RCA 25210 Bedienungsanleitung

2-Line Intercom Speakerphone

DECT6.0 Cordless Handset

Telephone Answering System

User’s Guide

Please read this manual

before operating product

for the ﬁrst time.

Model 25210

Important Information

NOTICE: This product meets the applicable Industry Canada technical

speciﬁcations.

Operation is subject to the following two conditions: (1) This device may

not cause interference, and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

The equipment must be installed using an acceptable method of

connection. The customer should be aware that compliance with the above

conditions may not prevent degradation of service in some situations.

Repairs to certiﬁed equipment should be made by an authorized Canadian

maintenance facility designated by the supplier. Any repairs or alterations

made by the user to this equipment, or equipment malfunctions, may give

the telecommunications company cause to request the user to disconnect

the equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

water pipe systems, if present, are connected together. This precaution may

be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves,

but should contact the appropriate electric inspection authority, or

electrician, as appropriate.

NOTES: This equipment may not be used on coin service provided by the

telephone company.

Interference Information

This equipment generates and uses radio frequency energy which may

interfere with residential radio and television reception if not properly

installed and used in accordance with instructions contained in this

manual. Reasonable protection against such interference is ensured,

although there is no guarantee this will not occur in a given installation.

If interference is suspected and veriﬁed by switching this equipment on

and off, the user is encouraged to try to correct the interference by one

or more of the following measures: Reorient the radio/television receiver’s

antenna, relocate the equipment with respect to the receiver, plug the

equipment and receiver into separate circuit outlets. The user may also wish

to consult a qualiﬁed radio/television technician for additional suggestions.

This equipment has been fully tested and complies with all limits for Class B

computing devices pursuant to part 15 FCC Rules and Regulations.

Important Information

Telephone Network Information

Should your equipment cause trouble on your line which may harm the

telephone network, the telephone company, where practicable, may notify

you that temporary discontinuance of service may be required. Where prior

notice is not practicable and the circumstances warrant such action, the

telephone company may temporarily discontinue service immediately.

The telephone company may make changes in its communications facilities,

equipment, operations or procedures where such action is required in the

operation of its business. If these changes are expected to affect the use

or performance of your telephone equipment, the telephone company will

likely give you adequate notice to allow you to maintain uninterrupted

service.

Notice must be given to the telephone company upon termination of your

telephone from your line.

Licensing

Licensed under US Patent 6,427,009.

Hearing Aid Compatibility

This telephone system meets FCC standards for Hearing Aid Compatibility.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with a minimum distance of 20 centimeters between the

radiator and your body. This transmitter must not be co-located or

operated in conjunction with any other antenna or transmitter.

For body worn operation, this phone has been tested and meets the FCC

RF exposure guidelines when used with the belt clip supplied with this

product. Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

Information for DECT Product

This telephone is compliant with the DECT 6.0 standard which

operates in the 1.92GHz to 1.93GHz frequency range.

Installation of this equipment is subject to notiﬁcation and

coordination with UTAM. Any relocation of this equipment must

be coordinated through and approved by UTAM. UTAM may be contacted at

1-800-429-8826.

Important InformatIon ............................ 2

Interference InformatIon......................... 2

telephone network InformatIon .............. 3

lIcensIng ................................................ 3

hearIng aId compatIbIlIty ....................... 3

fcc rf radIatIon exposure statement .... 3

InformatIon for dect product ............... 3

IntroductIon ........................................... 6

parts checklIst....................................... 6

telephone Jack requIrements................... 6

InstallatIon ............................................ 7

Digital Security SyStem .............................7

Important InstallatIon guIdelInes ............ 7

handset layout ...................................... 8

base layout............................................ 9

InstallIng the phone .............................10

inStalling the hanDSet Battery.............. 10

BaSe Station.............................................11

programmIng the phone ......................13

StanDBy Screen ....................................... 13

Programming FunctionS......................... 13

Phone Setting.......................................... 14

Date/time................................................. 14

auto anSwer (only aPPlicaBle For hanDSet)........

auto anSwer intercom (aPPlicaBle For BaSe

anD hanDSet)...................................... 15

Dial moDe (only aPPlicaBle For BaSe).... 15

area coDe (only aPPlicaBle For BaSe).... 15

regiStration (only aPPlicaBle to hanDSet)16

remove hanDSet...................................... 16

De-regiSter (only aPPlicaBle For BaSe). 17

SeconD call alert ................................. 17

hanDSet name (only aPPlicaBle For hanDSet)......

uPDate hanDSet liSt (only aPPlicaBle For

BaSe)................................................... 17

DiSPlay Setting ........................................ 18

contraSt.................................................. 18

Backlight (only aPPlicaBle For BaSe)..... 18

SounD Setting ......................................... 18

ring Volume ........................................... 19

key tone .................................................. 19

telephone operatIon .............................19

making callS with the corDleSS hanDSet19

making callS in the SPeakerPhone moDe

(From the BaSe).................................. 20

making call in the SPeakerPhone moDe

(From the hanDSet) ............................ 20

making callS with the oPtional heaDSet20

Pre-Dialing.............................................. 21

anSwering acall ................................... 21

Switching Between the SPeakerPhone,

hanDSet, anD heaDSet moDe ............ 21

BaSe .................................................. 21

corDleSS hanDSet ............................. 21

mute.................................................. 22

Donot DiSturB....................................... 22

FlaSh........................................................ 22

inSerting aPauSe in the Dialing Sequence

reDial....................................................... 22

reviewing the reDial numBerS............... 23

Storing areDial recorD in Phone Book23

tranSFerring acall to another extenSion

receiving atranSFerreD call From another

extenSion............................................ 23

ringer on/oFF anD ringer Volume ...... 24

SPeakerPhone, hanDSet, anD heaDSet Vol-

ume ..................................................... 24

holD......................................................... 24

conFerence callS.................................... 24

Join acall in ProgreSS:.................... 24

three-way conFerence call By an inter-

com call: ........................................... 24

three-way conFerence call with two

lineS:.................................................. 24

Four-way conFerence call (line 1 +

line 2 + 2 extenSion):...................... 25

Intercom calls .....................................25

one-touch intercom .............................. 25

anSwering an intercom call................. 25

Page ......................................................... 25

auto StanDBy .......................................... 26

caller Id (cId) ...................................26

receiving anD Storing ciD recorDS...... 26

reviewing ciD recorDS.......................... 26

Saving aciD recorD to Phone Book

memory.............................................. 27

Deleting aciD recorD........................... 27

Deleting all call recorDS..................... 27

Dialing Back ........................................... 27

iFyou ProgrammeD your local area

coDe................................................... 27

iFyou DiD not Program your local

area coDe ......................................... 28

call waiting caller iD.......................... 28

Table of Contents

memory log and phone book (dIrectory)

memory ............................................28

aDDing Phone Book entrieS................... 29

storIng record In one-touch dIalIng (only

applIcable for base) ...........................29

reviewing Phone Book recorDS ............ 29

eDiting aPhone Book recorD................ 30

coPying aPhone Book recorD .............. 30

Deleting aPhone Book recorD ............. 31

Dialing aPhone Book recorD ............... 31

Dial aPhone Book recorD while in talk

moDe: ................................................. 31

Dial aPhone Book recorD while review-

ing it:................................................. 31

voice mail SyStem.................................. 32

toliSten to your voice mail meSSageS

From the BaSe unit in iDle moDe. ...... 32

toliSten to your voice mail meSSageS

From the hanDSet in iDle moDe. ........ 32

Programming the voice mail numBerS33

changIng the battery............................34

battery safety precautIons ...................34

dIsplay messages .................................35

handset sound sIgnals.........................35

troubleshootIng guIde ..........................36

telePhone SolutionS................................ 36

caller iD SolutionS................................ 37

Battery..................................................... 37

general product care ..........................38

causes of poor receptIon .....................38

warranty.............................................39

accessory InformatIon..........................42

Introduction

CAUTION: When using telephone equipment, there are basic

safety instructions that should always be followed. Refer to

the IMPORTANT SAFETY INSTRUCTIONS provided with this

product and save them for future reference.

IMPORTANT: Because cordless phones operate on electricity, you should

have at least one phone in your home that isn’t cordless, in case the power

in your home goes out.

Connections & Setup

Parts Checklist

Make sure your package includes the following items:

Base

Handset

Handset battery

pack

Telephone

2- Line cords

AC power

adaptor

Battery

Compartment

Cover

Desk Stand

For Model 25210RE2 there will be ONE additional handset, belt clip, AC

power adaptor, battery pack, cover and charge cradle than shown above.

Telephone Jack Requirements

To use this phone, you will need an RJ11C (for

a single line) or a RJ14C (for two lines) type

modular phone jack, which might look like the

one pictured here, installed in your home or

ofﬁce. If you don’t have either modular jack,

call your local phone company to ﬁnd out how

to get one installed.

Modular

telephone line

jack

Wall plate

Short Line Cord

Belt Clip

Connections & Setup

Installation

Digital Security System

Your cordless phone uses a digital security system to protect against false

ringing, unauthorized access, and charges to your phone line.

INSTALLATION NOTE: Some cordless telephones operate at frequencies that

may cause or receive interference with nearby TVs, microwave ovens, and

VCRs. To minimize or prevent such interference, the base of the cordless

telephone should not be placed near or on top of a TV, microwave ovens,

or VCR. If such interference continues, move the cordless telephone farther

away from these appliances.

Certain other communications devices may also use the 1.9 GHz frequency

for communication, and, if not properly set, these devices may interfere

with each other and/or your new telephone. If you are concerned with

interference, please refer to the owner’s manual for these devices on how to

properly set channels to avoid interference. Typical devices that may use the

1.9 GHz frequency for communication include wireless audio/video senders,

wireless computer networks, multi-handset cordless telephone systems, and

some long-range cordless telephone systems.

Important Installation Guidelines

• Avoid sources of noise and heat, such as motors, ﬂuorescent lighting,

microwave ovens, heating appliances and direct sunlight.

• Avoid areas of excessive dust, moisture and low temperature.

• Avoid other cordless telephones or personal computers.

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is

speciﬁcally designed for wet locations.

• Never touch non-insulated telephone wires or terminals, unless the

telephone line has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

Connections & Setup

Handset Layout

display

DND/Privacy

(button) Spk

(Speaker button)

DIR

(button)

CID

(button)

3 Soft keys

VOL +/-

(buttons)

Talk

(button)

Off

(button)

Redial

(button)

Menu/Flash

(button)

Exit

(button)

Int/Hold

(button)

Mute/Del

(button)

Visual Indicator

*Tone

(button)

#Pause

(button)

Base Layout

Connections & Setup

Delete

(button)

Exit

(button) 3 Soft Keys

DIR

(button)

CID

(button)

Vol +/-

(buttons)

Line 1 & 2

(buttons)

Intercom

(button)

Page

(button)

Redial

(button)

Hold

(button)

Headset

(button)

Flash

(button)

Mute

(button) Speaker

(button)

Charge

LED

One Touch

(1-10)

buttons

#Pause

(button)

DND

(button)

Voice mail2

(button)

Voice mail1

(button)

Privacy

(button)

Connections & Setup

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of ﬁre or personal injury, use

only the Thomson Inc. approved Nickel-metal Hydride (Ni-

MH) battery model 5-2734, which is compatible with this

unit.

1. Locate battery which is packaged inside a plastic bag and is separate

from the handset.

2. Locate the battery compartment on the back of the handset.

3. Plug the battery pack cord into the jack inside the compartment.

NOTE: To ensure proper battery installation, the connector is keyed and can

be inserted only one way.

4. Insert the battery pack.

5. Close the battery compartment by placing the handset back cover

slightly higher than the handset and then sliding the cover down into

position.

BATTERY

BLACK WIRE

RED WIRE

PRESS DOWN FIRMLY

Andere Handbücher für 25210

Inhaltsverzeichnis

Sprachen:

Andere RCA Konferenztelefon Handbücher

RCA

RCA 25001 Bedienungsanleitung

Beliebte Konferenztelefon Handbücher anderer Marken

Polycom

Polycom SoundStation 2W Service-Handbuch

Vixtel

Vixtel glass 1100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific OS200 Bedienungsanleitung

Polycom

Polycom SoundStation IP 4000 Bedienungsanleitung

AbleNet

AbleNet Prism C Bedienungsanleitung

Albrecht

Albrecht Multicom Bedienungsanleitung

Fortinet

Fortinet FortiFone FON-C70 Bedienungsanleitung

Avaya

Avaya B159 Series Bedienungsanleitung

Konftel

Konftel Konftel 55W Bedienungsanleitung

Mitel

Mitel 6867i Premium Bedienungsanleitung

Polycom

Polycom SoundStation 2W Service-Handbuch

Yealink

Yealink CP920 Bedienungsanleitung

Polycom

Polycom SoundStation IP 6000 Bedienungsanleitung

Mitel

Mitel 6970 IP Bedienungsanleitung

Yealink

Yealink CPE860 Fehlerbehebungshandbuch

Konftel

Konftel 60W Bedienungsanleitung

Mitel

Mitel UC360 Bedienungsanleitung

Cortelco

Cortelco CP4400 Series Einrichtungshandbuch