ReelCraft 5000 Series Bedienungsanleitung

1. Do not use reel at higher pressures or temperatures than listed on

the back of this bulletin.

2. Remove all spring tension before beginning dissassembly process.

SAFETY

Operating Instructions

Series 5000 Spring Driven Hose Reels

Medium Pressure Model Numbers:

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 484-884 Rev: 5/2013

Dimensions

A 15”

B 16 1/4”

C 9 3/4”

D 2 1/2”

E 7”

5400 EMP 5625 EMP

5600 EMP 5630 EMP

INSTALLATION: A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION: Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE: 1. Remove 1/4-20 hex nuts (4) which fasten the hose guide enclosure to the reel back cover and pull off the

enclosure.

2. Wind spool flange clockwise-facing swivel-until spring is tight.

3. Back off three turns and latch.

4. Insert hose through roller guide.

5. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS: To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS: Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

MOUNTING: The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or

ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing

the 1/4-20 hex nuts (4) fastening the hose guide enclosure to the reel back cover. Shift the hose guide

enclosure to the desired position and replace the 1/4-20 hex nuts. NOTE: For proper installation in wall mount

applications, ensure reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause

latching issues.

Series 5000 Spring Driven Hose Reels

Page 2 www.reelcraft.com

17 18

Item # Part # # Req. Description Item # Part # # Req. Description Item # Part # # Req. Description

1 500102 1 Case and Cover Assembly 12 500004 1 Reel Cover 24 300002 7 10-32 x 1/2” Screw

2 300001 4 10-32 x 3/8” Screw 13 300070 4 1/4-20 Zinc Nyloc Nut 25 S400012 1 Latch Bushing

3 S257-33 1 Swivel Union 14 500101 1 Base Assembly 26 400020 1 O-ring

4 S600595-1 1 Swivel Assembly 16 S261360 1 Spring Case Stud 27 S400109 1 Latch Plate Assembly

5 300031 2 1” Snap Ring 17 S500103 1 Spring Case Assembly 28 300035 1 10-32 x 1” Screw

6 300034 2 Spacing Washer 18 300006 1 3/8-16 x 1/2” Set Screw 30 261650-1 2 1/4-20 Zinc Nyloc Nut

7 S295-102 3 1/4-10 x 5/8” Screw 19 S300011 7 10-32 Hex Lock Nut 31 602305 1 Main Shaft

8 260022 1 Sheave Flange 20 S82-15 1 10-32 x 3/8” Nyloc Nut 34 S260019 1 Guide Roller Pin Kit

9 500006 1 Sheave Disk 21 S400021 1 Latch Bumper 35 HR2012 1 Hose Guide Assembly

10 S500019 1 Latch Cam 22 S32-136 1 10-24 x 3/8” Screw

11 S260648 1 Spring Arbor 23 S400018 1 Latch Spring

Item # Description # Req. 5400 EMP 5600 EMP 5625 EMP 5630 EMP

15 Drive Spring Assembly 1 S503755 S503755 S600625 S503755

29 U-bolt Hose Clamp 2 3-117440 3-117440 2-117440 3-117440

32 Hose Assembly 1 None None 12-260043 16-260043

33 Hose Bumper Assembly 1 None None 1-HR1004 1-HR1004

Hose I.D. and Length None None 3/8” x 25’ 3/8” x 30’

Reel Inlet Connection 3/8” F.P.T. 3/8” F.P.T. 3/8” F.P.T. 3/8” F.P.T.

Max. Operating Pressure 3000 P.S.I. 3000 P.S.I. 2600 P.S.I. 2600 P.S.I.

Max. Operating Temperature 210° F 210° F 210° F 210° F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ReelCraft Werkzeuge Handbücher

ReelCraft

ReelCraft LP80000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5005 Series Bedienungsanleitung

ReelCraft

ReelCraft PW7000 Series Bedienungsanleitung

ReelCraft

ReelCraft 82100 OLP-HTH Bedienungsanleitung

ReelCraft

ReelCraft SW7000 Series Bedienungsanleitung

ReelCraft

ReelCraft E9000 Series Datenblatt

ReelCraft

ReelCraft 7600 Bedienungsanleitung

ReelCraft

ReelCraft 5000 Series Bedienungsanleitung

ReelCraft

ReelCraft TW7400 OLP118 Bedienungsanleitung

ReelCraft

ReelCraft 5400 OLP Gebrauchs- und Pflegehandbuch

ReelCraft

ReelCraft REELSAFE RS7000 Series Bedienungsanleitung

ReelCraft

ReelCraft 6800 Series Bedienungsanleitung

ReelCraft

ReelCraft 81100 OHP Bedienungsanleitung

ReelCraft

ReelCraft 3700 Series Bedienungsanleitung

ReelCraft

ReelCraft 5000 Series Bedienungsanleitung

ReelCraft

ReelCraft 30000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5600 OLB Bedienungsanleitung

ReelCraft

ReelCraft 7000 Series Bedienungsanleitung

ReelCraft

ReelCraft TH5000 Series Bedienungsanleitung

ReelCraft

ReelCraft 80000 Series Bedienungsanleitung

ReelCraft

ReelCraft G 3050 Bedienungsanleitung

ReelCraft

ReelCraft 7000 Series Bedienungsanleitung

ReelCraft

ReelCraft RS7000 Series Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung