RecorderGear B200W Bedienungsanleitung
USER MANUAL
B200W
WIFI HIDDEN CAMERA
In order to comply with 18 U.S. Code § 2512
federal law, the audio recording function is
disabled on this device. If you are located in a
country or a part of a government entity where
this law does not apply, contact us for details on
enabling audio recording. Please be familiar with
your country and state surveillance laws before
using this product. RecorderGear products are
sold NOT for illegal use and are sold for their
intended legal use only. RecorderGear will not be
held liable for any illegal use of this product.
This Device is Compliant with USA
Surveillance Laws
1 Year Warranty
All RecorderGear™ brand products are
backed by our 1 Year Warranty. Visit
WWW.RECORDERGEAR.COM
MID: IP01S
MADE IN CHINA
MULTIPLE HIDDEN CAMERAS.
MULTIPLE LOCATIONS.
ONE APP.
4
5
Table Of Contents
Section & Title Page #
1Charging 6
2Insert/Eject Micro SD Card 7
3Power On/Off 8
4Continuous/Motion Detection
Modes 8
5Access Saved Recordings 11
6Download The RecorderGear APP 12
7Set-up Wi-Fi IP Camera Function 13
8Understanding The RecorderGear
APP 20
9Live Stream Screen Settings 25
10 Device Settings Menu 28
11 Device Settings 30
12 Troubleshooting 35
13 The Specs 37
6
1Charging
The B200W operates o wall power
or batteries. If using batteries, we
recommend fully charging the
B200W before your rst use. It takes
approximately 3.5 hrs to charge.
1. Charging The B200W
A. Open the back of the B200W by
sliding the cover.
B. Using the included mini USB cable,
plug the B200W into a computer USB
port or a USB wall adapter.
C. The charging indicator light on the
back of the B200W will light up red to
indicate it is charging.
NOTE: To operate the B200W using
wall power (instead of batteries), just
plug it in as if you were charging
7
it.
2Insert/Eject Micro SD
Card
The B200W supports up to a 128GB
micro SD card. The purpose of the
SD card is to store the bulk of your
surveillance footage. Without an SD
card, you can still live stream video,
get motion activated alerts, & record
video clips to your iOS/Android
device using the App (see section 6).
1. Insert A Micro SD Card
A. Open the back of the B200W &
insert a micro SD card into the card
slot. We recommend a class 10 SD card.
B. You will feel a click when the micro
SD card has been inserted correctly.
2. Remove The Micro SD card
A. Push the card in until you feel a
spring release. The card will eject when
you let go.
8
3Power On/O
A. Power On - Make sure a micro
SD card is inserted & slide the power
switch to the ON position (located
under the back cover).
B. Power O - Slide the power switch
to OFF
4Continuous/Motion
Detection Modes
The B200W can record in either
continuous or in motion activation.
The default mode is continuous; it
will automatically start recording in
this mode when it is initially powered
on. If you set it to motion activation,
it will run in this mode the next time
you power it on.
1. Continuous Recording
A. Make sure a micro SD card is
9
inserted & slide the power switch to
the ON position.
B. The side indicator light will light up
blue for about 5 seconds & then turn
OFF. After about 15 seconds, the light
will turn back on for 20 seconds & then
turn back OFF for 10 seconds. After the
10 seconds, it will begin flashing.
C. Once the blue light begins flashing
continuously, recording has begun.
NOTE: When the B200W is connected
as a Wi-Fi IP camera, the side indicator
light will no longer flash, but be a solid
blue light. To turn off the indicator
light, see section 9-2D.
2. Motion Detection Recording
Before changing the mode to motion
detection, download & connect the
camera to the RecorderGear App (See
sections 6-8).
10
A. After completing sections 6-8 open
the RecorderGear App.
B. Press the Camera Settings icon
to the right of the online camera on
the Live Video/Main Page & select
Device Settings.
C. Select the Recording Settings &
select Record.
D. Select Motion Detection
E. Select OK to save the settings.
F. Enter Alarm Settings & change the
Motion Detection Sensitivity
NOTE: Make sure you change the
Motion Detection Settings in the
Alarm Settings. If it’s DISABLED, your
camera will NOT record in motion
detection. (See section 11-1A)
3. Stop Video Recording
Slide the power switch to the OFF
position.
Inhaltsverzeichnis
Andere RecorderGear Sicherheitskamera Handbücher
RecorderGear
RecorderGear MC100 Bedienungsanleitung
RecorderGear
RecorderGear PF100 Bedienungsanleitung
RecorderGear
RecorderGear SC550W Bedienungsanleitung
RecorderGear
RecorderGear LC500W Bedienungsanleitung
RecorderGear
RecorderGear B180W Bedienungsanleitung
RecorderGear
RecorderGear PC900 Bedienungsanleitung
RecorderGear
RecorderGear BC50 Bedienungsanleitung
RecorderGear
RecorderGear AC50 Bedienungsanleitung
