R&S TSVP Bedienungsanleitung
R&S®TSVP
Production Test Platform
Getting Started
1152394362
Version 07
(;ÂW[Ì)
This manual describes the following R&S®TSVP models and options:
●R&S®Compact TSVP R&S®TS-PCA3 (1152.2518.02)
●R&S®PowerTSVP R&S®TS-PWA3 (1157.8043.02)
© 2021 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1152.3943.62 | Version 07 | R&S®TSVP
The following abbreviations are used throughout this manual: R&S®PCA3 is abbreviated as R&S PCA3,
R&S®PWA3 is abbreviated as R&S PWA3.
1171.1307.52 - 05
1
Safety Instructions
Instrucciones de seguridad
Sicherheitshinweise
Consignes de sécurité
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric shock, fire,
personal injury or instrument damage.
●Do not open the instrument casing.
●Read and observe the "Basic Safety Instructions" delivered as printed brochure with
the instrument.
●Read and observe the safety instructions in the following sections.
Note that the data sheet may specify additional operating conditions.
●Keep the "Basic Safety Instructions" and the product documentation in a safe place
and pass them on to the subsequent users.
Riesgo de lesiones y daños en el instrumento
El instrumento se debe usar de manera adecuada para prevenir descargas eléctricas,
incendios, lesiones o daños materiales.
●No abrir la carcasa del instrumento.
●Lea y cumpla las "Instrucciones de seguridad elementales" suministradas con el
instrumento como folleto impreso.
●Lea y cumpla las instrucciones de seguridad incluidas en las siguientes secciones.
Se debe tener en cuenta que las especificaciones técnicas pueden contener
condiciones adicionales para su uso.
●Guarde bien las instrucciones de seguridad elementales, así como la
documentación del producto, y entréguelas a usuarios posteriores.
1171.1307.52 - 05
2
Gefahr von Verletzungen und Schäden am Gerät
Betreiben Sie das Gerät immer ordnungsgemäß, um elektrischen Schlag, Brand,
Verletzungen von Personen oder Geräteschäden zu verhindern.
●Öffnen Sie das Gerätegehäuse nicht.
●Lesen und beachten Sie die "Grundlegenden Sicherheitshinweise", die als
gedruckte Broschüre dem Gerät beiliegen.
●Lesen und beachten Sie die Sicherheitshinweise in den folgenden Abschnitten;
möglicherweise enthält das Datenblatt weitere Hinweise zu speziellen
Betriebsbedingungen.
●Bewahren Sie die "Grundlegenden Sicherheitshinweise" und die
Produktdokumentation gut auf und geben Sie diese an weitere Benutzer des
Produkts weiter.
Risque de blessures et d'endommagement de l'appareil
L'appareil doit être utilisé conformément aux prescriptions afin d'éviter les
électrocutions, incendies, dommages corporels et matériels.
●N'ouvrez pas le boîtier de l'appareil.
●Lisez et respectez les "consignes de sécurité fondamentales" fournies avec
l’appareil sous forme de brochure imprimée.
●Lisez et respectez les instructions de sécurité dans les sections suivantes. Il ne faut
pas oublier que la fiche technique peut indiquer des conditions d’exploitation
supplémentaires.
●Gardez les consignes de sécurité fondamentales et la documentation produit dans
un lieu sûr et transmettez ces documents aux autres utilisateurs.
Contents
R&S®TSVP
3Getting Started 1152.3943.62 ─ 07
Contents
1 Documentation Overview......................................................5
2 Installation..............................................................................7
3 Product Overview.................................................................. 9
3.1 Production Test Platforms................................................................... 9
3.1.1 R&S TS-PCA3........................................................................................ 9
3.1.2 R&S TS-PWA3........................................................................................9
3.2 Software Components........................................................................10
3.2.1 R&S GTSL............................................................................................ 10
3.2.2 R&S EGTSL..........................................................................................12
3.2.3 R&S IC-Check.......................................................................................13
3.3 Test Modules....................................................................................... 14
3.3.1 R&S TS-PAM........................................................................................ 14
3.3.2 R&S TS-PICT........................................................................................14
3.3.3 R&S TS-PDFT...................................................................................... 15
3.3.4 R&S TS-PFG........................................................................................ 15
3.3.5 R&S TS-PHDT...................................................................................... 16
3.3.6 R&S TS-PIO2........................................................................................17
3.3.7 R&S TS-PIO4........................................................................................17
3.3.8 R&S TS-PIO5........................................................................................18
3.3.9 R&S TS-PIO3B..................................................................................... 19
3.3.10 R&S TS-PMB........................................................................................ 19
3.3.11 R&S TS-PSAM......................................................................................20
3.3.12 R&S TS-PSM1...................................................................................... 21
3.3.13 R&S TS-PSM2...................................................................................... 21
3.3.14 R&S TS-PSM3...................................................................................... 22
Contents
R&S®TSVP
4Getting Started 1152.3943.62 ─ 07
3.3.15 R&S TS-PSM4...................................................................................... 23
3.3.16 R&S TS-PSM5...................................................................................... 23
3.3.17 R&S TS-PSU........................................................................................ 24
3.3.18 R&S TS-PSU12.................................................................................... 25
3.4 In-System Calibration......................................................................... 25
4 GTSL download from GLORIS............................................27
4.1 New in GLORIS? Learn how to register............................................27
4.2 Download Area....................................................................................28
4.3 Which Version of GTSL should I install on my TSVP System?...... 30
5 Contacting Customer Support........................................... 32
Documentation Overview
R&S®TSVP
5Getting Started 1152.3943.62 ─ 07
1 Documentation Overview
This section provides an overview of the R&S TSVP system user documentation.
The user documentation includes operating manuals, technical information and
data sheets for the base units R&S CompactTSVP and R&S PowerTSVP, plus
associated measurement modules as well as a service manual as PDF files.
All documents are delivered with the Generic Test Software Library ("R&S GTSL")
installation package. After installing the software, you can open all the documen-
tation from the Windows start menu. Additionally you can find detailed information
about the call interfaces in the "R&S GTSL Help" folder of Windows start menu.
The user documentation and "R&S GTSL" installation package are also available
for download in Gloris.
https://gloris.rohde-schwarz.com/
Getting started manual
Introduces the R&S TSVP system and describes how to set up and turn on the
products. A printed version is included in the delivery.
System manual
Contains information about the system and its hardware and software compo-
nents, including installation instructions and use case examples.
User manuals
Describe the features and functions of the system components. They also pro-
vides information on maintenance, instrument interfaces and error messages.
User manuals are available for all system components (hardware and software).
Service manual
Describes the performance test for checking the rated specifications, module
replacement and repair, troubleshooting and fault elimination, and contains spare
part lists.
Basic safety instructions
Contains safety instructions, operating conditions and further important informa-
tion. A printed version is included in the delivery.
Documentation Overview
R&S®TSVP
6Getting Started 1152.3943.62 ─ 07
Data sheet
The data sheet contains the technical specifications of the system. It also lists the
options and their order numbers as well as optional accessories.
Release notes and open source acknowledgment
The release notes list new features, improvements and known issues of the cur-
rent firmware version.
The open source acknowledgment document provides verbatim license texts of
the used open source software.
Installation
R&S®TSVP
7Getting Started 1152.3943.62 ─ 07
2 Installation
Before putting the unit into operation for the first time, be sure to read and
observe the important safety and operating instructions supplied in the operating
manual.
If the software is not already installed, read the readme.txt file in the main
directory of the software package to determine the requirements and the proce-
dure for installing the software.
If your CompactTSVP is equipped with an internal system controller, you can put
the instrument into operation as follows after connecting a monitor, keyboard and
mouse:
1. Switch on the R&S TSVP at the rear.
2. Log on under Windows (no password!).
3. Start the "R&S GTSL TSVP Self Test" in Windows start menu. Details of the
self-test are described in the "Service Manual CompactTSVP and Pow-
erTSVP".
If your CompactTSVP should be controlled by an external computer with help of a
compact PCI bridge solution, you can put the instrument into operation as follows:
1. Install the R&S GTSL package on your computer. See "R&S GTSL Software
Description" for details.
2. Install the bridge module into your computer. Refer the appropriate manual
how to install the PC card and how to connect the components.
3. Connect the CompactTSVP to the computer.
4. Power on the CompactTSVP first.
5. Power on your computer.
6. Start the R&S GTSL "Instrument Soft Panels" application from the start menu.
All installed TSVP modules should be listed in the main window. In the "Tools"
menu use the option "Create Physical.ini…" to automatically generate the
configuration file. See "R&S GTSL Software Description" for details.
7. Start the "R&S GTSL TSVP Self Test" application from the Windows start
menu. Details of the self-test are described in the "Service Manual Com-
pactTSVP and PowerTSVP".
Installation
R&S®TSVP
8Getting Started 1152.3943.62 ─ 07
The selftest checks whether the instrument is operating properly.
The SFT report is stored on Windows XP systems in the file
C:\Program Files\Rohde&Schwarz\GTSL\SFT_Report.txt.
On Windows 7 systems you can find the report in
C:\Rohde&Schwarz\GTSL\SFT_Report.txt.
On Windows 10 systems you can find the report in
C:\Users\Public\Public Documents\Rohde-Schwarz\GTSL.
In case of problems concerning the software or hardware installation, the chapter
"Installation of R&S CompactTSVP and R&S GTSL" of the "R&S System Manual
TSVP" may help. It describes known issues along with possible solutions.
Inhaltsverzeichnis
Andere R&S Prüfgeräte Handbücher
R&S
R&S RTB2000 Bedienungsanleitung
R&S
R&S HMO72 Series Bedienungsanleitung
R&S
R&S RTM2000 Series Bedienungsanleitung
R&S
R&S EDST300 Bedienungsanleitung
R&S
R&S RTB2K-COM4 Bedienungsanleitung
R&S
R&S ESU Series Bedienungsanleitung
R&S
R&S RTO2000 Bedienungsanleitung
R&S
R&S QAR50 Bedienungsanleitung
R&S
R&S ZV-Z51 Handbuch
R&S
R&S RTC1000 Bedienungsanleitung
R&S
R&S RTA4000 Bedienungsanleitung
R&S
R&S RTM2022 Bedienungsanleitung
R&S
R&S RTC1K-COM2 Bedienungsanleitung
R&S
R&S ZN-Z103 Bedienungsanleitung
R&S
R&S CMW-KG4 Series Bedienungsanleitung
R&S
R&S CMW-KG8 Series Bedienungsanleitung
R&S
R&S RTA4000 Bedienungsanleitung
R&S
R&S RTO2000 Bedienungsanleitung
R&S
R&S CMW-KM5 Series Bedienungsanleitung
R&S
R&S RTO Bedienungsanleitung
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung