ACCESSORIES
Model RU-SMA1
Surface Mounting Adapter
891-5208A
Recommend Cutout:
STEP #1
Start the screws into the bottom of the RACK-UP but do
not install them all the way. Place the RACK-UP unit onto
the chassis. The screw heads will pass through the rear
position in the cutouts.
STEP #2
Slide the unit forward until the screws are seated in the
forward position of the cutout. Tighten the screws to
secure the unit in the chassis.
STEP #3
Secure the chassis to the mounting surface with the
screws.
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Installation/Operation
Declaration of Conformity available from rdlnet.com.
Sole EMC specications provided on product package.
Specications are subject to change without notice.
