Raidon InTANK iR2771-S3 Bedienungsanleitung

iR2771-S3

iR2772-S3

User Manual

InTANK

» InTANK iR2771-S3 & iR2772-S3 User Manual ........................................1

» InTANK iR2771-S3 & iR2772-S3 產品使用說明 .................................... 10

iR2771-S3 & iR2772-S3 User Manual

V1.1

iR2771-S3 & iR2772-S3 User Manual

Table of Contents

1. Package Contents and Product Views

Introduction

Thank you for purchasing RAIDON products. This manual will introduce the InTANK iR2771-S3 &

iR2772-S3 Series. Before using your InTANK iR2771-S3 & iR2772-S3, please read this manual

thoroughly. Although all information contained in this user manual has been carefully veried before

publishing, however, the actual product specification will be based on the time of delivery from

RAIDON. Any updates to the product specications or relevant information may be found on www.

raidon.com.tw. Products are subject to change without prior notications.

If you have any questions regarding the products of RAIDON, or you would like to know the latest

product information, user manual update, or rmware update, please contact your local supplier or

visit www.raidon.com.tw for further information.

Open the package and you should nd the following:

1. Package Contents and Product Views

2. Operating Information

3. Hardware Requirements and Precautions

4. Hardware Installation Procedure

5. Setting RAID Mode

6. Computer Set Up

7. GUI Monitoring Software and Firmware Update GUI

8. Frequently Asked Questions

iR2771-S3 & iR2772-S3

iR2771-S3 or iR2772-S3 Device x 1 ( with removable drive tray enclosed x 2)

Screws and key x 2

Quick Installation Guide x 1

Internal RS232 Cable x1 (iR2772-S3)

• Please check the product and accessories for any defect or missing parts. If you have any questions,

please contact your product supplier.

• Please visit the o󰀩cial website (www.raidon.com.tw) to download drivers and other related resources.

iR2771-S3 & iR2772-S3 User Manual

Product View

LED Indicators :

2. Operating Information

3. Hardware Requirements and Precautions

Operating Temperature : 5 ~ 35 °C (41 ~ 95 °F)

Storage Temperature : -20 ~ 47 °C (-4 ~ 116 °F)

Line Voltage : 5V DC

1. Computers or servers with SATA I & SATA II & SATA III.

2. Hard drive with SATA I & SATA II & SATA III

HDD󶁖Idle

HDD󶁖Fail󶁖or󶁖Adsent

HDD󶁖Access

Rebuilding(Source)

Rebuilding(Target)

Light󶁖On

─󶁖─

Light󶁖On

─󶁖─

Blue󶁖LED

─󶁖─

Light󶁖On

Blinking

─󶁖─

Blinking

─󶁖─

Red󶁖LED Buzzer

iR2771-S3 & iR2772-S3 User Manual

4. Hardware Installation Procedure

Please install iR2771-S3 / iR2772-S3 as the following instruction.

Choose the RAID mode with RAID switch on the back panel. The default value is RAID 1.

Install the product unit into the computer chassis and make the necessary connections

and mount the product unit properly and securely to the bay position desired.

Step 1

Step 2

Note :

Once the drive mode conguration has been completed, re-conguration using the same hard

drives to set the drive mode will result in complete data loss. If you must change the drive

mode, make sure to backup all data prior to the mode change.

3. You are strongly advised to set the storage mode (the default is the Independent mode) before

using the iR2771-S3 / iR2772-S3.

4. The product allows the user to simultaneously utilize two hard drives manufactured by di󰀨erent

companies. However, if the user expects better e󰀩ciency, we strongly recommend the users to

use hard drives manufactured by the same manufacturer.

5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation

in order to avoid system crashes or data loss.

6. The actual storage capacity of iR2771-S3 / iR2772-S3 recognized by the system may di󰀨er from

the total capacity stated on the hard drives combined once the drives have been formatted.

7. It is highly recommended for users to back up important data contained within theiR2771-S3 /

iR2772-S3 unit on a regular basis or whenever the user feels necessary to a remote or a separate

storage device. RAIDON will not be responsible for any lost of data caused during the use of the

unit or the recovery of the data lost.

RAID 0 ModeRAID 1 Mode

iR2771-S3 & iR2772-S3 User Manual

※ Note :

1. RS232 Port and RS232 Cable: Provides hardware status monitoring to industrial control system or IPC via RS232.

2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty

will not cover the damages caused by unauthorized disassembling.

3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedicated power connection of

a stable power input.

※

Step 3

Step 4

Step 5

Step 6

Mounting Positions

Mount the hard drive onto the removable tray.

Re-insert the removable tray when completed and make sure the tray is securely inserted

into the appropriate position.

When hardware installation is completed, you can turn on the power of the main unit to

proceed with relevant settings and applications.

Installation completed. Your operating system should automatically detect the hard drives

within. Please proceed to format the drives. Once formatting is completed, you may then

start to operate the device.

iR2771-S3 & iR2772-S3 User Manual

5. Setting the Hard Drive Array Mode

6. Computer Set Up

Please select the RAID mode with the jumper located at the back panel. The original default is RAID

1, still there are four pins at the back panel for RAID mode selection: to set the RAID 0 mode, set to

. To set the RAID 1 mode, set to .

1. RAID 1 Mode

1). Place two new hard drives into iR2771-S3 / iR2772-S3 and strongly suggest you to use two

identical hard drives to get the equal capacity. If the capacity is di󰀨erent, iR2771-S3 / iR2772-S3

is downward to the small hard drive capacity.

2). Under RAID 1 mode, two hard drives has the identical information as one to mirror to the other

one, therefore each of the hard drive failed is still able to function normally. When you replace

the failed hard disk to the new one the system automatically rebuilding the data to the newly

place hard disk.

2. RAID 0 Mode

1). Place two new hard drives into iR2771-S3 / iR2772-S3 and strongly suggest you to use two identical

hard drives to get the equal capacity. If the capacity is different, iR2771-S3 / iR2772-S3 is

downward to the small hard drive capacity.

2). Under RAID 0 mode, capacity is add up to a one big volume, also with the feature of faster

read / write performance e󰀩cient.

When the hardware setup for iR2771-S3 / iR2772-S3 is complete, you are now ready to turn the

machine on.

After the hardware installation is complete, the iR2771-S3 / iR2772-S3 will be treated as one single

hard drive. Set the hard drive to AUTO in the computer’s BIOS. When the computer is turned on, the

system will retrieve the following information:

1. In iR2771-S3 / iR2772-S3, the installed hard drive can be detected by the Device Manager of

Computer Management for Windows.

2. Customers can choose to format the hard drive by using the Disk Management tool of the

operating system before using the iR2771-S3 / iR2772-S3.

iR2771-S3 & iR2772-S3 User Manual

At this point, the installation process is completely nished. The user can freely retrieve and save

data to iR2771-S3 / iR2772-S3 just like retrieving and saving data to a regular hard drive. If the user

experiences any abnormality during the operation, please refer to the trouble shooting Q&A section

in Appendix.

You can install GUI software to monitor the status of iR2771-S3 / iR2772-S3. This can be done by

installing software from CD.

※ The HDD1 equals to Pri HDD and HDD2 equals to Sec HDD.

1. System Status

This GUI will auto detects the connected iR2771-S3 / iR2772-S3 and reveals relative information

accordingly.

7. GUI Monitoring Software and Firmware Update

2. Firmware Upgrade

You may update the Firmware via this GUI, simply click on “Load” button to locate the rmware

le to proceed. After update is nished, you may restart the power properly to operate with newly

updated rmware.

iR2771-S3 & iR2772-S3 User Manual

※ Caution : Any random rmware updates may cause device in malfunction, it is strongly suggested not to update device rmware if

device is operating properly.

3. E-Mail Notify

Conguring an e-mail address for notication of drive malfunctioning or being removed.

3-1 Setup

1). Insert “Outgoing” SMTP and e-mail name and address.

2). If it is passwords required, select the option “SMTP Login Authentication” and insert the

passwords.

3). When the conguration completed, click on the “OK” button to save.

※ Device must be connected in operational states during congurations to take e󰀨ects.

3-2 HDD Fail / Device Removed

1). Insert the e-mail address of the receiver for notication and click on “+” to add the inserted

e-mail address onto the notifying list. (Maximum up to 10 e-mail addresses)

2). Insert the error message and descriptions from the columns of “Subject” and “Contents”.

3). When the conguration completed, click on the “OK” button to save.

※ Device must be connected in operational states during congurations to take e󰀨ects.

iR2771-S3 & iR2772-S3 User Manual

5. About Indicates GUI Management Software version

4. S.M.A.R.T.

Andere Handbücher für InTANK iR2771-S3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Raidon Lagerung Handbücher

Raidon

Raidon InTANK iR2823 Original Betriebsanleitung

Raidon

Raidon SafeTANK SL5640-LB2 Bedienungsanleitung

Raidon

Raidon InTANK IR2025 Bedienungsanleitung

Raidon

Raidon SafeTANK GR3660 Series Bedienungsanleitung

Raidon

Raidon SafeTANK GR3660-B3 Bedienungsanleitung

Raidon

Raidon InTANK iR2622S Bedienungsanleitung

Raidon

Raidon SafeTANK GR3680 Series Bedienungsanleitung

Raidon

Raidon SOHORAID Series SR3500 Bedienungsanleitung

Raidon

Raidon SR6600 Series Bedienungsanleitung

Raidon

Raidon InTANK iR2023 Bedienungsanleitung

Raidon

Raidon iR8023 Bedienungsanleitung

Raidon

Raidon SafeTANK GR8680-TB3 Bedienungsanleitung

Raidon

Raidon SafeTANK GR3660-TB2 Bedienungsanleitung

Raidon

Raidon safetank GR4670-WSB3 Bedienungsanleitung

Raidon

Raidon GT8670-TB3 Bedienungsanleitung

Raidon

Raidon InTANK iR4300-S2 Bedienungsanleitung

Raidon

Raidon intank ir2622 Bedienungsanleitung

Raidon

Raidon InTANK iR2022 Bedienungsanleitung

Raidon

Raidon iR2774C-S3 Bedienungsanleitung

Raidon

Raidon SafeTANK GR3630-SB3 Bedienungsanleitung

Raidon

Raidon SR2611-2S-S2+ Bedienungsanleitung

Raidon

Raidon InTANK Series Bedienungsanleitung

Raidon

Raidon SafeTANK GR5640-SB31+ Bedienungsanleitung

Raidon

Raidon SafeTANK GT1670 Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung