RBH Access Technologies Integra 32 UNC100 Bedienungsanleitung

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 1of 21 RBH Access Technologies Inc.

UNC100 Integra/Axiom Light Manual

2018-12-17–V1.3

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 2of 21 RBH Access Technologies Inc.

agreement containing restrictions on its use. No part of this book may be copied or distributed,

transmitted, stored in a retrieval system, or translated into any human or computer language, in any form

or by any means, electronic, mechanical, magnetic, manual, or otherwise, or disclosed to third parties

without the express written consent of RBH Access Technologies Inc., Brampton, Ontario, Canada.

Trademark

Integra™is the trademark of RBH Access Technologies Inc. Windows is a trademark of Microsoft

Corporation. All other product names mentioned herein are the property of their respective owners. Use

of a term in this book should not be regarded as affecting the validity of any trademark or service mark.

Disclaimer

This book is provided as is, without warranty of any kind, either express or implied, including but not

limited to performance, merchantability, or fitness for any particular purpose. Neither RBH Access

Technologies Inc. nor its dealers or distributors shall be liable to any person or entity with respect to any

liability, loss, or damage, caused, or alleged to have been caused directly or indirectly by this information.

Further RBH Access Technologies Inc. reserves the right to revise this publication, and to make changes to

the content hereof from time to time, without the obligation of RBH Access Technologies Inc. to notify any

person or organization of such revision or changes.

RBH ACCESS TECHNOLOGIES INC.

2 Automatic Road, Suite 108

Brampton, Ontario

CANADA

L6S 6K8

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 3of 21 RBH Access Technologies Inc.

Revision History

Editor

Revision

Comment

Date mm/dd/yy

1.0

First Release

08/13/13

1.1

Removed reference to fire input

Removed partial firmware upgrade (formats)

Added dip-switch 5

Added Revision History

Updated copyright

Eliminated reference to rack mount type

Clarified the use of the Power Input/ Output

Moved all cable specs to one location.

Moved all input specs to one location.

Moved all output specs to one location.

Reduced the number of pages.

03/19/14

1.1

Minor editing of text.

03/24/14

1.2

Changing output voltage from

12V to 12v –14v

Changing battery charger spec

07/21/14

1.2

Editing of text:

-Changed graphic

-Removed relevant information

-Confirmed correct specifications

07/30/14

1.2

Added ULC text.

Reconfigured order of pages.

08/06/14

1.3

Minor editing of text.

Replaced UNC-100 Reader connection

picture

11/17/16

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 4of 21 RBH Access Technologies Inc.

Copyright Notice ............................................................................................................................................ 2

Trademark...................................................................................................................................................... 2

Disclaimer.......................................................................................................................................................2

Revision History .............................................................................................................................................3

UNC-100 Graphics..........................................................................................................................................6

Introduction ...................................................................................................................................................7

ULC-S319-05 III.............................................................................................................................................. 7

Battery Charger.............................................................................................................................................. 7

Reverse Battery Protection............................................................................................................................ 7

Battery Test.................................................................................................................................................... 7

Fuse Monitoring............................................................................................................................................. 7

Diagnostic LED’s............................................................................................................................................. 7

Tamper Detection .......................................................................................................................................... 8

Power Input / Output..................................................................................................................................... 8

Communication.............................................................................................................................................. 8

Networks........................................................................................................................................................ 8

RS485 Applications......................................................................................................................................... 8

DIP Switch Settings ........................................................................................................................................ 9

Controller Addressing .................................................................................................................................... 9

RS485 Port Baud Rate Selection ..................................................................................................................10

Host Connection...........................................................................................................................................10

PC to UNC100 Connection ........................................................................................................................... 10

Integra™ Network ........................................................................................................................................11

UNC100 & IOC8 Connection ........................................................................................................................12

RS485 Configuration ....................................................................................................................................14

Reader Interface ..........................................................................................................................................15

Reader Connection ......................................................................................................................................15

Outputs ........................................................................................................................................................16

Switching Inductive Devices (Locks, Bells) ...............................................................................................16

Output Operation ....................................................................................................................................17

General Purpose Output......................................................................................................................17

Lock Output..........................................................................................................................................17

Handicap Output..................................................................................................................................17

Forced / Tamper...................................................................................................................................17

Modem Power Output.........................................................................................................................17

Supervised Inputs.........................................................................................................................................18

Input Circuit Types ....................................................................................................................................... 18

Input Applications........................................................................................................................................19

Request to Exit (RTE)................................................................................................................................ 19

Door Contact (DC).................................................................................................................................... 20

General Purpose ...................................................................................................................................... 20

Access Point Operating Modes ....................................................................................................................20

High Security ........................................................................................................................................20

Unlocked ..............................................................................................................................................20

Tamper.................................................................................................................................................20

Lockout Alarm ...................................................................................................................................... 20

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 5of 21 RBH Access Technologies Inc.

Door Held Open Warning.....................................................................................................................20

Door Held Open Alarm.........................................................................................................................20

Keypad / Reader Combination.............................................................................................................20

Access Granted ....................................................................................................................................20

Access Denied ......................................................................................................................................20

UNC100 Specification...................................................................................................................................21

Cable Specification.......................................................................................................................................21

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 6of 21 RBH Access Technologies Inc.

UNC-100 Graphics

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 7of 21 RBH Access Technologies Inc.

Introduction

The UNC100 has been designed as a two door access control panel with a built in local area network

interface, that can also provide a single door in/out access point.

The network interface also utilizes a POE (power over Ethernet) converter.

ULC-S319-05 III

For ULC-S319-05 III compliance, all wiring into the panel’s cabinet must enter through metal conduit.

Also be sure to mount the panel in a protected area.

Battery

To protect the battery from being drained during shipping/storage of the UNC100, there is a small paper

between the battery and the panel. This must be removed before powering up the panel.

Battery Charger

The battery charger routes input power from the 13.8v input source or POE module and constantly

monitors the battery voltage.

Reverse Battery Protection

A combination of a three ampere diode and a 1.6 amp thermal fuse protects against accidental connection

of a battery in the reverse direction.

Battery Test

A battery test cycle is operator initiated or scheduled. When initiated the charger is turned off and a 24Ω

resistor provides a load to the battery for about ten seconds. If during this period the voltage drops below

10 volts a battery alarm message is sent to the host, otherwise a battery normal message is sent.

Fuse Monitoring

Besides monitoring the battery voltage the UNC100 also monitors the input voltage (DC), auxiliary voltage

(aux) and the reader voltage (reader) and reports to the host whenever the state changes.

Diagnostic LED’s

The RS485 circuit has a red and green LED to indicate when a signal is received or transmitted.

Host Comms LED is a bicolour LED that turns red when receiving data from the host, and turns green when

transmitting of data.

The Run LED will flash slowly when connected to the host and quickly when not connected.

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 8of 21 RBH Access Technologies Inc.

The Trouble LED will flash when there is a power problem such as a low battery or low auxiliary power is

detected.

Tamper Detection

A tamper wire may be connected to JP1 located close to the center of the board. A short to this input is

normal and an open is alarm.

Power Input / Output

Located on the top right corner of the board is a jumper that selects if the power terminals are to be used

to supply power or provide power. Select “OUT” when using a POE supply and require 13.8V @ 500ma for

other equipment.

When not using POE, the jumper should be set to “IN”.

The UNC100 controller requires 13.8VDC to be supplied from an external source. (Note: Although the unit

can run on 12VDC, you will need 13.8VDC to be able to charge backup batteries.

Communication

The UNC100 has one RS485 port and an Ethernet 10/100 interface. Communications from the host

computer running Integra™software is achieved via the Ethernet interface. The UNC100’s RS485 channel

may be programmed as either NONE, INTEGRA or IOC8. Use the DIP switches to select the baud rate for

the Integra™ network communications as 9600, 38400, 57600, or 115200.

Networks

There are two networks supported by the UNC100 these are:

1) Host Communications through the Ethernet.

2) RS485 Communications;

a) Integra Network for devices such as additional IRC-2000s or URC-2000s starting at address 2, and

PC100s.

b) IOC8 Network for IOC8 input/output expansion boards.

RS485 Applications

Application name

Description

None

No connection to other devices.

INTG

The Integra selection connects the UNC100 controller to

other Integra units (e.g. IRC-2000s and URC-2000s) on a high-

speed RS485 network.

IOC8

This selection is used to connect the UNC100 with up to four

IOC8 boards and can not be used for connection with other

Integra panels.

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 9of 21 RBH Access Technologies Inc.

DIP Switch Settings

The UNC100 DIP switch controls the device’s address and serial port baud rate.

Note: To clear panel memory –all DIP switches must be off and the unit re-powered.

DIP Switch

Function

1 - 4

Controller Address

Ethernet Secure Mode1

6,7

Controller Baud Rate

Not used

Controller Addressing

Switch 1

Switch 2

Switch 3

Switch 4

Address

Off

Clear Memory

Off

Use DIP switches 1, 2, 3, and 4 to select the controller address. The address is binary coded and the switch

settings for all fifteen possible addresses are given below.

DIP switch 5 up will enables Ethernet Secure Mode. This will prevent access to the controller’s programming

through the Ethernet.

UNC100 Integra/Axiom Light Hardware Manual V1.3 Page 10 of 21 RBH Access Technologies Inc.

RS485 Port Baud Rate Selection

The controller's serial port baud rate is set with controller DIP switches 6 and 7. This setting determines

the speed used to communicate with other controllers. The baud rate must be the same as the baud rate

set for all Integra™ units on the network. The default baud rate is 9600.

Controller Baud Rate Selection

DIP Switch 6

DIP Switch 7

Baud Rate

OFF

9600

OFF

38400

Host Connection

The controller is connected to the local Ethernet via a static IP address only [default address is

192.168.168.125]. To change the IP address of the unit you can either use IP Locator [a utility program

provided by RBH] or Telnet. The communications configuration is set in the Integra™software under the

network’s properties under the Comms tab.

PC to UNC100 Connection

For ULC-S319-05 III compliance, all wiring into the panel’s cabinet must enter through metal conduit.

Also be sure to mount the panel in a protected area.

Name

Defaults

Description and notes

Inhaltsverzeichnis

Andere RBH Access Technologies IP-Zugriffskontrollsysteme Handbücher

RBH Access Technologies

RBH Access Technologies UNC100 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung