not be responsible for any lost of data caused during the use of the unit or

the recovery of the data lost.

Please follow the instructions below to complete the hardware installation.

Step 1 Open the package and take out the product making sure that all the enclosed contents are

not damaged or missing. Should you find damages or missing contents, please contact your

supplier immediately.

Step 2 Place the system on a stable surface. Ensure that it is well ventilated without blockage to the

vent and kept away from areas near water and damage prone areas.

Step 3 Use the key included in the accessory kit and inserted into the key access opening to eject

the removable drive tray latch and extract the removable drive tray.

Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws included

in the accessory kit to avoid any damage to the hard drive due to accidental movements.

Step 5 When the hard drive installation has been completed, insert the hard drive tray into the

system horizontally and secure the latch into place.

Step 6 Use the preferred cable included to connect your computer to the relative interface

connection on the iR2622 unit.

2. Operating Information

3. Hardware Requirements and Precautions

Note：

Once the drive mode configuration has been completed, re-configuration using the same hard drives to set

the drive mode will result in complete data loss. If you must change the drive mode, make sure to backup all

data prior to the mode change.

4. Hardware Installation Procedure

iR2622 User Manual

※Note :

1. RS232 Port and RS232 Cable: Provides hardware status monitoring to industrial control system or IPC via RS232.

2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty

will not cover the damages caused by unauthorized disassembling.

3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedicated power connection of

a stable power input.

Please select the RAID mode with the jumper located at the back panel. The original default is RAID

1, still there are three pins at the back panel for RAID mode selection: RAID 0 mode by setting the

jumper on the bottom of the two pins. RAID 1 mode by setting the jumper on the top of the two pins.

1. RAID 1 Mode

1). Place two new hard drives into iR2622 and strongly suggest you to use two identical hard

drives to get the equal capacity. If the capacity is different, iR2622 is downward to the small hard

drive capacity.

2). Under RAID 1 mode, two hard drives has the identical information as one to mirror to the other

one, therefore each of the hard drive failed is still able to function normally. When you replace the

failed hard disk to the new one the system automatically rebuilding the data to the newly place

hard disk.

2. RAID 0 Mode

1). Place two new hard drives into iR2622 and strongly suggest you to use two identical hard

drives to get the equal capacity. If the capacity is different, iR2622 is downward to the small hard

drive capacity.

2). Under RAID 0 mode, capacity is add up to a one big volume, also with the feature of faster

read/write performance efficient.

5. Setting the Hard Drive Array Mode

SATA

45cm SATA Cable

Power Supply Connector

Internal Case

Internal RS232 Cable

External RS232 Cable

iR2622

COM1

COM2

iR2622 User Manual

When the hardware setup for iR2622 is complete, you are now ready to turn the machine on.

After the hardware installation is complete, the iR2622 will be treated as one single hard drive. Set

the hard drive to AUTO in the computer’s BIOS. When the computer is turned on, the system will

retrieve the following information:

1. In iR2622, the installed hard drive can be detected by the Device Manager of Computer

Management for Windows.

2. Customers can choose to format the hard drive by using the Disk Management tool of the

operating system before using the iR2622.

At this point, the installation process is completely finished. The user can freely retrieve and save

data to iR2622 just like retrieving and saving data to a regular hard drive. If the user experiences

any abnormality during the operation, please refer to the trouble shooting Q&A section in Appendix.

6. Computer Set Up

iR2622 User Manual

1. Booting and Normal status.

2. Over Temperature (≥50 "C)

3. Fan Failure.

4. RAID 1 Degraded. Primary hard drive is failure, but secondary hard drive is normal.

5. RAID 1 Failure. Primary and secondary hard drives are failure.

6. RAID 1 Failure. (Double Source)

7. RAID 0 Failure. Primary hard drive is missing, but secondary hard drive is normal.

8. Rebuilding

7. Hard Disk status on LCD screen

Pri HDD : OK

Sec HDD : OK T

Pri HDD : OK F

Sec HDD : OK

RAID-1 degraded

Pri : X Sec : O

RAID-1 failure

Pri : X Sec : X

RAID-1 failure

Double Source

RAID-0 failure

Pri : M Sec :O

Rebuilding

Sec→Pri 32%

iR2622

RAID-1 vxxxxxx.x

Pri HDD : OK

Sec HDD : OK

iR2622 User Manual

The hard drive Hot Swap and Auto Rebuilding functions are available.

Off-line Back up When the data is stored within iR2622, the user can remove one of the hard drives

from iR2622 as back up drive for data such as system operation file, secured files, seldom modified

files or image and music files. The user can periodically insert the hard drive back into iR2622 to

execute automatic backup to protect the system from being hit by computer virus or to avoid risk of

having both hard drives failing at the same time.

When one of the two hard drives fails in the iR2622 system, the system will alarm the hard drive

failure message both on the LCD display screen and in the monitoring software. The user can

remove the failed hard drive from the system while the system is still in operation without shutting

down the machine. If the failed hard drive is replaced shortly, the system will automatically execute

the Auto Rebuilding function without affecting the system operation and without any operation

command from the user.

When the iR2622 detects a hard drive missing or a hard drive failure, the Buzzer will start and the

LCD display screen will display the following messages:

After removing the failed hard drive and replacing with a new hard drive, if the hard drive is properly

installed, the LCD display screen will display the following messages:

After few seconds of installing the new hard drive, the LCD display screen will display the data

rebuilding progress:

When the rebuilding is fully completed, the LCD display screen will again display the following

messages:

RAID-1 degraded

Pri : X Sec : O

Pri HDD : OK

Sec HDD : Insert

Pri HDD :Insert

Sec HDD : OK

Rebuilding

Sec→Pri 32%

Rebuilding

Pri→Sec 32%

Pri HDD : OK

Sec HDD : OK

8. Data Rebuilding Operation

iR2622 User Manual

You can install GUI software to monitor the status of iR2622. This can be done by installing software

from CD.

※The HDD1 equals to Pri HDD and HDD2 equals to Sec HDD.

1. System Status

This GUI will auto detects the connected iR2622 and reveals relative information accordingly.

2. Firmware Upgrade

You may update the Firmware via this GUI, simply click on “Load” button to locate the firmware

file to proceed. After update is finished, you may restart the power properly to operate with newly

updated firmware.#

※Caution : Any random firmware updates may cause device in malfunction, it is strongly suggested not to update device firmware if

device is operating properly.

9. GUI Monitoring Software and Firmware Update

!10

Inhaltsverzeichnis

Andere Raidon Lagerung Handbücher

Raidon

Raidon InTANK HyBrid RunneR iH1010-2S-S2 Bedienungsanleitung

Raidon

Raidon InTANK iR2622S Bedienungsanleitung

Raidon

Raidon iT4300 Series Bedienungsanleitung

Raidon

Raidon SafeTANK GR5640-SB31+ Bedienungsanleitung

Raidon

Raidon SafeTANK GT4670-TB3 Bedienungsanleitung

Raidon

Raidon SafeTANK SL5640-LB2 Bedienungsanleitung

Raidon

Raidon SafeTANK GR8680-TB3 Bedienungsanleitung

Raidon

Raidon InTANK Series Bedienungsanleitung

Raidon

Raidon SafeTANK GR5640-SB3 Bedienungsanleitung

Raidon

Raidon GT8670-TB3 Bedienungsanleitung

Raidon

Raidon iR8023 Bedienungsanleitung

Raidon

Raidon SAFETANK GT4670-TB Bedienungsanleitung

Raidon

Raidon SafeTANK GR3660-TB2 Bedienungsanleitung

Raidon

Raidon InTANK iR2771-S3 Bedienungsanleitung

Raidon

Raidon SafeTANK GT2660-TB3 Bedienungsanleitung

Raidon

Raidon SR2611-2S-S2+ Bedienungsanleitung

Raidon

Raidon SOHORAID Series SR3500 Bedienungsanleitung

Raidon

Raidon InTANK iR2024 Bedienungsanleitung

Raidon

Raidon SafeTANK GT1670 Series Bedienungsanleitung

Raidon

Raidon InTANK IR2025 Bedienungsanleitung

Raidon

Raidon SafeTANK GR3660-TB3 Bedienungsanleitung

Raidon

Raidon SafeTANK GR3680 Series Bedienungsanleitung

Raidon

Raidon InTANK iR2024 Bedienungsanleitung

Raidon

Raidon InTANK iR2775-S3 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Raidon intank ir2622 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken