Reiner ChronoDater 920 Bedienungsanleitung

Chipcard reader

Ribbon cassette

Connection socket for mains adapter

RS-232 interface

ChipCard

Operating elements

Display

Housing ﬂap

Paper stop

Trigger table

Position marks

Trip switch

ChronoDater 920/922/925

Display and Button functions

Depending on model, your ChronoDater will have dierent setting options.

The display is structured according to the following zones.

- Model indication.

- Texts, date, time and/or numbering set.

- Menu bar with menu items and commands.

The buttons [t] or [u] navigate in the menus or select parameters.

- Four push-buttons

Each button is assigned to the menu item or command that is indicated in

the menu bar above it.

ChronoDater 920/922/925

Contents

Display and Button functions.................................................................................27

Important Notes ..................................................................................................30

Model Versions.....................................................................................................30

Your Safety

Safety, Description............................................................................................31

Safety Notes for the ChronoDater 920/922/925.......................................................32

1. Prepare and Commission

1.1. Commissioning, Ribbon Cassette..................................................................33

1.2. Attaching the Paper Stop ...........................................................................33

1.3. Adjusting Trip Switch ................................................................................33

1.4. Connecting Power Supply ...........................................................................34

1.5. Inserting Chipcard ....................................................................................34

1.6. Selecting Language...................................................................................34

1.7. Display Contrast .......................................................................................34

1.8. Print ......................................................................................................35

1.9. Switching the Device to Standby Mode ..........................................................35

1.10. Clean Device ............................................................................................35

2. Menu

2.1. Selecting Language...................................................................................36

2.2. Setting Date/Clock Time .............................................................................36

2.2.1. Setting Time .................................................................................36

2.2.2. Setting Date .................................................................................36

2.2.3. Setting Summer Time......................................................................37

2.3. Settings ..................................................................................................37

2.3.1. Setting Chipcard Function................................................................37

2.3.2. Trigger.........................................................................................38

2.3.3. Stand By Mode ..............................................................................39

2.3.4. Password Menu..............................................................................39

2.3.5. Display Contrast ............................................................................41

2.3.6. Counter........................................................................................41

2.4. Model/Version..........................................................................................42

2.5. SF Module................................................................................................42

ChronoDater 920/922/925

3. Recognising and Removing Interferences ............................................................43

4. Technical Data and Accessories

4.1. Type Plate................................................................................................44

4.2. Technical Data..........................................................................................45

4.3. Accessories..............................................................................................46

4.4. Transport and Disposal...............................................................................46

5. Contact...........................................................................................................47

6. Index .............................................................................................................48

ChronoDater 920/922/925

Model 922 with full text plate

Like model 920, but without date.

For text, logos, signatures, etc.

Important Notes

Before commissioning of the ChronoDater, always read the operating instructions and

in particular the safety notes with care. This prevents mistakes in handling of the electric

stamps and connected safety risks to keep you safe and avoid damage to the device.

Model Versions

Model 920 for date and text

Model 925 for date, time and text

Like model 920, but with additional time print.

Your Safety

Safety, Description

DANGER

Warnings of dangers that lead to death or severe injury directly if not observed.

WARNING

Warnings of dangers that may lead to death or severe injury if not observed.

CAUTION

Warnings of dangers that may lead to injury if not observed.

NOTICE

Warnings of dangers that may lead to property damage if not observed.

fYou are asked to perform actions here.

Notes and advice to make handling your ChronoDater 920/922/925 even easier.

ChronoDater 920/922/925

Safety Notes for the ChronoDater 920/922/925

WARNING

Danger of ﬁre from incorrect mains voltage.

fCheck that the local mains voltage matches the voltage indicated on the mains adapter.

CAUTION

Danger of electric shock when objects like paperclips or liquids fall into the device inside.

fPull the mains adapter from the socket and inform your specialist vendor

or the REINERService.

CAUTION

Danger of crushing your ﬁngers.

fDo not put your ﬁngers between the printing plate and the trigger table.

CAUTION

Danger of tripping and damage to the device from device lines placed freely in the room.

fPlace the device lines so that they do not pose any danger source!

NOTICE

Damage to the device due to improper transport.

fOnly use packaging that provides protection from impact and shock to the device!

NOTICE

Damage to the device by moisture.

fBefore commissioning, wait until the device has reached room temperature

and is completely dry!

NOTICE

Damage of the print plate or print wheels.

fDo not print on staples, paperclips or similar hard objects.

Only have repairs performed by trained specialists.

ChronoDater 920/922/925

1. Prepare and Commission

1.1. Commissioning, Ribbon Cassette

Inserting ribbon cassette Fig. D

Avoid skin contact with ribbon.

fSwivel housing ﬂap

upwards and remove it.

fRemove ribbon cassette

from the packaging.

fPush ribbon cassette

over the metal cover until it is ﬂush.

fTension ribbon. For this, turn the red dial of the ribbon cassette in the direction of the

arrow to the right.

fRe-attach the housing ﬂap

1.2. Attaching the Paper Stop

Attaching the paper stop Fig. A+ B

The paper stop services as lateral indicator of print position for the vouchers to the printed.

fApply paper stop

to the front edge of the trigger table from the left or right and put it

in the desired position.

1.3. Adjusting Trip Switch

Adjusting

trip switch Fig. A+ D

fRelease screw.

fPush trip switch to the desired position. A slight resistance and latching sound

are normal.

fTighten the screw until slight resistance is noticeable.

ChronoDater 920/922/925

1.4. Connecting Power Supply

Connecting power supply Fig. C

Use only genuine REINER accessories.

WARNING

Danger of ﬁre from incorrect mains voltage.

fCheck that the local mains voltage matches the voltage indicated on the mains adapter.

NOTICE

Incorrect order when connection to the mains may cause damage.

Observe the following order.

fConnect the mains adapter plug to the

ChronoDater connection socket.

fPlug the mains adapter into the socket.

The device starts adjustment of the print wheels.

1.5. Inserting Chipcard

Inserting Chipcard Fig. A+ E

The Chipcard function can be activated in the menu.

fSee „Setting Chipcard Function“ page 37

fInsert Chipcard

into the Chipcard reader in the direction of the arrow

printed on the card

The ChronoDater is ready for work.

1.6. Selecting Language

fSee „Selecting Language“ page 36

1.7. Display Contrast

fSee „Display Contrast“ page 41

ChronoDater 920/922/925

1.8. Print

The trigger table

and the housing ﬂap

have marks

attached that indicate

correct positioning of the print media.

The print action is activated by tripping the trip switch

with the print medium

or light pressure on the trigger table

NOTICE

Damage of the print plate or print wheels.

fDo not print on staples, paperclips or similar hard objects.

The maximum batch size is 2 mm.

Depending on text plate used, up to 5 copies (NCR) are possible.

fInsert paper to be printed on. Fig. B

Print is performed.

1.9. Switching the Device to Standby Mode

Standby mode

fPush [OFF] for 5 seconds.

The ChronoDater is in Standby mode.

1.10. Clean Device

fClean the top cover of the device with a soft cloth if required.

For stronger contamination, moisten the cloth with water and mild detergent.

CAUTION

Danger of electric shock when liquids enter into the device inside.

fPull the mains adapter from the socket and inform your specialist vendor

or the REINERService.

NOTICE

Cleaning agents that are too aggressive may damage the housing surface.

fDo not use any abrasives and plastic-dissolving cleaning agents for cleaning.

ChronoDater 920/922/925

Andere Handbücher für ChronoDater 920

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Reiner Postausrüstung Handbücher

Reiner

Reiner speed-i-Jet 798 Bedienungsanleitung

Beliebte Postausrüstung Handbücher anderer Marken

Radius

Radius LETTERMAN II Bedienungsanleitung

Radius

Radius LETTERMAN III Bedienungsanleitung

Neopost

Neopost IS-350 Bedienungsanleitung

FP optimail Bedienungsanleitung

Florence

Florence Package Protector PORT Bedienungsanleitung

FP centormail Bedienungsanleitung

SSS Siedle

SSS Siedle BG/SR 611 Series Bedienungsanleitung

Labelmate

Labelmate UCATS MINI Bedienungsanleitung

Pitney Bowes

Pitney Bowes SendPro C Handbuch

OMUARK

OMUARK Uark Bedienungsanleitung

FP Postbase Mini Bedienungsanleitung

Pitney Bowes

Pitney Bowes F731 Handbuch

XPOtool

XPOtool 60000 Bedienungsanleitung

Hefter Systemform

Hefter Systemform LO 440A Bedienungsanleitung

Pitney Bowes

Pitney Bowes 7H20C Bedienungsanleitung

eSafe

eSafe ENTRADA RANGE Bedienungsanleitung

Salsbury Industries

Salsbury Industries 4325D Bedienungsanleitung

MSL

MSL JET PLUS 500 Bedienungsanleitung