Rapid EN330 Bedienungsanleitung

EN330

Operating instructions

ELECTRIC NAILER

ELEKTRONAGLER

CLOUEUSE ELECTRIQUE

ELEKTRISCHE NAGELTACKER

CHIODATRICE ELETTRICA

CLAVADORA ELÉCTRICA

PREGADOR ELÉTRICO

ELEKTRISK DYCKERTPISTOL

ELEKTRISK SØMPISTOL

ELEKTRISK SPIKERPISTOL

SÄHKÖINEN NAULAIN

SZTYFCIARKA ELEKTRYCZNA

ЭЛЕКТРИЧЕСКИЙ

ГВОЗДЕЗАБИВАТЕЛЬ

ELEKTRILINE NAELAPÜSTOL

ELEKTRINIS VINUČIŲ KALIMO

ĮRANKIS

ELEKTRISKAIS NAGLOTĀJS

ELEKTRICKÁ NASTŘELOVAČKA

ELEKTRICKÁ KLINCOVAČKA

ELEKTRIČNO KLADIVO

ELEKTRIČNA ČAVLERICA

ΗΛΕΚΤΡΙΚΟ ΚΑΡΦΩΤΙΚΟ

ELEKTRİKLİ ÇİVİ TABANCASI

ELEKTROMOS SZÖGBELÖVŐ

PISTOL DE CUIE ELECTRIC

ЕЛЕКТРИЧЕСКИ ПИСТОЛЕТ

ЗА ДЪРВОДЕЛСКИ ПИРОНИ

Operating instructions - Original 5

Übersetzung der Original-Bedienungsanleitung 12

Traduction des instructions originales 22

Traduction des instructions originales 31

Traduzione delle istruzioni originali 40

Traducción de las instrucciones originales 48

Tradução das instruções originais 57

Översättning av originalinstruktionerna 66

Oversættelse af den originale vejledning 74

Oversettelse av originalinstruksjonene 82

Alkuperäisten ohjeiden käännös 90

Tłumaczenie oryginalnej instrukcji obsługi 97

Перевод оригинальных инструкций 106

Originaalkasutusjuhendi tõlge 116

Originalių instrukcijų vertimas 124

Sākotnējo lietošanas norādījumu tulkojums 131

Překlad originálního návodu 140

Preklad pôvodných pokynov 148

Prevod originalnih navodil 156

Prijevod izvornih uputa 164

Μετάφραση των πρωτότυπων οδηγιών 172

Orijinal talimatların çevirisi 182

Az eredeti utasítások fordítása 189

Traducerea instrucţiunilor originale 198

Превод на оригиналните инструкции 207

EN330

Original

Complies to relevant EU directives

GENERAL POWER TOOLS

SAFETY WARNINGS

WARNING!! Read all safety warnings

and all instructions. Failure to follow all

instructions listed below may result in

electric shock, ﬁre and/or serious person-

al injury.

Save all warnings and instructions for

future reference.

The term ”power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1)WORK AREA SAFETY

a) Keep your work area clean and well lit.

Cluttered benches and dark areas invite acci-

dents.

b)Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases, or dust. Power

tools create sparks which may ignite the dust

or fumes.

c) Keep bystanders, children, and visitors

away while operating a power tool. Dis-

tractions can cause you to lose control.

2)ELECTRICAL SAFETY

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of elec-

tric shock.

b)Avoid body contact with grounded surfac-

es such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d)Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the

risk of electric shock.

e) When operating a power tool outdoors,

use an extension cord suitable for out-

door use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f) If operating a power tool in a damp lo-

cation is unavoidable, use a ground fault

circuit interrupter protected supply. Use of

a ground fault circuit interrupter reduces the

risk of electric shock.

3)PERSONAL SAFETY

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b)Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before con-

necting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the

switch or energizing power tools that have

the switch on invites accidents.

d)Remove any adjusting key or wrench be-

fore turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables bet-

ter control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing

and gloves away from moving parts.

Loose clothes, jewellery or long hair can be

caught in moving parts.

g)If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and proper-

ly used. Use of dust collection can reduce

dust-related hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become compla-

cent and ignore tool safety principles. A

careless action can cause severe injury within

a fraction of a second.

4)POWER TOOL USE AND CARE

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better and

safer at the rate for which it was designed.

b)Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or storing

power tools. Such preventive safety meas-

ures reduce the risk of starting the power tool

accidentally.

d)Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-

age of parts and any other condition that

may affect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g)Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazard-

ous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slip-

pery handles and grasping surfaces do not

allow for safe handling and control of the tool

in unexpected situations.

5)SERVICE

a) Have your power tool serviced by a qual-

iﬁed repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

TACKER SAFETY WARNINGS

• Always assume that the tool contains fas-

teners. Careless handling of the tacker can

result in unexpected ﬁring of fasteners and

personal injury.

• Do not point the tool towards yourself or

anyone nearby. Unexpected triggering will

discharge the fastener causing an injury.

• Do not actuate the tool unless the tool is

placed ﬁrmly against the work piece. If the

tool is not in contact with the work piece, the

fastener may be deﬂected away from your

target.

• Disconnect the tool from the power

source when the fastener jams in the

tool. While removing a jammed fastener, the

tacker may be accidentally activated if it is

plugged in.

• Use caution while removing a jammed

fastener. The mechanism may be under

compression and the fastener may be force-

fully discharged while attempting to free a

jammed condition.

• Do not use this tacker for fastening

electrical cables. It is not designed for elec-

tric cable installation and may damage the

insulation of electric cables thereby causing

electric shock or ﬁre hazards.

TECHNICAL SPECIFICATION

Model Number EN330

Voltage 220-240 V~, 50Hz

Current 9.6 A

Brad type, length Rapid T8, 15-30 mm

Magazine Capacity 110 brads (145 mm)

Speed, maximum continuous 20 shots/min

Tool Weight 1.325 kg

NOISE EMISSION

A-weighted sound pressure level LpA=85.4 dB(A), uncertainty K=3

dB(A)

A-weighted sound power level LwA=96.4 dB(A), uncertainty K=3

dB(A)

Recommendation for the operator to wear hearing protection.

VIBRATION

Vibration total value=4.626 m/s2 , uncertainty K=1.5 m/s2

The declared vibration total value has been measured in accordance

with a standard test method and may be used for comparing one tool

with another.

The declared vibration total value may also be used in a preliminary

assessment of exposure.

WARNING

The vibration emission during actual use of the power tool can

differ from the declared total value depending on the ways in

which the tool is used.

It’s needed to identify safety measures to protect the operator that are

based on an estimation of exposure in the actual conditions of use

(taking account of all parts of the operating cycle such as the times

when the tool is switched off and when it is running idle in addition to

the trigger time).

ASSEMBLY

DEFINITIONS (FIGURE 1)

: Trigger

: Power Cord

: On/Off Power Switch

: Power Adjuster

: Magazine Latch

: Indicator Window

: Brad Output

: Safety Yoke

LOAD BRADS INTO THE MAGAZINE

1. Turn off the power switch and unplug the nailer (Figure 2).

2. Squeeze latch and slide magazine open (Figure 3).

Inhaltsverzeichnis

Sprachen:

Andere Rapid Nagelpistole Handbücher

Rapid

Rapid PFN3490 Bedienungsanleitung

Rapid

Rapid PCN45 Bedienungsanleitung

Rapid

Rapid PMP171 Bedienungsanleitung

Rapid

Rapid PFN3490 Bedienungsanleitung

Rapid

Rapid Airtac PB131 Bedienungsanleitung

Rapid

Rapid Airtac PB161 Bedienungsanleitung

Rapid

Rapid BN50 Bedienungsanleitung

Rapid

Rapid PBS151 Bedienungsanleitung

Rapid

Rapid Airtac PBS121 Bedienungsanleitung

Rapid

Rapid PN21-40 M2 Bedienungsanleitung

Rapid

Rapid BNX50 Bedienungsanleitung

Rapid

Rapid Airtac PB161 Bedienungsanleitung

Rapid

Rapid PCN90 Kurzanleitung

Rapid

Rapid Airtac PB131 Betriebsanleitung

Rapid

Rapid Airtac PB131 Bedienungsanleitung

Rapid

Rapid PRO PBS151 Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Grizzly

Grizzly T20644 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung